First and foremost I am wont be paying retail for a problem child. I am giving you money to take that problem off your hands.

Looking to buy fx, airmaks, daystate, taipan, AGT, BRK, etc.

Not looking for low end.

Shoot me a message with what you have and what you think would be a reasonable price and let's talk.

FWB SSP pistol

Niksan Elf-S Bullpup .22, includes 4 magazines, factory hard case, probe, tools, O-ring, forearm grip with push button bipod deployment and manual all like new condition, less than 100 shots through it. The original owner won it NEW at an airgun event and fired one magazine to verify function, I fired 4 magazines through it with 4 different pellets. I decided to stick with my Beeman 1358 bullpup. See review link in last photo. -- $285.00 Shipped -- PayPal Friends & Family, (add $15.00 to cover fees if PayPal as purchase), or USPS Money Order. Trades or partial trades possible *** send a picture of what you have to trade *** I do not want breakbarrels.

Shoots pellets great! 3 mags and a bipod.

*SOLD*

I bought this .25 cal Huben v3 GK1 Short pistol new from Krazcool in the Fall of 2024. It comes with the upgraded pellet loading gate and a threaded end cap on the barrel. I mounted a Holosun HS507K X2 pistol sight on it and shot a few magazines of different test pellets through it at paper targets shortly after getting it. Around the same time I got a couple of other Hubens and this one never got any use.

It is in excellent condition, with no dings or obvious signs of use. I didn't change anything on the gun since I got it other than to add the 3D printed mounting bracket on top for the Holosun sight. I'll include a soft nylon holster which holds a GK1 with a sight mounted. Not so much to carry it around in, but more as a convenience for storage since the the foam cutout in the original GK1shipping case isn't large enough to hold a GK1 with a sight mounted on it.

The Shortened .25 GK1 pistol and the Holosun HS507K X2 sight with its mounting bracket and the holster cost me just over $2,000 within the past 6 months. My asking price on this one is $1,350 shipped CONUS. Everything will be very well padded and boxed. I've never had anything damaged during shipping over many years and hundreds of online sales.

PayPal only, No counter offers or trades considered. If it doesn't sell at the current asking price I'll eventually decide whether to lower the price a bit or just keep it. If I didn't already own 2 other GK1s I might just snatch this one up at this low price myself.

The Classifieds really help to keep the forum interesting for me.

Thanks for looking!

Jpiperson2002

nla

I have this Kalibrgun Cricket 22 that shoots like a laser, but I almost never shoot it and am looking for something new to play with. Cricket is currently tuned to shoot 18.1gr @ 923 fps with an es of 9 over an entire fill. I also have plenty of seals, probably 5 or 6 sets and a brand new Huma reg, never installed. I bought the seals and reg in case I needed them and so far, never had a single failure. Also have the tool to take the gauge out if ever needed.
I'd take $850 pp
I'd like to trade for something I will shoot a lot.
I like Brocock Snipers
Impacts
Crowns
Anything I haven't had before would be of interest, let me know what you have.

Ok, lets try this again...Kral .22cal synthetic stock bull pup. UTG 3-9x32 scope, two mags, fill probe, LDC, single shot tray, threaded shroud adapter for LDC. Extremely accurate with 21gr pellets. Holds air and functions great. Free shipping to lower 48. $325.

Good day AGN, I have a dirty 30cal/350mm barrel for the Leshiy Classic, I'm asking for $250 shipped TYD. Payment by USPMO, buy with confidence as I have about 10 pages of all Positives on the old Yellow BOI and only a few here. If you can I prefer to communicating by texting me at 92zero 4two79six08, just a lot easier to keep track of communication or you can email me at [email protected] .
Thanks Richard

Looking to sell my LCS I purchased recently from Derrick Wall. Absolutely no problems with it. I went through it and resealed everything that looked to have old o rings. I will include the 2 o ring/magnet kits I bought for it. One kit is missing the o rings I used. I had a reg creep issue, so I resurfaced the regulator valve seat and it now holds tight. Gun is a blast to shoot, but I've got another bullpup coming, so she can go to a new home. Sale will include a Donny FL 1/2-20 mod adapter, no scope included. Has a LW 12 groove poly barrel, K&L butt plate, and 580cc bottle. Gun cycles perfectly in semi auto and full auto. $1400 PayPal F&F or you pay the fees. I'll cover insured shipping.

Shoots great. Tuned to shoot 18gr pellets at 900ish fps. 1st reg deleted. Saber tactical arca rail. Comes with 1 mag, fx factory mod, and Athlon Talos BTR 4-14x44 FFP scope. Comes in the factory hard case. $1650 shipped, $1450 without scope and rings.

Selling my Western Sidewinder.30. Zero issues. Excellent condition. Comes with 3 mags, soft case. Donny Tatsu is extra
Located in So Cal. Shipping costs on buyer. If PayPal goods and service +3%.
$1500. $1600 with Donny Tatsu
Sorry but not looking to trade

I have 2 new 357 barrels for the FX Impact that I never used comes with the barrel and liner the shroud and a magazine and a probe
see pictures for condition. Selling at 225.00 dollars shipped USPS ground advantage or pay a little extra for Priority shipping.
These barrels were from the FX Impact MK-2 with the power plenum.

Payments with PayPal or Zelle and Venmo thanks for looking.

Leishy 2 OEM Air reservoir, plug for reservoir, and brace. 95.00. Went with CF tank and no longer need. If parts bought from Ed gun west 75
.00

https://www.casasbahia.com.br/reiserve/b​

I originally purchased both the Side-Shot and Eagle Vision Side-Cam mounts for the GoPro HERO7 to test and see which I prefer.

In testing the Side-Shot, I discovered that sometimes, depending on the particular scope, you may want to lock it down with a small gap between the beam-splitter housing and the rear edge of the scope's ocular ring (not pushed on and seated all the way in contact with the eyepiece of the scope). I also noted if the opening on the Side-Shot housing is larger than the outer diameter of your scope's ocular ring, or if you do mount it with the gap, you have some movement/play that can make it difficult to optimally align the camera's lens axis with the scope's lens axis, and then truly hold it there, as the housing is typically 4-5 inches from the two anchor points. Slight misalignment of the two axes was usually only a visible problem in the video if filming at max magnification (a darker outer half-ring in the video that would come and go as you moved the housing on and off the center of the axis). However, that's where I mostly film at, so I needed to address it. I also found if you mounted the camera with the gap, and a strong light hit it and entered the gap, it could become visible light flare in the video as well. To address this, I CNC machined a solid Delrin adjustment collar that fits flush against the rear beam-splitter housing. This did two things... 1) It provided a deeper tunnel to the housing, allowing you to have the gap between the housing and the ocular, but it shielded the gap from any light and eliminated any flare, provided the gap wasn't too big. 2) It provides 4 adjustable thumbscrews to position and lock the housing in place such that the scope and camera lens axes are aligned as best as is possible. This really secures the mount as it provides a lock-down mechanism at the other end of the mount, eliminating any movement at the housing/camera end. The thumbscrews are nylon to avoid any marking of the scope's ocular outer ring.

I also added two stop collars on the mounting rods to make it possible to remove and replace the mount and maintain the exact gap each time.

To me, the alignment and stop collars made the Side-Shot equal to the Eagle Vision in all aspects but one... light. The beam-splitter on the Side-Shot does not allow as much light to the camera as the 25/75% beam-splitter on the Eagle Vision. Both are outstanding, but for me, the Eagle Vision won based on light transmission. So, I'm keeping the Eagle Vision Side-Cam kit, and selling the Side-Shot.

I've posted a video of the mounting with the adjustment collar, and a photo of the kit. It includes two housing adjustment collars of different thicknesses, to allow for more gap if needed for a particular scope's setup. Mounting bracket is 30mm.

The price is $145, shipped via UPS or USPS with tracking ($279.99 new today). Add $2 if you want it insured for the full amount vs the minimal insurance routinely provided. Shipping to Continental US only. PayPal F&F, check or cash payment only. PM me if interested. Thanks!

Just to be clear... the GoPro is not included.

Hey I have too many scopes all gone

Comes with one mag and Donny tanto. Shoots great. Former owner said it likes 13.4 but I never tried them. I also bought a box of zan slugs I’ve never tried that can go with it. 975 with element helix or 800 with no scoe

sold
Texan SS .457 - beast!
everything in picture is included with moderator
price includes shipping insured
$985.00 with scope
$785.00 without
buy with confidence as I have lots of positive feedback
PayPal FF
Venmo
Zelle
note* checks or money orders must completely clear bank before I’ll ship
for quicker response text me at
251-610-8582

i am helping @GulfCoastShooter sell this Airgun and I inspected the gun today and it looks brand new…and functioning perfectly if I was a hunter I’d buy this for myself!!

Purchased new in April 2024

included in this package:
1. Pard NV008sp LRF (with original box and all factory accessories)
2. OEM Pard spare battery
3. OEM Pard dual charger
4. 128gb memory card

This Pard is in new condition and hasn't seen the field. Looking to consolidate some of my collection so this is on the chopping block as I don't need multiple[le night vision devices.

$560 shipped CONUS


If you have any questions or prefer phone/text your welcome to call or text me at 847.715.6944

Can come with element helix for $950 or without for $800. Has one mag and Donny tanto. Will get better pics later

March D4.5V24TM in excellent condition - a few light marks on the tube, light ring marks. MOA, MTR-D3 reticle

Includes box, March rings, and slip-on covers.

$1000 Shipped insured continental US, Paypal F&F or Venmo. Add 3% for Paypal G&S

Wanted... DAQ Breech for Crosman conversion...

Thanks in advance...!

LESHIY CLASSIC STEAM VALVE - LS.640.000. Basically it’s the poppet or the firing valve. 2 available. oem. $45 each . shipped f&f lower 48.​

Excellent shape magazines both OEM. .22 caliber. $200 shipped PayPal f&f lower 48.