AEA Barrel Band Hand guard, Allows you to attach your accessories.
7mlok slots.

Looking for Dedal scope by Ed gun let me know what you got..

***SOLD***

MINT Brocock Atomic .22 w/Precision Micro Hammer Adjuster and Upgraded Folding Stock and Bug Buster 3-9 scope and rings

Never leaked and never had ANY problems.

30 Day Satisfaction Guarantee*

Zelle accepted. If you want to use PayPal, add 3%

Located in CT USA.

I am original owner.

More than 2 years warranty left.

$1,299
No Sales Tax unless shipped to CT

Target image below at 30m from bench frest
LIKE NEW

*Terms apply

I'm looking for a right hand Field Target stock for my TX200 HC. Let me know if you have one you're not using

Thanks, Jason

Looking to trade my m3 .22 600mm barrel assembly for a 380mm barrel assembly in .22. Would also consider a hunter compact barrel or 500mm barrel

Like new serpent arms 28ga air shotgun.. best deal u will find of one of these guns.. asking $1000.. will go back up after the weekend

(PayPal friends and family only)

This GK1 is loaded. Gun remains in mint Condition. Over $1000 in parts alone.
See photos. $1650 or best offer. PayPal friends and family Venmo or Zelle. **** bipod not included****
The only trade I will consider is an American air arms mini.

Hi,
I need a 22 caliber bolt for a Benjamin Marauder rifle. If you have one, let me know how much you want for it and how you'd like to get paid.
Thanks,
Jon

Dennis quackenbush 58 cal outlaw pistol never shot new 350 rounds of assorted ammo and a tactical bag pistol scope rings add wood grips for it all and round ball mold 900 + shipping

(((looking for thermal Scopes or trades and offers )))
Bushbuck 45 no scope 1000 + shipping

Seneca eagle claw 22 brand new 350+ shipping
Extreme big bore 408 cal with scope 800+ shipping
Extreme big bore 50 cal 510 diameter like new 1000+ shipping
Air force texan 357with all the accessories 1100+ shipping
Mike kobel citrus 257 cal custom build area carakote finish custom build Neil clage modular like new 1400 + shipping 3600 psi fill pressure 1-14 twist barrel 30" long 53" overall
Air arms 25 cal lamante stock regulated 35 shoots on a fill 8
700 + shipping
Jack Haley 457 cal thumb hole stock custom build 1200+ shipping

DAQ 58 cal pistol new with ammo and bag scope rings wood grips 900+ shipping
If you won't the case with the rifle 25 dollars more make me a offer I will send pictures with my name your name dates and more pictures at your request thanks
Will









do

KO

Citrus 257 cal custom made out of Florida buy Mike kobel nice and accurate ffp scope thumb hole stock timmey trigger cerakote finish Neil clage modular 1-14 twist barrel no heaver thin 85 grains 3600 fill pressure but it 3300 works best 1117 ffp 1400 + shipping shoots good groups at 200 yrd if you do your part fine made rifle over 2500 new
will99

Extreme big bore 40 cal like new 700+ shipping
I have bullet mold and ammo for extra if interested thanks

Texan carbon fiber 457 low shot count with Dimond stock and bipod donnyfl adapter $1500 + shipping oor with out the stock 1000 + shipping

Brand new sightron Slll never mounted $1200 shipped

Was on a Notos but not anymore. Excellent shape. $50 shipped PayPal f&f lower 48

Great condition sl30, just to powerful for my back yard. Looking for possible trades for something else. Thanks.

7 unopened tins, 500 count per tin (plus one partial).

$90 shipped CONUS. PP F&F. Not interested in trades at this time.

This is a very special custom rifle from my personal collection that will make someone very happy. It was a labor of love that I spent a lot of time on to perfect. My goal with this build was to make the rifle reliable, bulletproof, and as accurate as I possibly could with both pellets and heavier high BC slugs for field hunting, NRL22 / PRS, and benchrest. The results on paper speak for itself. Example 13 shot group at 50m through a scope cam:


Every part that I machined and fabricated from scratch use the highest quality materials that I could source, all of which contribute to the performance of this rifle. The build history was captured in several different posts on AGN and Instagram, but I'll try and recap some of the functional upgrades that I made for it.

FX Maverick .30cal

- Kraford & Lypt KL-MAV chassis - Comes with both the Compact Arca Swiss rail and a longer modified Sniper Arca Swiss rail. I also have multiple long and short K&L Picatinny T-slot rail inserts for them to run Picatinny/Weaver bipods and hardware.

- KLS-2 stock with titanium posts - Much lighter with the 6AL-4V titanium rods. This is the best stock IME for the Maverick as it allows for the shouldering point to raise up higher and it's solid. I modified / rounded the tips of two high grade cap screws for clamping the Y adjustment axis without marring up the rods like the factory set screws tend to do




- Carbon Fiber + Titanium Barrel Shrouds & Titanium Thread Protectors - Made from very high-quality (very pricey) high modulus carbon fiber from Rockwest Composites and certified 6AL-4V titanium. I made one for 500mm and the other for 600mm barrels with a revolver style titanium end cap for each of them. The end caps were designed to work with the barrel system, but they can be run on other riles using a polymer stopper that I made and they are both VERY effective at dampening barrel harmonics!









- Custom Barrel Tensioning System - Titanium locking ring integrated with the factory barrel supports. The titanium ring seats into the forward barrel support and the titanium end caps on the shroud slides over it to seat the shroud and provide the tensioning point. Works amazingly well. You can pick up the rifle by the shroud and use it as a baseball bat and not damage the barrel (not that I recommend this, but it's that SOLID!











- Titanium shorter action lever system - I milled the lever from 1.25" 6AL-4V titanium rod stock and the handle with 3/8" 6AL-4V rod stock from the same material source. It took me two tries to machine the lever perfectly (screwed up the first one one of the last machining operations), but it was well worth it! Nailed the tolerances and the cocking action feels so perfect with a high-end firearm like smoothness.









Also made a precision spring that seats against the cocking rod guide on the opposite side of the lever. Combined with the leverage "over travel" snaps the lever down snugly for field use. It took a lot of trial with different sized springs to get it JUST right, but I was able to find the perfect balance of resistance for keeping the lever closed snugly and being able to cycle ammo for rapid fire.


- Pellet & Slug Probes - I have the factory FX pellet probe in .30, a titanium pellet probe and slug probe in .30, and titanium slug probe in .22.




- Modified Magpul MIAD AR Grip - I milled and polished this grip to fit the rile. It feels AWESOME, and has interchangeable fore grip inserts that can change it from having the finger rests or a straight profile. Definitely a 1 of 1 grip for this rifle.


- Titanium cocking rod guide (threaded) with Delrin 150 (slippery grade, press fit inserts - there's (4) total components that I made from scratch for this piece. I broke the factory aluminum rod guide shooting from a bench, so I decided to make an indestructible replacement along with upgrading the cocking rod to eliminate slop (see below)

The first one I made was stainless. Eventually got the itch to make another one in titanium.


- 5/32" Music wire cocking rod - I bent the factory rod like pretty much everyone else with a Maverick / Wildcat. Went with a 5/32" music wire (C61 hardness). It's just a tiny bit larger in O.D. than the 4mm factory rod, which had way too much slop. This music wire rod was a nightmare to thread, however it has been flawless and as straight as an arrow for the duration that I have ran it. It also greatly improved the sloppy cocking action in conjunction with the titanium cocking system that I custom fabricated for this rifle.




- Modified cocking rod connector - Drilled, milled, and threaded a beefy M4 cap screw to prevent the rod / probe assembly from dislodging the (2) M3 factory set screws at high power fixing a total factory design flaw! This allows the rod connector to clamp against the rod from both sides.
- Modified AMP regulators - Using upgraded spring washers and the awesome brass + polmyer tipped adjustment screws. Shots are extremely consistent at all power levels.
- Magpul Paraclip - works great as an attachment point for a single point sling (I have more Magpul hardware to run a second one forward for dual point slings)

- Kraford & Lypt Modified Gigarail & Full Gigarail - Duracoated Pictanny.



- Kraford & Lypt Dovetail Rails - One in raw aluminum and another in black anodized. Looks like this:




- Modified cheek rest - Made it low profile as it should have been for optimal flexibility for the scope height.



- PEEK valve - More efficient with extra travel and heavier valve return spring
- Hammer weights - I have a 26gr FX Tungsten and a variety of 485 marine brass, and the factory steel.
- Hammer Springs - Standard and custom heavy spring
- Stainless hardware - 316L for the most part, all from McMaster-Carr (not the cheap overseas stainless)
- Orion Iguana Hunter deep cavity FX magazine covers - Orion designed these durable factory replacement magazine covers for me so I could shoot the old style 62 grain Varmint Knockers slugs, and they work perfectly!
- Custom made Delrin 150 bottle gauge shroud - Made a black shroud for the FX branded Wika gauge.
- Blued (male) stainless steel fill port - Looks cool
- Spare Parts - I have a bunch of spare FX factory parts for this rifle. All of the o-rings are brand spankin' new and very high quality.
- Magazines - I have (5) of the 13-shot factory .30 mags with several low profile lids from Orion, (1) grey Orion .22 mag (18-shot), (1) FX .22 mag (18-shot), and (1) high capacity .22 mag from Midwest Airguns and (1) .30 high cap mag from Midwest Airguns.

- Barrel / Rail Support Stainless Helical Thread Overhaul (18-8 stainless M3 steel Helicoil thread inserts) - The factory aluminum thread can strip out, so these completely mitigate that problem and allow for the rails to be properly torqued.







- FX Carbon Fiber Air Cylinders - I have 350cc, 480cc, 580cc. All of which have been wrapped out of the box with thick rubberized insulation.


Barrels
I have several different barrels / liners and shrouds for this rifle that shoot with sub-MOA precision: I have vetted and tuned all of them.

Match Grade 600mm TJ's .30cal (1:26) - Hammer forged CrMoly. I bought and machined several TJ blanks for this Maverick before I finally got one with a perfect bore to work with. Used a custom live piloted chamber reamer that I had Dave Kiff from Pacific Tool & Gauge make for me to machine the lead in specifically for the TJ's with a 2 degree lead and optimize it for heavy slugs and pellets. I was specifically setting it up for the original style 62 grain Varmint Knockers (sub-MOA with both the swaged slug in the hard 8.5 BHN alloy and regular soft Corbin lead), but it does well with a variety of 55-70 grain slugs. I have a bunch of 62 grain ammo that I can include with this barrel.

Meticulously lapped the bore with a micro-taper and it's a frigging laser beam. Also shoots 50.15 grain JSBs with supreme precision and it doesn't lead up nearly as fast as other barrels. I always use a good rod to clean it with a Kroil soaked cotton patch, followed by a Ballistol patch and a dry patch. The carbon fiber / titanium shroud that I made for it is the icing on the cake.

Threaded 1/2-20 UNF on the muzle end with a custom high flow 485 marine brass inlet on the breech end.

330mm TJ's .30cal (1:26 twist) - I machined this barrel from a blank to build an ultra compact configuration. Originally ran it with a DonnyFL Ronin + extension using the factory chassis and an FX cylinder from a Dreamline, but I have since dedicated DonnyFL Koi to it as part of the complete barrel system. Shoots very well with pellets and slugs.

Threaded 1/2-20 UNF on the muzzle end with a Ernet Rowe high flow brass inlet on the breech end.





- 500mm FX Superior Liner .30cal (1:37" twist) - This is a real gem of a liner. I have a high quality precision carbon fiber sleeve bonded to it with 638 Loctite. I have only shot pellets with this barrel so I don't mess up the bore with unecessary wear and tear from leading. It's been very carefully polished and I've only used a good cleaning rod with appropriate sized patches to clean it when it needs it (it shoots lights out for a long time without needing patches run through it).


500mm Shrouds - I have a carbon fiber + titanium tensioned shroud and the original FX factory aluminum 500mm shroud. I also have a custom made black Delrin shroud extension with a 7075 aluminum threaded insert (1/2-20 UNF) that I made for the factory shroud to extend it out just far enough to run a 480cc bottle. This is what it looks like in action during an NRL22 match:


- 700mm FX Superior Heavy Slug Liner (1:18" twist) - Shoots superb with the newer style 62 grain Varmint Knockers in standard soft lead.
- 700mm FX Slow Twist Pellet Liner (1:44" twist) - This liner is also very special. It was in an MK2 Impact that I bought when they came out.
- 700mm FX Slug Liner (22cal, 1:16" twist) - Excellent with pretty much every .217" slug that I've tried.
- 600mm FX Slug Liner (22cal, 1:16" twist) - ^^^^^^^
- 600mm TJ's .22 (.218/.222 1:14" twist) - Shoots rimfire size projectiles. 1/2-20 UNF threaded muzzle and the FX thread with a factor brass inlet on the breech. This one may be spoken for already, but feel free to inquire about it.


Terms:

This is a tough one to price out. I'm going to include the KLS-2 stock and titanium lever, rod guide, rod and KL-MAV chassis and a couple of magazines as part of the basic configuration for 1400 and split the shipping. Shoot me a message with the barrel(s) that you're interested in or give me your number and I can reach out to you to discuss. Can include all the above if the price is right (make me an offer).

Serious inquiries only please. Not interested in trades.

...

11 unopened tins, 150 count per tin (plus one partial).

$100 shipped CONUS. PP F&F. Not interested in trades at this time.

For sale is this like new Athlon prism scope . At 4x power , it provides some magnification while still maintaining a wide view. I used this optic as a go to on my Brocock Ranger.
Great for off hand shots at 20 to 30 yards , it's hard to beat. These sell for $280 - $290 + tax and possibly shipping...........street price. This one is being sold for $235 including tracked and insured shipping to the conus only. Not interested in trades or offers at this time. PS , this is listed on other sites. Please deal by pm. Thanks for looking...............Herb

Looking to purchase a Ed gun alpha precision, 250 mm barrel also 450 mm barrel also interested in the behemoth rail and mod

Great Feinwerkbau Model 65 Competition .177 Caliber Air Pistol. Single stroke, side lever, pneumatic.

This pistol won more International and championship matches than any other air pistol in its day.

The metal and its finish on the pistol is excellent. Includes original packaging and paperwork. Test fired and shoots like new.

$600 shipped insured.
PayPal FF please

Excellent shape OEM barrel. $150 shipped PayPal f&f Only