Latest activity

Gerry52 · Jul 21, 2025

Check with Utah Airguns. They should know.

rangur1 · Jul 21, 2025

From what I read, Tom moved to arizona. Apparently doing SubMOA barrels. I still see EVOL's, but has the slayer series been retired?

duchunter007 · Jul 21, 2025

Ezana4CE said:
To calculate BC you/the software needs a “near“ and “far” velocity reading. How far out does the Athlon read the “far” reading?

I haven't looked at the Althon very closely, but I don't think it has that capability, just like the Garmin; hence, I use two Cronos for that purpose.

Gerry52 · Jul 21, 2025

Fill to 4200, let it "settle" or cool for a couple hours, top off again. If you're going on TANK gauge reading those aren't terribly accurate.

actionpistol · Jul 21, 2025

Never had an epic. But I have 2 taipan vetrans and they are great shooters

Gerry52 · Jul 21, 2025

Have you tried an x-ring (x cross section) or the next size up of o-ring? As long as flange of valve is flush to neck of tank it's OK. Tanks are forgiving that way as long as nothing extrudes.

Avator · Jul 21, 2025

What I really don't want in my list is 50+ overpriced used gun/accessory that has 20 replies. Each reply is a repost of the deal.

So I filter to only show ads with 0 replies.

Kudos to AGN.. their search function is much better than other forums.

Scotay42 · Jul 21, 2025

This ^^^, use the filter, it works.

Perle · Jul 21, 2025

Racer88 said:
Haha... New to the gun (accessory) world, are ya?

If only I was.
Yeah I know. Doesn’t mean it’s right !! I notice they never list the thread size. Hehehehe

ChickenDumpling · Jul 21, 2025

This listing has been renewed

MDriskill · Jul 21, 2025

It will be clear once you get the beast in hand! Any Diana rifle made since the 1970's should have the date of manufacture, in "MM YY" format, in tiny digits on the left rear receiver.

This is a model 27S made in August 1978.

Avator · Jul 21, 2025

It is my understanding that you can filter your searches to only show what you are looking for.

Avator · Jul 21, 2025

I have the Xisico version of the GX-CS3e and a true Yong Heng (QB-01). I use the Xisico for filling guns to 3600 psi and lower and the YH for anything higher or to top off my 30 minute scba to 3500 for tethering. I don't tether often.
I also have a few other compressors that I don't use or in need of some level of repairs.

Racer88 · Jul 21, 2025

Perle said:
23 bucks for a black bolt. ?

Haha... New to the gun (accessory) world, are ya?

Dead-On · Jul 21, 2025

So when visiting the classified section I notice that around 80% of the ads are for accesories and not an actual airgun, even though an airgun name is in the ad. Seems cluttered and like I am sifting through a thrift store for an actual thing.

Would it make more sense to have two classified categories? One for actual guns and one for actual accessories? It seems like the big ticket items are being pushed out of view fairly quickly for the same accessory items repeatedly being listed.

Imagine all the airguns in one list... that would be magnificent! I would much rather walk down the accesory asile for accessories and the airgun asile for airguns rather than sift through one big pile.

What say you?

Coinwa · Jul 21, 2025

SWFA’s standard SS series utilizes rear parallax adjustment (where the power ring would be on a variable power scope).

There is no better scope for the $$$ than the SS series.

A.G.R · Jul 21, 2025

Usually there is a small dovetail that is milled onnthe barrel that the front assembly locks onto. Some also had spline pressed fit with it. They just slide on tightly.
The top block is a cast block and can wear from use or hairline crack or the dovetail can get loose
inspect it closely in the gaps for any cracks.
Tap it off with a block of wood if it’s moving already. More likely it will need to be retainer applied innthe dovetails and front area. Loc Tite. 680 works best.

As for grubb Screws. The top holes are for mounting the sight on top.

I have pics I can get later

Trucker3573 · Jul 21, 2025

Normkel said:
For the purpose of transport to the range and filling one's own guns, would you prefer the CS-4 over the CS-3? I have a 3 and a Nuong (Tuxing clone) as backup. I had a New Warrior (Yong Heng compressor in a more advanced arrangement), but much to heavy to make for convenient transport. I'm trying to decide on whether to change compressors.

For comparison: left to right, New Warrior, CS-3, Nuong.

View attachment 579684

If I were just filling guns only I would go with the cs3. Just about any part is readily available to rebuild/replace. Not really so on the cs4. Cs3 is super easy to work on as well.

Ada · Jul 21, 2025

Tricky-Dicky said:
Not sure if I trust this, but I downloaded a random phone DB app and without a pellet I got 77db and with I got 79 DB this is a sub 12 Epoch and the phone was 4" from the end of the barrel/shroud.

Just tried another app which I think is more realistic, and got 96db with no pellet and 99db with!

So I think the app is the deciding factor, Unless you have a properly calibrated DB meter you're just going to get a rough idea, that's all.

You are certainly right about the apps.
I don't have an expensive dB meter ... I think I got it for 50 bucks or something.
But you can certainly do an apples to apples comparison with one.
Now as far as your sub 12 epoch ,now that should be way quieter than the 47 odd fpe that my .22 is pushing.
Also I see your point on the metallic clang being the hammer mechanism ( for lack of a better term) and it probably is true in your case with a sub 12 gun, however I don't think that is the case in mine.
I will try and make videos and sound recordings later in the week, in an effort to better portray what I am hearing.

wimpanzee · Jul 21, 2025

i have a Leupold 1.5-4x that i put on my gk1 in carbine mode. It is super clear, super light, and perfect for the 10-50 yards i use that gun. It is parallax to 100yards, but its so low a mag it doens't affect it much. My understanding is that its adjustable somehow with the objective lens, but its been a non-issue for me so i haven't bothered.

L.Leon · Jul 21, 2025

Chukar60 said:
I was considering one for my
atomic XR. Ended up putting a US Optic TS-12 on instead. Did not like the reticle choices on the LPVO’s i looked at

My Atomic XR, West Hunter 3-12x42 FFP IR SF…. fits just right and doesn’t bulk up the little carbine…

Cantona256 · Jul 21, 2025

This is by far my most gruesome kill with an air rifle… got him in the back of the head from 30-35y… I was on a little hill slightly above him so the slug when in and obviously the expansion was excellent on the way out…

Barra 250z .25cal
32gr franco slug at 980fps

Dstrac · Jul 21, 2025

uncdav said:
I understand my shot curve, and the pressure window I need to maintain. But as is always the case I want more! So the question is....Is there anyway to add a regulator to an unregulated tube type PCP?

Are you shooting from a bench? If so you can run a tank tethered with an inline regulator.

IndiAirgun · Jul 21, 2025

This listing has been renewed

Latest activity

Latest activity

Filter