Although I am not shooting anything as heavy as you, I have been testing NSA along with H&N slugs with good results and at a much lower...

As a pumper guy, the reason they are still relevant is their compact size and low weight for hunting when compared to spring guns or...

Im not sure, but was cocking feel harder with those jts? They might be litlle harder lead then jsb are.

Is one preferred over the other? Aside from a little much speed it's shooting great

Are you wanting to stay at the same length, go longer, or maybe shorter? If you are staying at the same length and already have a...

YEs thats what I said too the mating may not be a good one with harder valve material. It has to be perfect. A lighter exhaust valve...

On another note, I have a U2 .25 600mm and that thing doesn't care what angle it's at when cocking. I experimented to see if I could...

You can try different springs or adjust the regulator down a little bit.

It's been a while since I was really involved in the Daystate barrel project so I can only offer some info for questions to ask the...

@adknives Was it accurate and how good it feels now? I did also order Krait .22 standard at sunday. Pack is waitting for filling port...

Either you or Tim needs to go inside and see what is going on. He does use a lighter spring is my understanding. I think he does this as...

It's down pouring in west palm

As far as cost go nothing is set yet or will be for a while. The goal is to keep it $800 or less. When it comes to the common...

yes it does and they work ,you can get as technical as you would like, I've been to there shop , i have seen the 1000s of o rings Etc...

Have you contacted Pard? That would be the first thing to do. That is not normal regardless of device.

I noticed you said you wanted to control the flow better. That wont help with that unless you meant you needed a better gauge setup. I...

Hades 15g were most prone to jam for me but everything would jam depending on the degree of inclination including Dead Center 16&18, JSB...

One thing that causes these guns to leak, Steroid or not, is corrosion in the valve. Which can cause nicks to the seat and poppet or...

I have 2 of Joe's valves/tanks that are probably 13+ years old now and they are still working like the day I bought them. I ended up...

Here’s the vid of when aoa was there last year

Thanks, If its not cocked the Steroids hammer would hold the calve open. My problem is getting the valve to close after it's cocked. Did...

That's the pellet I am using dead center 18.1

I am looking at what ballhead mount to get for my G3 trigger stick. What brands do y'all recommend? This is top of my list right now...

Scout..