I'm looking to see if someone out there might have an aftermarket target style stock for the Air Arms S200 or CZ200. If you have something you are willing to part with, please let me know!

Thanks
Tobin

I have a Gary Canes stock for sale. This stock is incredibly comfortable and is designed for field target shooting. I used this in competition and it is great! The LOP is around 14”-14.25”. It has an adjustable palm shelf, adjustable butt pad, adjustable cheek rest, and an adjustable 2 piece knee riser that allows for the cocking lever to fully extend.

I am selling this because I am slowly moving away from FT competitions and I have not used these rifles often enough.

The notable imperfections are all pictured in the post. There is a notable scratch from the cocking lever pin that was moving on my rifle and made some marks on the adjustable knee riser. Luckily it is not very visible as it is on the inside of the knee riser. Also, the laminate seems to have a slight crack where the action sits on the stock (also noted in the pictures).

The stock comes with 4 action screws. There are 3 thumb positions including 2 thumb up positions.

I am shipping for $1000 conus. I am accepting payment via PayPal FF or Zelle. Let me know if you have any questions. Thanks!

I bought 2 of these in all the tariff panic and now realize I do not need both of them, used this on my big bore which I am also selling in order to buy more new toys. Bought for 600 only used a couple of times, everything works perfectly. It comes with scope, eye cup, scope mount, 2 batteries, charger, manual box and T25 wrench

$500 and ill cover shipping

Only trades I'm interested in is a Garmin chrono or a glass optic of equal value

PayPal for payment, I can provide my eBay profile as well for review which shows 100% seller rating.

can message me here or [email protected] or 661-319-2323

Basically brand new, bought it for coyote hunting but have only taken it out mainly target shooting for about 100 rounds and now I have new toys I want to buy. Everything works perfectly and gun is awesome, shoots the 235 grains really well, very strong and consistent gun all around and in great condition. The Donny FL is in perfect condition and only used on this gun. There's about 120ish of the Texoma .235 slugs and I've not used any out of the extra bags you see in the pic. Rifle comes with 2 mags and fill probe. in original box

Optics not included

Rifle bought for $1000 will sell for $800
Ammo spent close to $175 will sell for $100
Donny FL bought for $240 will sell for $200

BUY IT ALL FOR $1000 and 50/50 shipping

Only trades I'm interested in is a Garmin chrono +$ or a glass optic of equal value or +/- $

will sell PayPal what ever you're comfortable with, can provide my eBay account for refence as well for my past selling history which is 100%

Feel free to reach out here or [email protected] or 661-319-2323

WTS 2 x Vector Veyron Scopes as in picture.

Used and in all good working condition

$140 Shipped each or $240 shipped for both


Text:
806 566 7190

Garmin Xero C1 Pro
Very good condition

Incl origenal box as in picture.

$400
Byuer pays Shipping from Zip 58201

Text:
806 566 7190

FX Impack Mk3 Compack in 5.5mm

In very good condition and have seen vwry little use.

Origenal Hardcase
Booklet
1 x Origenal 28 shot mag
1 x 3D magazine
3 x Speed Loaders
End Cap
Laminate bud pad & Cheek piece
Origenal bud bad & Cheek piece incl

Excl Scope & Bipod
Byuer pays Shipping

Wil ship from zip 58231

Text or Face talk welcome:
806 566 7190

$ 1350

I have for sale a modified LGU for WFTF competition. The kit comes with everything pictured. The only thing you will need is a knee riser for the T slot system (a knee riser is NOT included).



It comes with:

-Walther LGU .177

-picatinny riser rail

-Bruno Silva skirtless, lightweight piston

-Air stripper (Rowan Engineering using a muzzle thread adapter)

-button match trigger

-windicator

-Rowan engineering cocking aid

-Bruno Silva Alutec stock



The rifle is an amazing shot. It has approximately 2 lbs of felt recoil. The only issue is the anti bear trap pin tends to loosen out, so I put a thin layer of plastic to hold it in place (as noted in pictures) and I have not had any issue with it for years. I also indicated any wear/imperfections in the photos as well.



This rifle prefers the AA 7.9 grains but it shoots any of the AA or JSB 8.4s very well also. The shot strings for JSB 8.44 (4.52) are as follows: 752, 752, 746, 752, 746.



Also note that the safety mechanism is disabled due to an aftermarket trigger install. Please be aware of this.



The reason I am selling is because I already have 4 fully built WFTF rigs and I just don’t have time to give each one the attention they deserve. So I will be selling some of them off in the upcoming months.



I will be sending the rifle $1100 shipped to you. I am shipping conus. I will be using usps. I have PayPal FF or Zelle. Let me know if you have any questions. Thank you!

Like new CO2 adapter for the AirForce PCP rifles. It is in as new condition including the box and instructions. I have two - $40.00 each or both for $75.00 shipped/insured. PayPal friends and family is preferred but I’ll also accept a money order or a check with a hold for clearance.

Beeman SS2 rifle scope in like new – mint condition - $225.00. PayPal friends and family is preferred but I’ll also accept a money order or a check with a hold for clearance.

HOLD - PENDING PAYMENT.

AGN Moderator approved my post beforehand, allowing the posting of this post with the photos of two moderators. The buyer gets the choice of ONE of two moderators.

Hubens GK1 in .25 Caliber. This was sourced from Ares Tactical. I am the second owner. The first owner purchased new, had a major accident that paralyzed him for a season, and required more than half a dozen surgeries. He claimed to have gotten less than 100 shots through this before the accident, and I believed him based on our extended conversations. He sold everything, including his compressor.

I would much prefer a face-to-face meet-up in SoCal, if possible, so the buyer can put this through its paces.

Holds pressure beautifully. I've filled it up to 305 Bar (4500psi) because I don't have a compressor that goes beyond this. At either 305 Bar or 150 Bar, it holds pressure perfectly up to 1 month at a time without any drop. That's the longest I've gone without shooting this. My shooting sessions are short. I've put a bit less than 400 pellets through this, primarily using the GTOS and a few rounds of JSB Exacts. I've never had a jam, but 400 rounds is not a lot. The JSB GTOs and Exacts seats beautifully. I have never tried slugs.

This does have the less common and more desired feather tube carbon fiber which matches the Hubens Moderator perfectly, if this matters to you.

The only functional defect I found is that the rear sight sight blade/leaf can be moved around the screw axis. (Just the leaf, not the rest of the sight which is rock solid stable.) It works perfectly, but one needs to be aware not to bump it when shooting. This does not matter in the least if you are going to mount a red dot or scope.

$990.

Hello members
Yes, I am still looking to find a side lever or multi-shot breech for the Benjamin Discovery rifle.
The one that I prefer is branded as the "Exclusive Breech", although I will consider others.
Please PM and let me know what you have

Once again, I'm 2 decades behind

Thanks
Edward

Good Day All, $1500 shipped CONUS

FX M3 Impact as pictured, has the 30 cal installed but not really tuned, also a 22 cal liner. Both are 700mm, Has the Saber Tactical Bag rider and ARCA Rail, Barrel Tuner, 3 speed loaders 30cal and 2 speed loaders 22cal. I added the FX side mount and Sekhmet digital gauges, also an Outgun Side Mount in a kit bag. It has the unbranded Power Block from what I understand

I tried to mount the Outgun side mount and that is how I managed to be a dumb A** and scratch around the gauge when I removed the FX gauge. Then opted to just put the digital on instead as had issue with the two pins that hold the Outgun two piece mount together.

I bought this here in the forum first of the year and attempted to shoot some and tinker, with lots of reading and great info on here. But as my job keeps me on the go, I have no time to invest in what all this takes and not sure this is my cup of tea. As note there may be a slight leak somewhere perhaps with my install of the gauges as it will leak down after several days of sitting.

I will take any of the electronic payment PPFF, VENMO, ZELLE, etc., will package up tight and ship insured.

looking for a factory grip liked this one so much put on my fx rifle its factroy grip that comes on the karma eq and sts

I'm interested in a 24"/.25 Airforce barrel with the two bushings included. Let me know what you have.

Air King .22 sidelever. T-06 trigger. Non-recoil spring piston. I bought it lightly used indoors and have never had it out to shoot...it lives undisturbed in my safe. One pound trigger, 21 FPE. Call/text Ron 714-296-7489 Asking 550.00 shipped.

.

Hello, I have a 25 caliber Marauder for sale. I bought it new intending to find the pellet it likes the best but I'm currently liking my 22 Mrod better so I'm selling my 25 Mrod. It has held the same air pressure in the picture for months. It comes with the following:

Rifle

2 magazines

H&N pellet sampler (unopened)

One full tin of JSB 25.39gr and about 75 in another tin.

One tin of JSB 33.95gr = (about 300)

One tin of JSB 25.54 Hades (about 200).

I'd like to get $405 for everything shipped in the US.

Hey guys it’s been a while since I’ve been on the forum. I’m trying to sell my AA TX200 since it hasn’t been getting much use recently and I have gotten into other shooting disciplines.

I'm selling my tuned Air Arms TX200HC .177 with walnut stock and a MTC Mamba Lite 4-16x42. The rifle also has a custom 1/2UNF adapter plug and an aftermarket metal cocking lever handle. I used to have a DonnyFL Sumo on the rifle and it was incredibly silent.

I bought this gun tuned and short-stroked from another member here. It’s firing at ~12ft/lbs and is incredibly accurate- even I can pull off quarter inch groups at 20 yards; and that’s with the cheap walmart tin of crosman pellets (previous owner told me he had done the testing and the rifle loves them).

Here’s a link of the previous owner’s write up about all the hard he did, and the great results he achieved.

https://www.airgunnation.com/topic/new-tx200-hc-177/

The rifle is in excellent condition except for a few scratches which I've included in the pictures. I’ll include the original factory parts that the previous owner had swapped out for short stroking and tuning.

-$775 OBO shipped CONUS for the rifle and scope
-$700 OBO shipped CONUS for the rifle only

I’ll accept PayPal, Venmo or cash

Please contact me if you have any questions or would like any additional pictures

frount grip from fx panthra zero degreee 20 shiped on it

WTB:
RTI Barrel for Prophet
.22cal

The RPB version (that came out with the Prophet 2 and 3).
Regular length (24"=600mm)


Shipping would be to Orlando, FL.


Let me know what you have.
Thanks for looking.

Matthias

I'd like to buy single shot trays for the RTI Prophet.

In .22cal -- and in .25cal!

3D printed is just fine. Got any?

I'm not looking for a single shot LOADER (Orion-style), but a TRAY, i.e., just an open thing to lay the pellet on.


Shipping would be to Orlando, FL.
I'm not in a hurry with this.


Thanks for looking,

Matthias

I have a war warp package for sale. Rifle is a .25 caliber. Currently shooting the jsb 25 grain pellet at 930 fps. This tune shoots less than half inch at 35 yards. The gun has been rebuilt by Jim gaska himself. No leaks. Has the original tank on it but also comes with a 700 cc tank. Hugget magna moderator. Adjustable rear stock. Element helix 6-24 scope and bipod stays on it. 1,000 dollars shipped conus
Will post pictures shortly

In like new condition and was used for developing custom parts. Very accurate and the build quality is great and similar to the P35/Bullshark. This kit includes (I have rails and holders made in black if you want to swap out. The blue ones shows up better in photos.) bipod tri-rail, side mounted magazine holder and 6 magazines. 2 are OEM and the 4 are custom 12 shot mags. Bipod not included. Scope not included in price but can be added. The scope is a Vortex Strike Eagle 4-24x50 EBR-4 MRAD ILLUMINATED Reticle Riflescope SFP and the mount is a UTG accushot mount. Price without scope is $325 shipped to the lower 48. Add $300 for scope and rings/mount. Cashapp and M/O accepted. DM offers accepted. If you want the tri mount and mag holder in black, let me know.

​

Stainless steel upgraded spring

Compressed Spring is made of high-quality materials, wear - and corrosion resistant, it can reduce vibration and noise, improve the precision and service life of your Air Rifle.


Brass hammer weight

5.4g weight, ability to open valve at higher pressures for shooting heavy slugs & pellets


Get the power and consistency you are after.

26.00 shipped CONUS only

Handguard for Western Mordax [email protected]

made from aircraft aluminum.

M Lok on 3 sides

weight 6.5 oz

$119.00 OBO plus shipping