I'm in the market for the above scope. thanks.
JPW

Looking to buy H&N .22 27 grain slugs (.217)
Lmk what you have before I place an order with a retailer.

I have a .177 leshiy 2 mag that I am not using and would like it to go to someone that will use it i stead of sitting in a drawer. $70TYD has some wear on the front bit functions as it should.

For sale is a .35cal GMI Swage dies. In very very good condition!! Only used to make about 100 slugs because soon after receiving it I received my new NOE moulds in .357 and also my Corbin Swage dies in .357 so there was little need for me to use it. I used it mainly to do videos and instructionals for future GMI Swage users.
This is an excellent item to own!!! This allows you to be self-sufficient and to also possibly have a "side hustle" selling slugs. I suggested these dies to Andrew owner of KC Slugs and he has had awesome reviews and has become a good friend of mine as a result.
Currently you cannot buy any of the dies from GMI because I believe the company is in transition of some sorts and it isn't clear when they will begin selling them again. Corbin dies are currently on a 18month to damn near two year waiting list .

Sooo, here you go, a .35 cal die in two weights 91gr & 78gr slightly cup based (I say slightly because depending on how you press they can be totally flat). Once you get used to how to use them there is SOME slight adjustment you can do to get lighter weights, ive made 68gr'rs with it.
These perform AWAZINGLY!!! I've used them in several platforms under a few different tunes and have achieved excellent results. I've tested them in my Bulldog, my Texan SS, Edgun leshiy Classic (yeah my Leshiy), AEA Max, Hatsan Carnivore (they were so so outta this gun, but it needed to be tuned so I blame the gun), and my Ataman 357, all shot them very well.
Ok time for the brass tax! I'm asking $600 for the die regular price with the setup I have would cost you around $800. The reason I cutting the price is because I have the whole other dies that belong to the set that I'm gonna sell also so I figure I can make up the cost to me later. Just as a informational I'm gonna also let go of a .25cal, and a .22cal die also. If you want those too get at me thru PM and I'll tell you about them too. I'm looking for a new gun so I'm willing to trade them all for the right gun (DON'T EVEN COME AT ME WITH A AEA GUN as a trade unless it does $40 favors ). I know all together they would cost close to $2k so if the gun you may wanna trade is around $1400 and up in value I will strong consider it. I would love a M3 Impact or a Mk2 or M3 Impact in .35. I would even consider another Edgun L2 (I am a big Edgun fanboy!) or a Huben in .25cal

AGN'ers!
I have a .22 Slug Liner for Sale. It has paint markings ID, which can easily be removed. In great condition without issue. Price includes shipping within the CONUS only.
If outside CONUS, extra cost will need to be determined. First "I'll take it." via time stamp is the new owner.
PayPal is the preferred payment method:




.22 Cal SLUG "A" Liner 600mm $80

Looking to buy a TM 1000 with a right-handed, dark colored stock and with an adjustable cheek pad(field target mode)l. Wood or laminate is fine. PM me. Thanks.

.

I have a titanium snakeskin/battle worn trigger made by Lee dean agate up for sale. $100 obo shipped.

Thanks for looking

James

5 sealed tins of baracuda hunter extreme and one almost full tin

3 sealed tins of field target trophy

Not looking to separate

Will be shipped usps priority mail

Will be packed in PA tin foams

$80 shipped CONUS only

PP FF or pay fees

I'm currently looking to buy a monopod buttstock, adjustable cheek rest, and a bag rider for my M3. I'm also looking for a carbon fiber bottle with the valve and hose. My limit is $300 for the bottle, and as much as $100 for the buttstock, but I'd prefer a cheaper option. I don't want to spend much more than 45 each on the bag Rider and cheek rest. I would pay via PayPal

Won it in a raffle at RMAC 2021. only open the box never mounted. asking $450.00 shipped zelle, Paypal FF, or Paypal regular + 3.1% conus
i can send more pics upon request.

i got a very good shape uargan gen 1 25 cal has derrick wall custom adapter to run any m18x1.5 tanks has carbon shroude and new 3.6 tank comes with or with out donnly fl tatsu just testing water on this rifle comes with 2 mags and fill probe i take ldc and tank and drop prise to 1000$ shiped

WTS My AEA Assassin .22 , Carbon fiber shroud and moderator . 350 bar fill shoots around six mags 12 rounds per mag , 450cc carbon fiber tank , shooting 18g pellets at around 1000FPS , comes with three mags . Asking $725 .

I will also throw In AEA Sparrow .22 ...Both guns look and shoot like new . Scopes not Included . Pay pal friends and family , I will go 50 50 on shipping . My email [email protected] ,

I have to many guns , some have to go .

For sale is an excellent condition MK3 impact, 700 mm, .30 cal. with:

Titan 5-25x56 scope
Donny FL moderator
Swiss Arca rail
Custom barrel band
No limit rings
Carbon barrel stiffener sleeve
Power block kit (not installed)
almost 2 full boxes of fx slugs
1 tin of pellets
Factory case
Box and goodies for scope

$3000. PP F&F TYD.

OR, you can pay the fees for PP and we can do it that way.

Looking to buy one of these cases that the impact compacts come in for my Taipan Shorty. It is a perfectly sized case for it.

I have a pretty nice uragan 30 cal with huma reg.. I like my maverick 30cal better so I'm wondering if anyone is interested in trading from a raw 25cal maybe 22cal.. let me know thanksView attachment 274849

Impact M3 Sniper 30cal 700mm barrel. This is a unbranded power Block. Purchased from Talon tunes in March.Has everything besides tension barrel kit.
Has Carbon sleeve, Fat Boy moderator, slug Power kit, huma pin probe, fx duel tranfer port, Saber Tactical but pad, Saber tactical adjustable cheak riser, Saber tactical arca swiss 2 rail, Saber tactical Trs Rail.
Gun shoots absolutely Impecable.. currently tuned to shoot 59g Zan slugs at about 970. It still has there stock factory superior liner. I do have a superior Heavy for it but it's not installed as I had no need to change it as my 59g slugs stacked on top of eachother at 50yards-75yards and made moa groups at 100+yards . Depending on wind,how much coffee or Budwiezer I drank lol I could shoot better or worse.
But I bought and built it for hunting. But now I'm afraid to scratch the dam thing with so much invested. So hear is the deal.
$2,600 to me. Shipping with cost about 70 bucks. So here is the deal of a lifetime as the gun cost $2200, and there is well over 1k in extras .
So $2,600 with everything + all original parts/pieces. (No scope,rings or bipod )
Or 1,800 factory equipment( slug kit will stay installed.
I'd be will to do a partial trade for something accurate that can drop a deer in its tracks. If you want more pictures or information call or text me at 413-834-1925. Please do not waist my time or your own. Serious Inquiring people only. Thank you.

Need JSB King Heavy MK2 | 33.95 gr. | 300pcs as many as possible

These sell for $399 on Amazon. I only opened this and topped off the air on one gun, before packing it back into the original box (for a demo video). Brand new compressor. $349 free shipping. Paypal OK, You can call or text me at 360-844-0962 or PM me here or email me at [email protected] Thanks -Nate

Edit #4: Lowering the price: $965 TYD.

Edit #3: No longer available sealed in cellophane. I opened it to make sure it's ok, and everything is there, and to take pictures (for the ad on Sniper's Hide). Pics included here too (hopefully this is not against policy). I can supply brand spanking new pictures if required. There is a very small blemish, circled in red in one of the pics. This scope has NEVER been mounted.

Edit #2: I couldn't wait any longer to open the cellophane on the box to inspect the scope, and verify all pieces are there. I will be listing this on Sniper's Hide Forum at some point soon (correction - it's listed there). I will relist here, with new pictures, once this thread is locked. /Edit #2

For Sale - Brand new in box - Burris XTR III 5.5-30x56 scope, non-illuminated SCR MIL reticle #201210. $1000 US, plus half shipping. Not interested in trades. Payment by Paypal goods and services is preferred. However, I will also accept a US postal money order, or a check, but these will have to clear before I ship.

Purchased one of these new. I had an issue with some cosmetic damage from shipping. Burris allowed me to exchange it for a brand new replacement (pictured below, still sealed in factory cellophane wrap). As it turns out, the deal fell through on the rifle I intended this scope for, and I no longer have a need for it.

Made in USA (with Japanese glass). Has transferable "forever" warranty. No receipt required. Should come with sunshade, flip covers, and optional uncapped windage knob.

One condition of sale: I would prefer to open the cellophane (and box) to make sure that everything that was supposed to come with it is in the box BEFORE I ship, but AFTER I receive payment. I will do this with the buyer with video chat, or something similar....just so we both know for sure that everything is there.

This is listed on AGN only. If you see it anywhere else, it's a scam. Please PM me here with any questions. If you prefer, I will provide you with my cell phone number if you request it. I do have email notification set up for when I receive PM's (hopefully it's working).

Unfortunately, I do not have much feedback here (as I have not bought anything on here, and I've only sold a few items: a Gamo rifle, a barrel band, an air stripper, and some scope covers). For the sake of establishing some credibility….the screen name I use on here (for 2.5+ years now) is my screen name on GTA, The AirGun Guild, Dootalk, and ebay.

Thanks for the space, AGN.

Edit: I didn't notice it when I unpacked it yesterday. The box took a hit during shipping (see last image below). All the more reason I'd like to open it before shipping to its new owner.

This is one of the first few chicken targets I made…it may have been the first. This target is designed to be shot at 100 yards. The chicken's body is almost exactly 1 MOA. All 4 panels and the chicken spin independently, so you can tell where you hit when you miss the chicken. This target is able to handle .357 and up with 100% no damage. I won't be making anymore of these because they take about 6 hours + $50 in steel.

It's 1/4 inch steel plate. The chicken is actualy reinforced from head to toe over 1 inch thick so his head and tail will never bend.

Asking $199 +free shipping. This is the actual target pictured here (yellow one). Made, painted, and ready to ship.

Paypal OK, or Postal Money Order You can call or text me at 360-844-0962 or email me at [email protected] or PM me here. Thanks! -Nate

I am selling my excellent condition FX Impact MKII .25 cal, 700mm sniper with power plenum. It was completely re-sealed and tuned by Ken Hicks at SPAW last year. Receipt available. Huma regulator and Wika gauges. 28 round magazine with Orion insert and speed loader included. STOCK gun with MKII cocking block, MKII buttpad, case, FX moderator and glued carbon fiber shroud tube (not the barrel sleeve) is $1450 shipped.
$1950 shipped in its current configuration with the Airmarksman Backbone rail, M3 cocking block, M3 buttpad, Saber Tactical bag rider and Saber Tactical picatinny extension and carbon fiber barrel sleeve.
At this time I will sell it only stock or with everything. If it sells stock I will list the extras separately. Scope and rings not included.
Please pm if interested or have any questions. PayPal or Venmo accepted. Thanks for looking.

For sale is one FX Crown Walnut stock. I took several pic so you can see its in perfect condition.
Its a very light stock.
Price is $275 shipped in a insured via PP FF or MO.
TRADES: FX 580cc tank or Omega version
Thanks,
Jason
PM or text at 865-776-3850

For sale, three .22 RAW mags purchased with a .22 HM1000X chassis - like new. These are left hand insert and measure 16.8 mm in width.

$150 shipped within continental US. PayPal F&F only or add PayPal 3% fee.

I bought this gun from Charlie at Georgia Airguns several years ago. It’s power tuned with the added plenum and gets 54 shots on the reg with a 3600 fill. With hammer spring maxed out it will push a 34 grain around 930. Holds air forever. This gun has never had any moisture in it as I go to great lengths to insure proper filtration. I never thought I’d let this one go but I just don’t shoot it anymore and it just sits in the safe.

Included is the fill probe with a male foster fitting, two mags, spare Oring kit and I’ll throw in a tin of King Heavys. Scope not included.

It will be shipped in the original box with the test target from Charlie. Price is $1100 to me, PayPal F and F or you pay the fee. I’ll pay shipping to con US only. 



i had a good group going and the 9th shot hit high and to the left, 8 made a ragged hole and 3 Landed to the right. That little ding in the pic is the only mark on it.

Thanks for looking, Mike