Hey guys, my buddy and got this gun about a year ago and have forgotten about it while waiting for parts. It's held air since it's last use, it also shot well, but we haven't been able to find parts for it.

Come with 1 mag $525 shipped

NO LONGER AVAILABLE- DECIDED TO KEEP, THANKS FOR LOOKING

Hard for me to let this one go, but I’m being honest with myself in the solid fact that it truly never gets used to its full potential. The other day I asked myself how many rounds I’ve put thru it since acquiring it, and an honest guess would be about 15 whole mags worth of shots, so at around 255 shots(the 30 caliber mags on these are 17, all others 19). Most of those were times when my none pcp hobbyist friends came over and I’d let them entertain themselves by unloading 17 shots in less than 4 seconds in full auto. The final straw was me trying to load it the other day. I lost the feeling in my first three fingers from a 2021 cervical neck fusion, and I keep dropping pellets while trying to load this. Very frustrating.

I bought this beauty thru the classifieds, but it was brand new, unused, when the owner sold it to me. He unboxed it upon delivery just to post pics of it to sell, so I consider myself the true first user of this gun.

I recently set the tune at 860 fps from the 965 I had it at. If you’ve never tuned one of these it is the easiest platform to tune, just turn one knob CW or CCW while shooting thru a chronograph. The regulator has never been touched as reccomended by the factory. It’s never been out of my garage where it’s always been shot from. it’s truly been neglected by me just hardly using it. Other than the factory recall on the full auto toggle lever that AOA replaced, it’s been 100% flawless in function and leak free. It’s been kept at the just under the factory spec fill pressure setting of 250 bar in all the time I’ve owned it(230 bar is what I store all my unused PCP’s at, which is to allow for temp fluctuations)
I’ll post two links that are treads I started on this gun showing all I’ve done to it, and post up current pics by tomorrow. Current upgrades are a complete stainless fastener conversion. A DFL adapter so any 1/2-20 threaded moderator can be used, a secure method to make servicing the barrel off of the gun much easier when replacing, and a 3D fabricated custom adapter so a Saber Tactical rear monopod could be used for bench shooting.
I have the original o ring set from the factory along with a complete set enough to reseal the entire gun at least 25 times, and the K&L custom shoulder butt attachment that I never used and it’s still in its original box, an Ergo deluxe tactical grip with palm shelf.


All the factory pieces like the original hand grip, fasteners, etc, will be a part of this sale. It will ship in its original factory case and box from AOA. It will also come with the original owners manual and misc paperwork.
Disclosure- the 700cc bottle has decals on it, so I will be reinstalling the factory 500cc bottle back on for the sale.

The athlon scope and mount is not included in this sale. Asking price will be $1500, which covers shipping. I accept PayPal in F&F or G&S, in which the buyer would cover all the fees. The gun will not ship until I see the funds in my account. All standard stuff when buying in the AGN classifieds. No shipping overseas, only selling to folks in the CONUS.

As far as ammo, It shoots the 44.75 Haydes the best.

Here are my two treads on my initial set up of this platform-



Current pics to follow:

Pics are here- does not come with scope, scope mounts, 700cc bottle, the REKON ARCA adapter, or the STO Faux moderator wrapped in red vinyl. It will come with the factory mod and the DFL adapter so you can mount any 1/2-20 threaded mod.

Looking for a couple latest generation Sekhmet gauges.

Bought this used 20 years ago. Never used. Was mounted on a 10M rifle, but never used. Glass is clean. Focuses down to 5 yards! Includes stop pins that will mount on a 11mm dovetail and Uncle Mike's scope covers. No trades, third party, or international sales. Will ship in a USPS small flat rate box insured for $12.30 ($9.30 + $3.00) CONUS. Buyer pays shipping charges. Paypal FF/Venmo/Walmart2Walmart or PP G&S (+3.3%). Asking $275 + shipping.

I have for sale a brand new Athlon Cronos BTR G2 4.5-29x56 MOA. The scope is brand new still in the box. Decided to go a different way with a Leopold scope. Selling this for a great deal for somebody else to enjoy. Bought directly from Athlon.

$950 (No Trades)

Will ship UPS Ground fully insured signature requiredto lower 48.

Paypal FF or you pay GS fee of 5%. Will also take USPS money order if you want to do that.
thank you for checking out this post.

Interested in .177 barrel for Leshiy 2 and any silimar calibered accessories, magazines, etc

Thank you

For Sale FX Impact M3 Power Block 25 700/Sniper

$1300.00 Including Shipping
CONUS ONLY



The rifle has been well cared for and is in Excellent used condition.

I have only used filtered dry air from my compressor.



BIPOD IS NOT INCLUDED IN THE SALE .

Included in the sale are:

FX case.

The rifle has the Standard Superior Liner 1:24. The liner is almost new as I used a slug liner.

3 Orion The Iguana Hunter 25 shot magazines



Donny FL/FX moderator



Owners manual

Original plenum and block.

Complete O-ring Kit



The rifle holds air perfectly.









Please feel free to ask questions !

Paypal Only

Shipping CONUS ONLY

For Sale: Huben GK1 v3 .25 for $1100 + $20 Shipping. PayPal Friends & Family preferred. Will do goods and services but you will have to pay the additional fees.

Looking to sell my Huben GK1 v3 in .25 caliber. It will come with additional parts and factory OEM parts (Allen key, spare o ring, air probe, stock loading gate, stock adapter, and etc). Absolutely no issues. I believe I am the second owner as I purchased this from a fellow AGN member. Also comes with about 350 slugs from AVS. They are .254 42gr Flat bottom slugs.
NO SCOPE, NO SCOPE RINGS, NO MODERATOR but it does come with the dovetail to picatinny adapter. Does have cosmetic damage on the top rail from the adapter. See picture.

Upgrades:
GK1 Loading Gate from Ares Tactical (Metal)
GK1 1/2 x 20 UNF from Ares Tactical (Metal)
GK1 Stock Adapter from Buck-rail (Metal)
QD Takedown Adjustable Stock Adapter from Buck-rail from Buck-rail
AR Castle Nut from Buck-rail
Magpul MOE Mil-Spec Buttstock from Buck-rail
B3D CF tank hand guard

New all factory supplied asserys and paperwork. Fired a mag through it. To loud for where I live. .
.25 Cal. . Has up dated barrel shroud tensioner.

Notos tube, stock tube with regulator... needs gauge. light dings, marked up reg side end cap of which the sides were wrenched on for removal to adjust reg. $37.50 shipped













Stock notos barrel, has 1/2"-20unf adapter and spacer for clearing plenum. $37.50 shipped SOLD







Short hatsan at44 .177 barrel. Excellent shooting barrel, slug or pellet, incredibly accurate $37.50 shipped SOLD.


Make offer if interested in anything, nothing is set completely in stone.

I have two Hawke Vantage 3 x 9 x 40 A/O Mil-Dot Reticle SFP #14123 brand-new in the box from Hawke. I had two identical models that I returned to Hawke under warranty, and they gave me two brand-new scopes the other day. A picture of the Hawke inspection reports, and shipping box is attached. The Hawke resolution of the problem is near the bottom of the report, indicating they chose to replace the unit with a new unit. I will never use them because I have since traded up to Hawke Airmax.

Update: I sold one, still have one new one. I also have one that is like new with a couple hundred shots through it. Make me an offer.

$110 each, free shipping, add 4% for Paypal

02/04/2024 PRICE LOWERED.

3X IN .22, 1X .25

Hardly used, almost new.

Factory original / genuine. Same as these;

These have a yellow-ish front cover instead of grey. Like these;

Take all 4 for $160 $140 shipped
take 3x .22 for $140 $120 shipped
take 1x .25 for $40 $35 shipped

02/04/2025 PRICE LOWERED, STILL HAVE A COUPLE AVAILABLE.

Went a little overboard on these I guess...

Factory original FX 580CC carbon bottles. These retail for $350 (Ex Sales Tax);


4x, never used. No scratches, dents, pits or other damage.

take 1x bottle =$300 $275 shipped per bottle to lower 48, Paypal ff or + 3.5% Paypal fee

take 2x bottles = $275 $250 shipped per bottle to lower 48, Paypal ff or + 3.5% Paypal fee

take 3-4 x bottles= $250 $225 shipped per bottle to lower 48, Paypal ff or + 3.5% Paypal fee

(Shipping within Cont. USA)

Will be listing a 700mm .30 impact barrel kit as well.

Thanks for looking

No longer looking

ATTENTION! FOR A SHORT PERIOD I AM OFFERING THIS AT $750 SHIPPED TO LOWER 48.
I am a JTS dealer and have some of there brand new compressors to sell in stock. I am running holiday specials right now and have 2 of these available at a lower pricing than map. I cannot post the price due to MAP rules. Please reach to me so I can give you a price.

A LITTLE UPDATE HERE. I KNOW NOBODY IS BEATING ME ON THE PRICE AND ABOUT 12 MEMBERS HAVE ASKED FOR A QUOTE YET NO SALE. I MEAN I CAN'T GIVE THEM AWAY FOR FREE. FOR A SHORT PERIOD OF TIME I WILLING SELL FOR $750 SHIPPED TO LOWER 48.

I am no longer needing this, Unless you have a freebee, I will provide the shipping label *** I am looking for an ATI Nova Liberty, Nova Freedom or a Seneca Aspen *** Parts Gun *** for a project, working or not, any caliber, no stock needed, (unless it is wood). *** Must be FREE *** I will send shipping label.
Please let me know what you have and include pictures. Thanks - Mark

I’ve simply got too many slug guns and not enough time for all of them. This M3 came to me new as a pellet pusher, but I had Utah Airguns convert it into a powerful slug shooter.

• Impact M3 with bronze receiver
• 580cc carbon fiber bottle (250b)
• Dual regulators
• .22 caliber 700mm barrel
• .22 STX Heavy Liner 1:16
• .22 carbon fiber liner stiffener (not glued in)
• .22 Slug Power kit installed (probe, hammer weight, spring)
• Barrel clamp kit (screws left loose)
• Kraford & Lypt KLS-3 butt stock and bag rider
• Kraford & Lypt Gigarail 2.0
• Kraford & Lypt Gen 3 Arca Rail (with picatinny adapter)
• OEM accessories: High capacity magazine, top rail, trigger guard, butt stock, probe/weight/spring, foster fill, hard case.

Very light use. Holds air perfectly. Set to shoot mid-weight slugs: 27g at 1010 FPS or 30g at 950 FPS. This barrel likes H&N, ZAN, and NSA slugs. The power wheel is set at about 3.25 so there’s plenty of room to increase the power if so desired.

M3 with K&L accessories $1500
M3 without K&L accessories $1200

Price includes shipping to CONUS. Signature required. I prefer Zelle, Venmo, or PPFF, in that order.

-Michael

I purchased this rifle from Huma-air a few months back.. I spent a good bit of time polishing, de-burring and smoothing out the cocking lever action as it wasn’t as smooth as I preferred it to be in factory form… the same was done to the bolt and hammer as well and the end result is much improved from its out of box operation..
The reg has been increased about 1/8 turn from original configuration which now has the rifle shooting 21 grain (.217) H&N slugs very well @ 885 fps for 36 FPE..

I don’t recall shot count exactly but I believe this nets around 35-40 shots on reg.

The rifle is in a lightly used but overall great, close to “as new” condition.

Comes with 1 original mag , replacement Oring set, user manual and fill probe.
Will ship in double boxed..

Asking $430 shipped inside conus.
Thanks!

I bought this with the intent to use on my AR, but I prefer FFP scopes. This scope is made in Japan, and highly sought after in the 3 gun world. At low magnification the FOV is amazing, the glass is crystal clear, and there is no parallax down to about 10 yards. For us airgunners you can use low magnification for near targets and increase magnification for further targets. This is an awesome LPVO. Brand new.



Complete details HERE (DSMR Mil/Mil Illuminated reticle)

Retails for $850 (-40%) asking $515 shipped to CONUS. I accept Zelle, Venmo, PPFF in that order.

I have an FX Imlact M3 .25 and want a .177 bullpup. My rifle is in excellent shape and looking for the same condition rifle or just swap calibers with another M3.

Full grip/trigger housing
Full stock
Full Airtube with regulator
Cocking handle

160.00 now 135.00 shipped

Free 3D printed brown chassis/grip adapter with grip

This is my Walther LGU Master underlever, spring piston rifle in .22. The Walther LGU Master was only made from 2015 to 2017, but the .22 version was only made in 2015. Overall, it is in stunning condition, fully functional and very accurate. This is a European 16j model (12 ft. lbs); I've attached a copy of a ten shot string from today that shows an average fps of 537 with JSB 15.89 gr. pellets (see pics). Price is $850 OBO. Shipping is free to the lower 48. Payment by USPS money order, or Certified Bank Check. If you have a lot of positiver feedback and/or a strong forum presence, I’ll take a personal check.

fx chrony. I believe this a version 1. $150 shipped pp OBO

This is a collection 5 parts rifles and an assortment of spare parts and seal kits that I have collected over the years and just haven't gotten around to rebuilding/putting together. Please read through and examine the pictures carefully.

There is a BSA Scorpion Cadet Sporter 3P .177 with sight bases(front sight is not included just the base) and it's special green synthetic stock(missing the butt pad).

A BSA Scorpion SE 1200 .177, receiver/breech block (the appears to have been sawed off the air tubes are all standard length or carbine)

A BSA Buccaneer SE .22, wood stocked

And a Gamo Coyote .177 synthetic thumbhole stock.

And. Gamo Urban .22, missing it's stock and trigger group.


I picked these rifles up as part of a lot of too repair and shot show display rifles that had valve stems or fill ports removed and slowly worked my way through fixing several. Ordering large lots of parts from the UK. Have since become to busy fixing the house and with our kids to work on them so selling them now as a lot I believe there are components for completing 3 of the actions though there maybe be some small parts needed like fill valve poppet, a gauge or a valve stems etc.

I've tried to picture the majority of the parts and any others I find will be included as well.
Asking $315 shipped.
Parts totes not included, parts will be bagged and packaged.

Please look through the pictures and I will try to answer questions as well as I can but it is being sold as a lot to save my time rebuilding them etc. so please don't expect an itemized list etc. trying to price the lot accordingly.

I have a fx impact m3 and fx dynamic both in 35 cal I would like to sell. The impact comes with the gun, mag and a bunch of fx hybrid pellets if you want them. The dynamic comes with the short rail that’s on the gun and let long rail with the big front tank. they both are in great shape.
impact 1400
dynamic 1500
i will give a better deal if bought together.