Looking to sell my HW50S in great condition. I installed a TBT tuning kit, which made it much quieter. Have a .177 detuned for my backyard and don't use this one.

No box, will ship in a padded box or plano case

300 split the shipping

Pictures upon request

Last set up for 910fps 60 shots w/18.13 by AZ. Can literally stack ragged 50 yards. 
Roughly 3 months ago I contacted Martin Rutherford about a CF bottle, V block quick fill, stock alteration, reseal, reg rebuild. I could send it to him if buyer desires those mods. They’d run $525.

Great hunter for a lefty and excellent bench rifle. I’m simply selling everything except a springer or two. One 12 shot mag, trued 1” rings, AZ fill adapter, original and oversized SS bolt handle, extra bottle valve. 
I’m looking for $1350 shipped in a case & boxed anywhere legal. I could send it directly to Tennessee & Martin for $1300.00.

Destination is buyers choice. PayPal F&F only. I’ve got nothing but 100% positive over past 15 years. Adult signature required be it USPO, FedEx, UPS.

This is #45 of first 50 Made in USA.

No tire kickers, haggling, etc. Just ask for my PayPal info & please let me know where you want it sent. To buyer or tuner for updated service. RAW came to USA in what? 2010? 2011? IDK but it should be serviced. I only fill to 2800 psi max as I have a big compressor. Rifle holds air for 7 days+- as of now. Reg most likely in need of new Bellville washers. 

Just finished a transaction with Matt that went without a hitch. Easy to deal with !

I have a new in package 1" FX No Limit Rings for 11mm groove that I am looking to trade for the same rings but for a Weaver rails

Hey All,

Looking for a decent lightweight tripod to shoot off of on the farm. Arca Swiss, Picatinny, and claw are all being considered.

Thank you.

Dave

Great communication,packaged well and shipped quickly.

Up for sale, my .22 Edgun Lelya 2.0.

comes with a shortened syntactic R5M stock with picatinny rail for bench shooting and the original walnut stock.

comes with BAT moderator and a 3D printer picatinny rail with flashlight.

the coating on the BAT is very thin as it came to me new and is rubbed of at some spots

the walnut stock has some minor marks on it but nothing serious.

gun is 100% sealed and hold its air and is shooting very accurately. 


located in the Netherlands but will ship worldwide where legal! 


price without shipping is $1400USD 

with 

It’s the knurled version. 33 shipped 

Looking for a rear sight for Mod 5 Diana pistol. I have the base, but need all the adjustment pieces and sight blade.

ATN BinoX-HD 4-16 New $265 Shipped. New in box with all accessories. Shipping to lower 48 payment via PayPal Friends and Family. PM me if interested.

 Excellent seller.Merchandise packed nicely and shipped on time. A pleasure doing business. 

From our second batch of magazines, we have a few remaining 12-shot and 15-shot Brocock magazines. These fit the traditional NON-"Flip" rifles. (We will post the 'flip' models hopefully by the end next week)





These work well, cycle smoothly and perform as expected.
These are in .22 caliber 
Costs per mag would be $25 for the 12-shot and $28 for the 15 shot respectively.

Payment via PP FF or Venmo. Magazines will be shipped next business day.

You are welcome to PM if you have any questions.

Thanks for looking!
-Jimmy

I have 2 guns I’d like to trade for 1 high end .22 PCP. Both are in great condition. I’d value the total at 2K and I thinks that’s a fair price. Looking at FX mainly. Please text any interest or questions to 509-993-9105. 

FIRST:

I have a Custom .30 Kalibrgun Cricket for sale. Comes with 1 mag and extra orings. Fill probe included. I have too many airguns and this one needs to go. Picture is from the guy I bought it from. I can text or send you via pm more pictures if you need. Gun shoots great and is very accurate. Average velocity is 870 with 44 gr JSB for a total of 32 shots with an ES of 8 FPS. The cocking lever has been modified to resemble a biathlon style lever. Great for left handed shooters.



SECOND:

I have a very good condition, extremely accurate Ataman M2R .22 Type 2 Bullpup for sale. Comes with 1 mag and the DonnyFL Moderator adapter.

I have a tethering setup for sale, used with my texan I no longer have. This regulator is high quality, if interested in the part numbers and info I can send over via pm. New the reg itself is north of $1000 dollars less the gauges, it has 2 brand new wika gauges on it and comes with a custom built 6000 psi bleed valve for between the reg and rifle.

I have no use for this I am asking $375.00 shipped CONUS paypal FF or add fees, I have flawless feedback here. 

I will also trade for a range finder and cash, range finder and .25 cal 33.95 grain pellets or table top tripod...

Included is, reg, bleed valve, and carry case. 

View attachment IMG_20220211_195035_318.1644795143.1649961555.jpgView attachment IMG_20220211_195035_360.1644795143.1649961555.jpg

3-12x40 SFP: AMX IR reticle

Brand New In Box





Retails for $420 + tax, asking for $360 shipped to CONUS.

DM me if interested

-Michael

30.00 each Shipped PayPal friends and family

PY-A-3882

AirForce 11mm-to-Weaver Adapter

I bought for a talon SS that I sold

I hate to do this, but funds are quickly needed, and I have to let go of most of my collection. This is a mk2 impact .30 with 700mm barrel and slug A liner with epoxied carbon fiber sleeve. It was gone through by Augie (bigragu) and all seals were replaced, the reg was rebuilt, and all fasteners were replaced with stainless. Some are torx to replace the Allen’s in places where they are often loosened or tightened for service or barrel removal. I then had the new 720pp kit from the M3 installed on it along with the slug power kit, a custom made brass hammer weight, and 16 position M3 power wheel. The barrel has a new dual transfer port and the barrel was thoroughly cleaned and polished. The Burt stock is a custom 3D printed version with a built in monopod, and it has the saber extended arca rail and smw engineering barrel clamp to help with ridgidity. 
the pellet probe (I shoot mainly pellets and hybrid slugs) is installed in a Kraford and Lypt probe holder, and the cocking arm has a custom handle installed. 
if you know Augie, you know what he’s capable of, and this gun shoots 44 grain jsbs at 960fps, and they’re basically hole in hole at 45yds. I haven’t gone farther than that, so I couldn’t tell you any more. The reg holds solid at pressure, and deviation between shots would make you think it has dual Regs!

now for the tough part. I’m asking $1800 for this rifle,and it will come with 2 Orion mags, 1 factory “small” mag, Donny fl ronin, hard case, and any extras that Augie sent it back with. Please know that a lot of love and attention went into this rifle, but I’m not the original owner, and while Augieworks magic on the internals, there are small blemishes on the outside that show it’s age. It in no way takes away from the operation of the rifle, but if you want a prestine looking impact, this isn’t for you. 


please contact me through messenger if you have any more questions, or want more pics. I’m 100% transparent, and I’m not the kind that will get annoyed with offers (how can I say no if you don’t offer?). 


thanks for looking,



Andy. 

Sales Rules:

• I am only accepting PayPal for this sale.
• CONUS shipping is included in the asking price via UPS with tracking.
• I will go based on PM timestamp. 
• Trades considered:
  • Edgun Leshiy Classic in .177 or .22 / 250mm + cash
  • Edgun Lelya
  • Ataman AP16 .22 pistol + cash
  • Other cool PCP pistol (HW44, Ranchero, 10m pistol, LP50 Compact, etc) + cash

I am selling my 1 month old Cricket 2 Tactical 45 in .22 caliber. I really wish I could keep this one as it's a very accurate shooter. I've been getting 1/4" groups @ 40 yards in calm conditions with JSB 18s @ 920 fps. This is the power level it's currently set for. The reg was reduced a tiny bit to bring the max fpe down to ~36 fpe so the tune was more in line with 18gr pellets. Power can be easily increased up to 45 fpe and the 25gr Redesigns are excellent at that power - only need to increase reg about 30 degrees and flip the air tube around for more plenum space. 

As it is setup it can push the 18 gr pellets up to around 950 fps. Shot count is excellent with easily 80-100 shots in current config.

A few small additions to mention:

• Sekhmet digital gauge installed and includes original box, charging cable and accessories. 
• 3 magazines are included. All tested to cycle smoothly.
• Rear shroud was drilled for 8 small vent holes (can be seen in last picture) and dense foam placed in rear 2-3 inches of shroud. This is excellent at reducing perceived sound forward of the muzzle. 
• There is one missing screw on the side panel. Can be seen in pic with Sekhmet gauge. The screw stripped when trying to remove for first time - I do not have a replacement.

Scope and mount are not included.

Price: $1400 shipped

If you have a nice HW30s please let me know. I’m looking to possibly buy one for my daughter. Thanks 

Looking for a high capacity FX Impact .25 magazine and a .30 too. I can PayPal Venmo or have trade stuff too. Thank you all.



Keahi Lum Ho

FX No Limit Dovetail 30mm rings. Great condition. Sold the rifle I was going to use them on. $60 or trade for 3 tins of .25 JSB pellets. 33.95 gr preferred. Text 509-993-9105

$125 OBO. Buyer pays shipping (CONUS only). 177 caliber. Other than wear spot from using pneumatic lever, very good condition. Serial number traced to 2006. One of the newer ones. Last year 747’s made was 2010. If interested text 612-280-4453 Paypal or check accepted.

Looking for a Maccari muzzle brake for my R9!

.630 inside diameter....long or short!

Message me with pics and asking price please!

Thanks James from Michigan

Huggett 700mm shroud for FX impact had to cut a little off the back so I would fit my M3 impact. It’s a little to long for long walks in the wood but fine for bench rest shooting. Asking 200.00 shipped PayPal friends and family 

Looking to buy some avenger factory barrel bands id also be interested in some of the spacers that go over the barrel to center it in the shroud.