I have two I bought specifically for 10 meter competition, a 2078A and an Anschutz 2002. I started with the 2078A and did reasonably...

They made so many versions…these two were my favorites…they were a excellent gun but like most german guns they made …they had close...

Valve rod/housing and plenum orings changed I think due to 15 warm up shots issue. Other than that I’m not aware of anything. Love mine...

The real key to shooting well offhand, is to do it a lot. Nobody is a great offhand shooter at first. Get some guidance on form...

I don’t know what caliber you are shooting but, let’s say you’re using a .22, so the 145 is probably too high. I’d start at 120 on the...

Ive owned the 300 for around 5 years the 45 since the mid 80s. I’m talking informal. I shoot strictly for fun and I’m not going into to...

Sorry, not really answering your question, but is this only available on the Krait X? I have a Krait standard and you got me thinking if...

So it looks like cleaning the barrel was what I needed. I got the patchworm kit and ran a couple pre soaked patches through and then...

What caliber?

I would start with more reg 130-140 bar and max hammer wheel also has the allen adjustment on the older Impacts. We used to port the...

Did you verify they have .350” OD plugs with .22 and .30 shanks??? I seriously doubt they do.

Man I had one ordered with AOA for like 4 months until recently and cancelled it cause I made other guns sluggers… Looking forward to...

You’re the man… for whatever reason I didn’t realize gen 1…

Oh okay yeah it’s there and all the way out, I turned clockwise

So one should never remove all air from the gun? If a regulator needs to be reduced, is it better to just degas the chamber that it is...

This listing has been renewed

Nope, haven’t seen any butt stocks for it but it appears to have the notches to accept one. Maybe one from a real P08 might fit? Wish...

The screw holding the indicator for the hammer setting in place. There’s a screw in there that holds it and screws into the actual...

It's a first gen impact and .30 cal. It definitely needs more hammer to go above what he's already getting.

I also would like to put 10 pellets through a single hole at 50 yards! You'll be the first to know, trust me. 😁

I'm interested Yes please, report your results @Zeke G. Edward

I believe GX recommends the CS4 up to 6.8 liter and the CS5 above that. There is a one and a two cylinder CS5. It would be nice to...

I have 2 (1.6L (non-acecare) and 4.7L acecare) tanks and they both have the valve in the first option (in the image you posted, which...