Looking for a Discovery 3x12-44 scope. Gen 1, with the orange holes in the turrets . Thanks!

Hello,

Selling a Benjamin Marauder pistol. It has been fully gone through, very accurate.

25 shots at 18.2fpe

Shoots JSB Hades amazingly well, and has taken a number of rabbit, and squirrels.

What's been done?

Crocoran Carbine Stock
Marmot Militia Barrel
TKO Moderator
Light Weight hammer
Valve porting
Trigger work
Custom springs (Hammer and Valve)
Huma Regulator installed
Some secret mods I don't share online
Tuned for reasonable power

This was not a cheap build, lots of exceptionally high quality work and parts went into the build.

Barrel, regulator, hammer, TKO Mod, and stock add up to over $800 Not to mention the cost of the pistol itself of around $400. Plus all the tune work, valve porting, etc.

I'm selling the gun for $1000 obo, or with the Bug buster w/ rings for $1100.

Will consider trade for Field Target equipment/ rifles. Or other high end airguns/ stuff.

Contact me:
camsprecisionairguns(@)gmail.com

Or

(Nine16) Five31-2349

I’m looking to sell these 10 unopened tins for a total of $185 shipped in the continental US. Current price on Pyramid for ten tins (paying for eight and getting two free) is $231.92, so save yourself 20% and put mine to use!

Payment via USPS MO, personal check (must wait for it to clear), Zelle, or discreet PayPal friends/fam (or add 3.5% for goods). No trades. Thanks!

Diana 48/52 (.177) with original box.

This is the 52 version with upgraded stock.

In very good condition, works as it should with no issues.
I have the original rear sight just didn't put it back on for picture; I had a scope on it for a long time.

Price includes shipping.

$285

i have a full tin of the AEA .30 66.2gr and a 65count tin of the polymags .30 44.75gr pellets
to trade for......
1 full tin of jsb or FX .22 18.1gr pellets
each pay own shipping inside U.S.A.
my pellets will be shipped to you like PA does it !!
thanks for look'n.......

Four old style Daystate 22 Cal. Magazines for sale. $295 shipped to you in the CONUS. Paypal F&F or add 4.5%.

i got a brand new ma2 in 22 cal no ldc on it has a ergo grip ruber and a utg rear stock i just shot it to site in scope 4 pellets down it shoots good

Just back into my wood shop after knee replacement 7 weeks ago. This is the first Air Rifle Tote I've made post surgery.

Wood is insanely figured Ambrosia Maple with red cedar accent along bottom and up both ends. This tote will hold two rifles or one rifle and shooting sticks. Holding "u"s are leather lined to protect your equipment. Poly 1/2" rope for handles. These wood choices are for aesthetics and light carry. Dimensions are 22" long, 8" tall x 9" wide. Very stable. The rifle "U"s are 63 MM (2.5") in diameter for standard 480 bottle. Unit weighs 9 pounds (example: if made of oak it would weigh 14 pounds).

No metal is in this build. Joints are dowel and waterproof wood glue.

$150 + $20 for shipping.

Huben gauge works perfect. $22.00 SHIPPED

***REDUCED***Aluminum Huben pistol 1913 picatinny butt stock adapter, I had a machinist make this for me before anyone had a all aluminum one available. Replaces factory block Works great, but I now have a combination (picatinny) Sight/Butt stock adapter installed.

$20.00 SHIPPED

This is a completely unused AirMarksman 700cc bottle with NO valve. I have all of the original packaging. I originally bought the bottle for a project that I never ended up venturing through, therefore the bottle has just been sitting around, unused.

I am selling for $260 shipped to you (conus) using PayPal F&F.

Let me know if you have any questions! Thanks!

-Adam

Wika Analog Gauge 315 Bar -Black​

Wika 30 MM (1 inch) with 1/8 BSPP (G1/8) threads. Fits EDgun, FX impact, Kalibrgun, and many others. $40 shipped. new never used

I'm looking for an original RAW .22cal HM1000x Single Shot Tray. Please let me know if you have one that you would be willing to sell, its condition, and what you want for it.

Thank you!

Just converted my impact to .35 and looking for some slugs to try. I’d love to find someone with a variety they are willing to sell me so I can try different options.

Particularly interested in NSA and FX Hybrids.

Up for sale is a fantastic custom Artemis PP 700 SA



I have a .22 caliber Artemis PP 700 SA in .22 that I have customized.





Modifications:

• Custom hand made a Peruvian walnut Burrell target grip.
• Polished trigger internals
• Carbon wrapped tank
• Threaded moderator adapter
• Currently setting is de-tuned to shoot slightly over 500fps for 10meter target shooting.
• TACFUN 3-9x42 Long Eye Relief Scope
• Custom 3D printed bottle grip with Picatinny rail for bipod.

What’s included:

• Artemis pp700sa
• Original stock grip
• Custom walnut target grip
• Scope
• Scope rings
• Threaded moderator adaptor

So creating the target grip was not an easy process so there are some imperfections in the grip.

Over all I was happy with the end result taking into account how hard it was to make. I cannot guarantee that it will fit your hands as I have small ish hands that is why I have included the original grip.

This gun is easily tunable and the hammer spring is backed most of the way out to get this lower FPS.

To tune, the gun back to high power all that is needed is to tighten up the hammer spring.



Selling for $400 with Free Shipping



PayPal only

Up for sale is a Fantastic Custom Umarex Notos .22 PCP Build!

Modicications:

.036 or 360cc Carbon bottle conversion

Dual gauge, regulator and bottle pressure block

Custom air block ported to 4mm

Polished Trigger, and trigger internals.

Carbon wrapped barrel shroud

Carbon wrapped butt stock receiver tube

Custom blacked out gauge covers.



What’s included:

Gun with listed modifications.

2 stock magazines.

1 maple products 15 shot magazine

Basic folding bipod.

Monstrum Hornet 4-16x50 FFP Rifle Scope. (MOA reticle)

Monstrum one piece scope rings with integrated bubble level.

(**This Notos is the updated version which includes a degassing screw. **)


Gun has been choreographed to shoot JSB Match Exact 14.3g pellets at around 820fps with a standard deviation of 3. 20.94fpe.

(results may vary slightly, depending on regulator settings and temperature)

$700 with Free shipping (USA only)

This is 100% New in Box.has a total of 3 plastic clips.
$40 + shipping. Call 520-912-8651
Ok. So 1 guy calls , and says what model , and I forgot to put M4.
Then another guys say's post pics.
Then another guy say's you have to keep 2 pumps in it , but I knew that.
I just did not do it because it was new.
Thanks guys: Sorry for the confusion.
Model : M4 .177
Tested it with a few pumps it fired great. Still not a single pellet down it.
Put 2 pumps in it.
Posted the pic's.

Anschutz rear aperture sight.
Works as it should; no issues.
In very good condition.

Came off my competition air rifle.

Price includes shipping.

$175

All parts new take offs for custom build

Full stock and grip/trigger housing
Full airtube with regulator
Full barrel and shroud

135.00 shipped

My feedback is solid buy with confidence

Standard power Daystate Wolverine, Sapphire Edition, in .177. Pristine condition, no leaks or other issues, & very accurate with JSB 10.3 (have not tried other weights/brands). Comes with everything included in the original AOA package- one magazine, single shot tray, custom case, custom 0DB moderator matching the stock/shroud color. Scope/wheel/rings not included.

Happy to answer any questions you have about the rifle. If you buy, will give you a week after receiving to try it out- if you find anything I said about it to be untrue, send it back (in same condition & state of tune) & I'll return your money.

Asking $1700 shipped CONUS. PP F&F (or you can pay the fee for G&S), can discuss other payment options. Sorry, not interested in any trades at this time.

Handcrafted bespoke quality tank carrier for sale. Be the first to own one of only two existing specimens. Create envy among your shooting buddies.

It's custom fit to gently swaddle the 6.8 L bottle in the pictures (tank not included). I'll throw in some propriatary plastic adjuster straps & space age impact retardent if you have a bigger tank.

$350, Firm & pick-up only. But I will meet you halfway anywhere within the 906 area code.

I know what this thing is worth, but I want to keep it fair & friendly, so no bidding. Just going to sell it to the first serious buyer

Thanks for looking

Re-listing as my neighbor went with the .25 instead…..

Trades welcome.

Debated about selling this one, it is a shooter but really trying to narrow my focus as I dive deeper into the 100 yard bench rest world…

This is a .22 Daystate Redwolf HP with installed heliboard (original board included), latest electronics. Beautiful walnut stock with lower pic rail installed, one battery, charger and two Midwest Elite high capacity magazines.

The Monster Redesigns are all I have shot with this gun and are more accurate than me at 970-990 FPS. With the installed heliboard you have plenty of room for higher power for those wanting to try slugs and can truly be tuned by individual power level to really dial in the gun for what you want from it.

Gun as shown has the PRS buttstock installed (has the bag rider attachment also) which is available if desired.

Gun with stock butt pad - 1450 and we can split the shipping

With PRS buttstock and bag rider 1600 and we can split the shipping (original included as well).

Attached 0dB moderator available for 100.00 additional (tried MANY mods on this gun and this one is by far the most accurate).

Pricing OBO

Ships in original Daystate box with manual etc.

PayPal for pmt.

Scope, rings, bipod, 0dB not included

I have a new Hawke frontier scope still in the box. It is a 2.5-15x50 SF mil pro 10x #18421. It will not fit on my rifle. Will trade for a scope of equal value.

i am interested in the NOE .30 cal 68gr boat tail slug mold (with HP pin option)
300-68-FN-BI3 4 Cavity RG4 BT

a version with 2 cavities would also do.

since i am located in EU (finland), most likely overseas shipping is required.


thank you.

This scope is in excellent condition. Easy to mount and is super clear. $370 shipped obo.