I have several .22 springers and PCP’s. As a lefty I could let this one go. It’s got an excellent shot cycle and it’s a precision shooting machine. Nice front sight is fiber optic orange (metal and good, not cheesy) & easily seen.
Beautiful stock, not a single mark on it. Stays in a case.

Nice straight aftermarket Rekord trigger blade, Rekord trigger group, black 5 & 6mm stock screws. Leather sling and barrel band, factory one that will not come off or get loose. I’ve owned roughly 20 Thomas tuned springers and this one is fresh but broken in. No dieseling whatsoever.

It’s raining so just decided on what to list. I have no problem shooting groups or over a chronograph for fps, just not today.

LH FWB300 isn’t going anywhere.

I’m asking for $500.00 + $30 shipping/insurance in CONUS.

PM me here or email at jamesdingle18@icloud .com

Have a used HW50 stock up for grabs. Not sure how or when I acquired this but it was obviously used by a right handed shooter. The stock is in good shape however has some wear in the form of fading on the stippling. I provided numerous pics so the buyer knows what to expect. Comes as pictured, no hardware included. Asking $60.00 shipped CONUS, PP F&F preferred.

Works very well, about 11.5" long. Works for .177, .20 or .22. May fit others model Airforce. Sold gun, No longer need. $90 Shipped

SOLD PENDING FUNDS
Air Arms T200 .177 Sporter
$450 shipped L48, PayPal FF.

-This version has the pressure gauge buit into the end of the cylinder
-Includes the original peep site kit as well as a Bugbuster 3-9x40 scope.
-Original packaging
-comes with both fill adapters
-excellent condition

The gun has never been opened. It is set as it came at the low power 10meter setting but can be re-tuned to higher power if desired

16mm od LW barrel

22 inches long (including thimble)

Custom machined with thimble to allow indexing of barrel.

sale includes .20 probe, thimble, and barrel

1/2-20 unf threaded at muzzle




Exceptionally accurate barrel, hung onto it when sold the Raptor because I wanted it machined for a different gun.

Vids of testing with this exact barrel….











High water mark from when I was shooting it…




This one WILL impress.

Just looking at it and realized that there's a full 18 inches of barrel there if a guy was to just chop off the stepped down version and could then drop it into a USFT or a Thomas (something that takes a 16mm OD barrel). And the muzzle end is already threaded for 1/2x20 for adding a moderator.

Barrel laid on top of my USFT.... If I was to do what I just suggested, it'd cut over 3 inches off the overall length, and I'd have a nearly silent gun again, instead of the compromise that is the short little hugget on the current .177 barrel......Man o man, if the .177 barrel wasn't so good, I'd be going this route......Just an idea.


$175 shipped.

Paypal F&F

Deal by PM

1100$ To your door. Mounted on my impact m3 currently. Its in amazing condition no scratches!

I have a brand new s510xs Xtra Ultimate Sporter in .177 cal that has never been out of the box. The original s510 had a defect and Air Depo exchanged it for a brand new one. I ended buying another gun during the process, so I don’t need two. These guns are tac drivers with the Air Arms Diablo Field Heavy 10.3 grain pellets.

Includes: 4 magazines and one charm single shot mag. 2 fill adapters with nipple. Asking: $1,100 and split shipping.

It’s been mounted lightly on a PCP that has no recoil. No need to have ever snugged tight. Basically LNIB as it was sent to factory for upgrade turrets and set screws. All 1.5mm wrench is in there.
Asking a very fair $350 shipped. Lifetime Warranty w/ Athlon.
PM me or email [email protected]
PayPal F&F or add 3% G&S. I could always take a USPMO. Been around 15 years here and other major AG forums. 100% positive feedback under James Dingle

I bought this used from another AGN member in January. Has a few small rubbed areas and the silver marker shows my starting point. Has three swapable barrel nuts (.22,.25, and .35). Would like to get $100 for this (shipped to CONUS). Make me an offer!

Brand new. It’s shooting 70 F.P.E. and loves slugs such as 29 grain Nielsens. $600 shipped. Lovely gun but too loud and heavy for my upcoming turkey hunt. Scope and bipod not included. 2 magazines included. Foster fitting with male foster end I bought is also included. Ships in a hardcase.

Found these in a drawer and thought someone could use them, as I could use the $100.00 CONUS that I'm asking for them on something else. Removed from a HW30, comes as pictured, complete set, front and rear to include inserts. Note small section of one side of bottom of front sight missing as depicted. Will still obviously hold tight. PP F&F preferred.

sold

Testing so in need of a Ronin or Shogun. Looking to trade my sumo with cash. Pm if interested

Hello my name is Hunter and I have a .25 avenger. It has a AE Swede barrel stabilizer fitted to eliminate poi shift. Comes with hill mk5 hand pump, targets, original box, ammo, two magazines, single shot tray and scope. I have the reg set to 1800 and I get a lot of shots before refilling. With the hades pellets I have touched starling out to 100 yards. The gun is sighted in at 60 yards and at 50-60 I can take out a life saver! This gun has been very well taken care of and cleaned after every use. The gun and scope holds zero and has for 4 months. I have never been so impressed with an air gun like I have with this one.
I am asking $300 includes shipping and everything Please reach me at 903-574-1352 for any questions, thank you for your time.

I have a very nice, accurate and powerful .25 cal . It is a LCS SK-19 in 25 cal, with some upgrades ; spring, O-rings and valve, plus other. She shoots like a champ now better than when it was New.
The new LCS SK-19 sell for $2300, but mine is used. Thanks Richard

Price: $2,500 + Shipping

Status: SOLD

Note: Scope Pictured NOT included

Looking to sell barely used, Leshiy 2 .30 cal in 350mm & 250mm configurations. Pictures show rifle in complete 350mm configuration. There is some rubbing on the stock ends from standing the gun up but other than that no issues. Gun was sighted in and shot with less than 100 rounds through the 250mm configuration. NO rounds have gone through the 350mm configuration.

Description:

"The Leshiy 2 is hammerless and uses a new valve that allows consistent dwell time regardless of regulator pressure. This system allows for rapid opening and closing, and the user no longer has to worry about wear and tear with higher regulator pressure requiring a heavy hammer strike on the valve stem."

Edgun Leshiy Long specs

• OAL 29.25 inches
• OAL Folded 17.5 inches
• LOP 15 inches to the center of the trigger
• Trigger grip LOO 3.8 inches
• air reservoir volume 170 CC
• hammerless
• semi-automatic
• 8 round rotary magazine (detachable)
• weight 5.25 pounds
• Trigger – single-stage nonadjustable
  • 1 pound pull
• Picatinny top rail -20 MOA
• Picatinny bottom rail – 5 slot
• Barrel length 350 MM (13.75 inches)
• Regulator capacity (adjustable)
  • 80-160 BAR

Included with the gun

• 4 magazines included (8 round)
• OEM Silencer
• 2 magazine holders
• fill probe
• spare transfer ports
• 1 spare magazine magnet

Additional Accessories:

• Vanir MOD40 System
  • The Vanir modular silencer system combines the MOD-40 Huma stackable silencer with the Valkyrie carbon fiber handguard to make the ultimate lightweight, compact, and silent Leshiy 2 possible. The Vanir allows the user to lengthen or shorten the overall length depending on the shooter's need. Whisper quiet and honeybadger styling makes this system a must-have. The Valkyrie system is licensed by Magpul for the M-LOK accessories
• 300 Bar Carbon Fiber Tank
  • Edgun Leshiy 2 carbon fiber 300 cc tank is custom designed for the Leshiy 2 to provide the maximum shot count while maintaining the gun's exceptional balance.
  • M18 thread
  • 300 CC
  • 300 Bar working pressure
  • 12 ounces
  • 7 inches long
  • 2.5 inches diameter
  • 123% increased air receiver volume over OEM configuration (significant increase in shot count)
• JSB Match Diablo Exact pellets
  • 3.25 g, 150 pieces per can
  • 4 cans (750 pieces)
• EDGun West Guppy 100 CU-IN Tank w/ EaZy 300 DIN-Hose (Hose length 500mm)
• Hornet Mod50 System for 250mm barrel

Looking for FX Dreamline Pellet probe .22

Pm if you have 1!

Unfortunately sunday I got some bad news about one of my dogs and yesterday I had to say goodbye to her. A real gut punch but it made me realize a few things and Id like to prioritize funds a bit differently so that Peri (my other dog) can go and adventure more so instead of holding onto this while buying a thermal or a larger caliber airgun , I have decided to sell it OR TRADE for a few of the very specific things I had planned on purchasing regardless of this sale.

I will preface the whole ad with a stupid bargain buy the whole setup price.

If you buy it with the US optics ts12x, bipod, hugget, bubble level and eagle vision rings.

$2100.00 You pay for freight , all items are in like new condition and come to $900.00.



PLEASE READ EVERYTHING FOR BOTH OUR TIMES SAKE

The following is pulled from the original ad for this rifle. This is a custom one off rifle built by a very well known member here.

"This rifle is a 1 of one build. The builder claims Moa accuracy out to 100 yards with the right optics and I don’t doubt the claim at all as it’s a LASER at 50. The rifle shoots amazing, cocks like butter and is extremely accurate, powerful, and quiet at 35FPE, but per the builder is capable of up to 70+ FPE, all the way down to 1-2 FPE.

• Custom valve system that can generate high performance and is darn near indestructible.
• Custom hammer system made from a tool steel, custom hammer spring, and a really nice HST adjustment knob
• He did some work to the factory moderator (Delrin bushing insert) that really reduces shot report
• Custom biathlon cocking lever
• Lapped the chamber, re-crowned the muzzle chamfering, and full bore polish on the factory barrel."​

Everything posted is true.
The chrono graph is to show how consistent it can be when it is shooting pellets at higher than normal velocity, right now I have it set to shoot 18.13 @ 910 fps.








The following groups are 55 yard groups, over 10 shots each shooting 18.13 at 910 fps. (if you search my username youll find the thread that also references these groups)





I DO NOT SORT PELLETS!


















The stock is 100% custom stained bronze pearl effect done by a member here for me about a month ago, it came out fantastic and pictures truly do not do it ANY justice at all.













THE ONLY THINGS I WILL TRADE FOR ARE!
-Taipan Veteran Long .25 bone stock w/some cash
-AGM Rattler TS25-384 Thermal
-.30 Caliber rifle of the same value (NO DAYSTATE NO FX)

As far as cash goes I am looking for $1700 shipped and paypaled for rifle alone with no huggett, no bipod, no rings, scope, or bubble level.

The huggett was was $130 and is in new condition, the bipod was $340 and is in new condition, scope was $360 and is in new condition, rings were $100 and in new condition, bubble level was 90 and is in new condition... if you would like to add these we certainly can work something out if you were to take everything.

The rifle will come with 3! magazines and a single shot tray, factory paperwork from when it was sold new from Utah Airguns before it was built, factory box, and packed well.

sold

ALL THE PARTS YOU NEED TO CONVERT YOUR DREAM LITE TO A TACTICLE BUFFER TUBE TOP RAIL BOTTOM TRIGGER GAURD POWER PLENUM BOTTLE ADAPTER FOLDING STOCK ADAPTER PLUS NICE REAR BUTT STOCK PARTS ARE ALL LIKE NEW WITH ALL THE MOUNING SCREWS THE BOTTLE ADAPTER IS 139 NEW AND ITS NEVER BEEN USED AS IS THE 30 DOLLAR POWER PLENUM 275 SHIPPED

WTB Dreamline/Crown Arrow Kit

.257 Scandalous
28” threaded 1/2x20tpi Lilja 1:14 is excellent. This is capable of holding a 1/4” group c-t-c all day if tethered to reg and in a mechanical rest. You simply can’t have a more sturdy set up.
At 3400-3600psi you’ll get 1080fps with 72 grain RBT slugs.
At 2800-3200psi you’ll see 940-980psi. It’s set up to run at the higher pressures and without my Alkin, or place to shoot 200-400yrds I have absolutely no business owning this anymore.

I used Griffin .2573” but any Corbin swaged slugs are going to be great.

This was built by John Bowman. It’s #025 of this past year.

I’ve sold my big compressors and moved where I no longer have 300 yards out my front door. Only reason I’m selling it.


I can take more/better pictures upon request but it’s perfect. I’ve been around for 15+ years with 100% positive feedback.


Rifle alone is $2300 + shipping & insurance.
As shown with Armasight NV & .357 Emperor $2600 + shipping. Nobody wants the cheap bipod lol. I just used it for pictures but you’ll welcome to it if buying rifle.

Add a 6000psi step down in-line reg that’s in excellent shape from Joe B for $300 + shipping.
I would do entire package for $2950 shipped in CONUS.
I’m not selling the reg, NV, or Emperor before the rifle.
I would throw in a out of date 4500psi tank & fill whip if buyer picks up.

PayPal F&F or G&S add 3%. USPMO, CC or personal check all okay as long as you don’t mind waiting until it clears.
Contact me here via PM or email at [email protected]

Edit: Black block fitted between barrel and tube was 3D printed along with barrel threading and heavy duty band by Precision Rifle Works. It’s not needed as the band is rock solid. It’s more of a trial harmonic thing but it slides right out if desired. IDK what it’s made of but perfect tight fit, no scratching barrel. I honestly never got a chance to mess with that in testing and not that it could get much better lol.

Do you have one that needs a loving home?

Thanks, in advance, for suggesting to contact Allen Zasadny. I can't get a hold of him.

First choice: 400cc AZ Rapid Mk2 buddy bottle with his proprietary quickfill

Second choice: 400cc factory Rapid Mk2 buddy bottle with fill adapter (for a fill line that has female foster fittings)

Thank you!

Mounted once and went a different direction. Like new. 34mm Fully adjustable 1 piece mount. Comes with bubble level. I accept PayPal F&F.
Asking 90.00 shipped to your door.

Hello AGN friends.

Im looking for the Front sight Inserts to my hw85.


Thanks.