As the title suggests…please let me know.

Regards

Looking to sell this FX Impact X in .25. This Impact currently has a 700mm Superior Heavy Liner with sleeve, carbon fiber tube over the barrel, 480cc bottle, Saber Tactical buttstock, Wika gauges, extended picatinny rail (the rail was filed in 2 slots to fit a rail extender), High Power spring kit set up to shoot 36-37gn slugs around 1000fps, FX/DonnyFl moderator, Saber Tactical action block, Ernest’s short throw lever, and Power Plenum. I am including the 700mm standard pellet liner, original shroud, original bottom rail, pellet spring kit, and some miscellaneous factory parts. The rifle will come with 4 factory older style mags and 2 Side Shot plastic mags. The pellet liner has about 10 tins of 34gn MK2 pellets through it and the Superior Heavy liner about 30 slugs. The regulator has been replaced with a standard power Huma, the power wheel is a Monster Design, and there’s no leaks. I was starting to slug tune the rifle before RMAC but had another slug gun to get ready so you’ll need to tune it yourself or change it back to a pellet shooter if you desire. Have any questions DM me. Sale within the USA only, PayPal FF preferred, the rifle will ship UPS Ground with Insurance. I can do a local sale if you live within the Central Valley California area. No trades please.


Asking $1500 Sold!

I do have a Vortex Diamondback Tact 6-24 FFP scope with Warne mount I can include for an additional cost.

Up for grabs is a choice walnut stocked .30 Vulcan 3 500mm. The stock has great figuring. This one loves 44.75gr JSBs. Shooting them at 875 fps. The regulator is doing a superb job of keeping speeds very consistent. Pictured below is 2-mags over the chrony.

I’ve installed a 580cc bottle on this one for more shots. From a 270 bar fill, you can expect about 45 regulated shots. Also coming with the Vulcan will be DonnyFL Sumo, factory soft case, fill probe, 3-mags, owners manual and the factory box. This Vulcan is in perfect condition and is like new.

Shipped CONUS price is $1,425. I prefer PayPal. PM or email ~ [email protected]

Created: 09/06/22 11:59 AM
Description: .30 Vulcan 3 500mm
Notes 1:
Notes 2:
Distance to Chrono(FT): 1.00
Ballistic Coefficient: 0.042
Bullet Weight(gr): 44.75
Temp: N/A °F
BP: N/A inHg
Altitude: 120.00
# FPS FT-LBS PF
18 876 76.26 39.20
17 872 75.57 39.02
16 877 76.44 39.25
15 878 76.61 39.29
14 876 76.26 39.20
13 878 76.61 39.29
12 872 75.57 39.02
11 873 75.74 39.07
10 871 75.40 38.98
9 871 75.40 38.98
8 875 76.09 39.16
7 877 76.44 39.25
6 873 75.74 39.07
5 876 76.26 39.20
4 875 76.09 39.16
3 877 76.44 39.25
2 880 76.96 39.38
1 873 75.74 39.07
Average: 875.0 FPS
SD: 2.7 FPS
Min: 871 FPS
Max: 880 FPS
Spread: 9 FPS
Shot/sec: 0.1
True MV: 877 FPS

7 tins of 22 cal JSB slugs 80.00 shipped conus Thanks Catman

I have a FX silencer that measures 125 mm long and about 35 mm diameter. The outlet on the end is about 8.5 mm so it looks like it could be for .25 cal or under. I have personally only ever used it for .22 cal, and it has always worked well for me.
It is threaded with the standard 1/2" x 20 UNF. Both end caps are threaded (you can faintly see that in both picture the last inch or so is removable), so it comes completely apart for cleaning or I assume swapping out ends if you have ones that would fit.
This was what FX was selling before teaming up with DonnyFL.

$60 Shipped CONUS
Paypal or Venmo

Dreamline 290cc air tube for smaller air tube. I bought the .25 cal dreamline and it came with the larger air tube. I would like to trade it for the smaller tube.

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price via UPS Ground. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Ninja 90ci (approx 1L) air tank. DOT approved for dive shop fills. Prod date 01/2018 so still has 1 year + before needing a hydro. Comes with Ninja EZ Fill valve.

Price $175 - SPF

View attachment 295674
View attachment 295675
View attachment 295676

I obtained a BACS pistol recently with a handful of cartridges. I need to get a Slim Jim hand pump to charge them. Would also like to get a few more cartridges in .22 if possible.

Send a PM if you have anything or if you know where to buy from. I've tried some UK shops, but since the BACS system is legally a firearm in the UK they won't sell or ship to US.

THank you.

Update - was able to source a Slim Jim pump - still looking for .22 cartridges.

MINT CONDITION Edgun Lelya .22 I purchased this gun new and I have shot approximately 200 pellets through it. It loves JSB 18.13 and is crazy accurate. My backyard is only 30 yards but it will easily shoot 3/8 groups and I don't claim to be that great of a shot. The gun will come to you just like I received it. It will come in the original box with all of the documentation that was sent with it. This gun doesn't have a mark on it. As you can see i have added some carbon fiber tape that is for looks only. The tape isn't hiding anything.

Here's what's included. Gun 1,680.00 value, Two cheek pieces (the one in the pics i purchased with the carbon fiber look, it will also include the factory cheek piece that is in new condition, 2 bidpod mounting accessories (these were 40.00 each), atlas CLONE bipod that i paid 30.00 for, extra magazine 30.00 value, and UTG Accushot 4-16X44 SWAT IE scope 200.00 value. All in I have $2,050 invested in the gun and accessories.

Asking price is $1,450 with all mentioned above.

I'm only selling this to help fund a new LH AAA Evol Paradigm.

You won't be able to tell this gun from a new one! Feel free to PM me or call or text me at 405-664-4695.

This just croaked on me. It runs but will not put air into a gun. Sounds stupid I know. There is air coming out the tube but neither my FX or Uragan will increase in air pressure no matter how long the compressor runs. Trouble is that I do not remember how hard of a stream came out when it was new. It is a tiny amount now but it does put out. Benjamin/Crosman/ Velocity or whatever they call themselves cannot find this model in their literature as of today. They are looking everywhere or so they say but can find nothing. Also, a power cord that comes with it fits so loosely into its socket that it sometimes falls out. As I said, it does not work. I will sell it for $30 shipping paid to the 48 continental states and that is just to make sure my shipping is covered. Comes with the compressor and the power inverter. It was designed to run from 110 volts or your car battery. The model number in the title is correct. Benjamin kept wanting it to be a BPTC 4500 but that is not it.

Title says it all. PM if you have one to sell.

Purchased two hw35s from Krale in mid September of this year, only intending to keep one of them. I put about 50 pellets through the .177 and the shot cycle is very smooth. A five- shot string over the chronograph registered an average velocity of just under 800 fps with Crosman Premiers, and shot to shot variability of less than 7 fps. Asking US $330 plus shipping (double boxed in original packaging with lots of bubble wrap). Will discuss payment options with prospective buyer.

barrle is 20 7/8 long the trans fer port is to big buy 40 thousdands can be re machined i sell barrle and 2 mags and singal shot try all for 25 4 shiped

USED FOR ABOUT A HOUR 40 SHIPPED

Looking to trade my fatboy 2 with muzzle break for a huma mod50 setup In .30 caliber, or a hornet 350mm setup for leshiy 2 in whatever caliber. Will add cash on my end if need be.
let me know what you have,

thanks for looking.

Well….22 cal obviously. Should be like new…no oxidization.

Hello Airgun folks!,

MORE FX AND EDGUN AIRGUNS AVAILABLE.

SORRY NOT ACCEPTING TRADES AT THIS TIME.


***FX IMPACT 30 SNIPER..... BRAND NEW $2100 SHIPPED! THIS IS A POWER BLOCK VERSION! (I HAVE TWO OF THESE)




***FX MAVERICK 30 SNIPER...BRAND NEW $1700 SHIPPED (I HAVE TWO OF THESE)




EDGUN LESHIY2 .25 SOLD! SOLD! SOLD!




***USED .22 CALIBER M3 LIGHTLY USED. VERY GOOD CONDITION. POWER BLOCK $1700 SHIPPED

Thanks everyone for the choosing us when considering your next airgun purchase! We really appreciate your business!

***Free shipping to the Lower 48***. All other shipping locations will be quoted separately if needed. For Sale in the USA only.

Payment type accepted are: USPS money order, Paypal (you must pay 3.5% fee, unless you choose to pay via friends and family). ALSO, NOW ACCEPTING VENMO & CASHAPP. ZELLE ALSO ACCEPTED.

If you have any questions, REQUEST FOR PICS OR MORE INFO, please contact us via email or call:

[email protected].... phone: 971-301-4080 (please leave message/text if no one answers)


If you need tuning services or repair for your airgun please feel free to contact me!

971-301-4080

PRECISIONPNEUMATICPRODUCTS.COM

***SOME OF THE PICTURES ARE GENERIC, HOWEVER WE ALWAYS TRY TO UPLOAD PICS OF THE ACTUAL RIFLES OR PRODUCTS. MOSTLY NEW RIFLES WILL BE GENERIC PHOTOS. YOU CAN ALWAYS REQUEST PICS OF THE ACTUAL PRODUCT LISTED. WE USE GENERIC PICS FOR CONVENIENT POSTING OF ADS.

WTS/WTT this Benjamin discovery rifle in 22 cal. Scope does not come with the gun. I just went through the gun and replaced all the seals with captain O ring seals. Holds air forever. I also painted the barrel and air tube camo. It's just good spray paint I also refinished the stock with min wax and there is one tiny scratch near the butt plate but you really need to look close to see it. It's all stock parts except the power adjuster. This was a gun that I bought to try cyclops Joe's min wax stock refinishing video and also to practice camo painting. I'm asking 160 shipped or would trade for a mil dot or moa reticle scope of equal value or I would be willing to trade for a marauder pistol and I would throw in some cash if the price was right. Open sights were removed before I bought it. Second picture has the small scratch I was talking about.

One has to go unfortunately and it's the 25 with Arken sh4 6-24 ffp mrad with all arken accessories, ergo grip, donnyfl, 480cc tank, 2 mags $1600.00 perfer local pickup on this transaction. Columbus, Ohio

I have way too many rifles so looking to sell a few that I’m not shooting at all. All guns are in excellent condition and have been very well looked after! Prefer to deal by text.

1. FX Maverick .25 Sniper - like new in box! comes with 1x mag, FX hard case plus all paperwork. Super powerful and laser accurate currently shooting JSB 33gr at 970fps - $1450 shipped

2. FX Impact Gen 1 .30 - comes with 1x mag, FX hard case and paperwork. Gun is in excellent shape and is very accurate. Also includes a .22 barrel kit (barrel, shroud, probe) plus pellets pictured - $1200 shipped - SOLD

3. Taipan Veteran Standard .22 - beech wood stock. Best trigger I’ve ever shot. Includes gun, 2x mags, single shot tray, 3D cheek piece, mag holders plus DonnyFL hammer spring adjuster. Laser beam shooting 18gr JSB at 900 fps. Will prob regret letting this go - $1050 $1000 shipped SOLD

4. Evanix Max Full Auto .177 - amazing gun and super fun to shoot. Just had serviced by Boris at pyramid air! Come with 2x mags. Full auto is impossible to find in .177 - $1500 SOLD

5. Cricket .25 Synthetic - power tuned by Charlie at Georgia Airguns - comes with 3 mags, picatinny rail for bipod, OEM cheek piece, extra trigger blade -$975 shipped


PayPal gift or add 3%! Serious Buyers ONLY Please! I'm on BOI with tons of positive feedback, so should you! Thanks for looking!

PM for additional information or pics!

MOD EDIT - REMOVED EXTERNAL CONTACT INFO

Does anyone have a programmer for a RW they want to sell? I really appreciate it.

(Found) Looking for a used but working like new Barra 400e. Please don't waste our time by trying to sell me a beat up one with issues. Thanks Tom (TMH) !!

Well, I screwed up but got it covered with a different set of rings.

Today, I received a Vector Optics scope and got Weaver Rings vs Picatinny. So who wants them?

$30 shipped within CONUS. PP FF or Venmo. From past experience they are solid rings, just don't need and can't use them.

Hey guys. Donnie Reed here, formerly of Baker Airguns and All Things Airgun.

I'm selling my personal FX Bobcat MkII 30 caliber. It's slightly worn, but will still shoot sub MOA at 100 yards. This gun has won several 50yd and 100yd benchrest competitions.

Holds air, works perfectly, and is in good condition except for the following (see pics):
1) Small ding on shroud
2) Scratches on left side of grip
3) No magazine
4) Regulator gauge reads 70BAR even thought it's set at 150BAR. Been that way for a long time. Reg still works perfect so I never changed the gauge.

Comes with DonnyFL Ronin and adapter, added lower and right side picatinny rails, and has sling swivel studs installed. Includes fill probe. Bipod NOT included.

Asking $650 firm. Price includes shipping in the CONUS up to $75. Buyer pays any shipping over that amount. Payment via PayPal Friends and family ONLY. No trades.

sold