Looking for .25 cal 600mm Superior Heavy liner for fx impact m3. Let me know if you have one. Thanks

Hey guys! Took my new .177 Field Target out for its maiden voyage today at the weekly Tuesday “Old Geezer Match. It was set up at 26yds with a 1” KZ reducer installed and was shot with 12 FP Springers and 20 FP PCP rifles. It worked perfectly. Then at midway it was moved to 53 yds and reducer was removed and then shot at with the same rifles. Again it worked perfectly. Was easy to reset and when paddle was hit it went down.
The reducers are installed on the outside of the faceplate as per AAFTA rules.
I don’t have a video of it working but it is very reliable and showed no damage at all.
I bought my own welder and am doing my own welding. So I am able to reduce the price on them. Anyone that purchased any prior to this I will be dealing with each on an individual basis. I have been asked to have them fall at a 55 degree angle so there is more movement in the target. I will start making more of them and will have mechanisms in stock and will just need to know what faceplate style you want. I can cut almost any design for the faceplate. More intricate designs are a bit more $. The new design now have less welds and and only 3 visible welds.
Contact me if you are interested in them. They are high quality and are not the least expensive targets available they run $130 plus shipping. They come with 2) reducers of your choice.
For a well made and trouble free target give it a try!
I have tested my new design regular FT in 4) matches and yesterday was a 60 shot match. Target worked perfectly and had no issues. I will test it again next Saturday in another local match. But so far so good! If you want just one size KZ I can cut it for you.

Looking for an FX .25 600mm Slug Liner A for my Crown. Please PM me with pics and price shipped to Ohio.

Thanks!

I have 3 unopened boxes of .177 7.9gr premiers all dated 2018 die B for sale @ $25 a box plus shipping. If you buy all three i'll throw in another partial box of the same with them. I no longer have the gun that shot these well and would entertain a trade for superdomes in the same amount if anyone is interested. I'll take a postal mo, thanks for looking.

As the title states...




0.561 outer diameter

Machined with 1/2x20 threads at muzzle and M14 threads on the other end so it will drop into a Taipan Veteran.

Full disclosure is that this needs to be considered a project (depending on expectations), either for a Veteran or having the ends lopped off and machined for something else.

Here was my experience with it....https://www.airgunnation.com/threads/dont-feel-left-out.1243430/post-1413680

I never tried heavy slugs.

If interested, shoot me a PM and I can give more history on the barrel.

$150 shipped to Continental US. Paypal F&F.

Moderator is from my .25 cal. $65 shipped to continental USA addresses
I’ll throw in tank as well since I don’t foresee ever using it.
Payment thru PayPal

Thanks for looking
Gabe

Replaces the crappy factory mounting system that the Pard comes with. No more spacers needed! This will allow you to mount to your scope without having to keep a permanent piece attached to the scope. Also allows you to move from scope to scope with ease. I used once to do some night time pesting, no longer have a Pard so no need for it.

$75.00 shipped CONUS.
PayPal FF, Zelle, Apple Pay.

630-618-8275.

-Andrew

Hey everyone I’m looking to buy one of these UA Velcro patches if anyone has one lying around. Thanks.

Message here or text 630-618-8275

Umarex ready air compressor, basically brand new.
$300 plus shipping.
Thanks
Michael

This is most likely a search for the Holy Grail but I am looking for several more of the .35 cal Inovairtech air cartridges to go with my rifle. If you have some left over from a long gone Inovairtech Mac 35 please let me know. I might consider other calibers as well in the event that I re barrel the .35 to another caliber. Message me and we can go from there. Thanks

Hi, I would like to try Open Class or WFTF FT but cannot comfortably get into a sitting position.
Does anyone have a Steady Aim that they could sell me? A thorough internet search struck out for me.
Thanks
Jonathan

Looking for a couple spare FX .25cal Wildcat Mk3 16 round Magazines. ( I believe the Maverick and Dreamline mags fit too?)
Also looking for a spare 22 round mag for my Dreamline in 177 (of same design)
Figured I'd ask here before buying new elsewhere.

I'm selling my P8X as I no longer shoot. I had the rear sight modified to accept a red dot. I mounted an Sig Romeo 5 that I had from another gun. I want $1700 as is, or $1500 without dot plus shipping. If you want this send me a message. You can check my seller/buyer feedback on Accurate Shooter forum. Thanks for looking.

I have 25 and 30 700mm STX Crown barrels (no probes), FX Crown Synthetic and RAW HMX Walnut Sporter stocks I’m looking to trade for FX Crown custom dipped/painted stock or Crown SaberTactical chassis, FX Crown Yellow Jacket stock, 22 380-500mm STX Dreamline (Thin) or Crown, 22 RAW HMX barrel kit, HMX YellowJacket, Red or Blue thumbhole w riser Laminate stock, HMX chassis.
All mine are used not abused condition.
Also willing to trade a.....JSR Mini 30 2, WAR Flex 25/30, WARp 30, Zborai Kozak 22, 2 custom RX2’s (20k-22), .20 Sheridan SS-BS fixers/shooters (5x bundle) for-
working RAW HMXs (preAF or AF w throw lever), AAA 22 Evol , 22or25> Huben K1, XR Brk Commander/Ghost, Sk19, Matadors, Vulcan3, WC bottle or IR LRT and Thermal scopes.

Keahi

Looking for pellet or slug probe for FX Maverick/Wildcat, in .22.

If you have the matching magazine and 500mm superior barrel laying around, I can take that too.

Open to trade with my .25 (500mm superior barrel + probe + magazine), for your .22

Want to buy a side cocking breech.

Let me know what you have.

Cam

camsprecisionairguns(@)gmail.com
(Nine16) dive31-2349

I’d like to buy a lightweight, compact scope for my Uragan Compact .22. Something along the lines of a Hawke Airmax 2x7x32. Thanks in advance!

Less than two hours run time total on the Yong Heng w/ Mobil 827 Rarus oil only; has never gone above 50 C temperature; fills the 45 minute tank from 200 to 300 bar in about 25 min; everything works correctly, no leaks; total combined cost here is well over $550...get a reliable, independent air source here for a big discount...the water reservoir/tub not included...
1) Genuine Yong Heng compressor with less than two hours runtime and all its accessories including functioning water pump(215$)
2) Tuxing filter including all its accessories(89$)
3) Fan and Power Strip(30$)
4) 45 minute Scott air tank w/ fill valve and gauge(105$)
5) Four Uncles High Pressure Air Hand Pump w/ all it's accessories(59$)
6) the rack that everything is mounted to(34$)
7) Mobil 827 Rarus 12oz oil(this is the 12oz currently in the Yong Heng, not separate) high pressure oil designed for high pressure air compressors(19$)
$400 local pickup only near Harrisonville, PA 17228

$1725 or a Brocock Ranger and an HW75/Beeman P2 for everything listed below.

Early Leshiy 2, .25 / 250mm. Shoots ragged 1 hole groups of JSB Exact King and NSA 36gr / .254 out to reasonable squirrel ranges. Kings currently at ~815 fps.

Gun as set up is as quiet as a short barrel L2 can get, as flexible for pack carry as possible, arguably as good of a small game woodswalker setup as can be imagined.

Extras included:

All the stock extra pucks, back plates.

350cc bottle from Edgun Spain.
Short top tube from Edgun spain. LOP at 14". Original top tube included.
Yankee Hill Machine bottom rail. This hugs the stock shroud avout 1mm off perfectly.
Striplin 1/2 UNF adapter. Already installed.
Behemoth 4 stack and QD adapter.
STO insert, already installed.
STO 250mm in long shroud insert.
Prototype STO action cover.

This was the gun STO used to develop their products

Gun has a ding on the edge of the aluminum faceplate of the butt stock. It does NOT effect the operation or integrity of the gun. The two shots from before I sanded the burr off did scratch the finish of one mag face plate, which still works perfectly.

Never had a leak. Gun has operated flawlessly in adverse conditions from -10 degrees hunting in the upper midwest to high summer in SETX.

Selling because it is too much thump to use in my back yard. Even at 815 fps Kings rip through an inch of duct seal and ring the back plate of my trap. I love this thing but I can't use it regularly in our small backyard.

Original box included, not pictured.

Zelle or personal check and wait to clear only. No Paypal.

Just one month till my move. Selling my air guns. Once the guns are sold I have a Shoebox set up along with a 30min tank and fill assembly that I would like to sell to some one local very cheap. Message me with any questions.

TalonP tuned with a .188 ring loc. Changing fill pressure and power wheel will change power from 28fpe to 44fpe with 25.4 jsb's. The top hat also has an o-ring under it. Getting 14 shots at highest power and 26 shots at 33fpe. I'm running it at 37fpe for 21 shots w/i 2%. Has butt stock, DFL adapter, 3D printed mod (same size as Sumo and almost as quiet). Auto setting safety removed, trigger springs replaced. Scope shown not included.
$525 shipped east of Mississippi, add $10 for further west. SOLD



Also have an AirArms S200 in .22. Has Huma regulator and Altaros fill assembly that uses a probe. Gun is tuned for 40 plus shots at 16.5 FPE with Crosman pellets. It's 18FPE with 18.1 JSB. The gun loves the CPHP in the tin. Cheap very accurate plinker. Also have an extra cylinder that has the original fill assembly. I do not have a DIN300 adapter, but was able to get it filled to about 70 bar and it's been holding there for months. Scope and sling not included.
$600 plus shipping from 21009.

Don't have any room to shoot this beast. 30 cal Vulcan 3 with 700mm barrel. Also comes with 4 mags, original reg, currently using a Huma, original hammer spring, currently using heavy HS, fill probe with spare orings. Bipod not included, $1275 Shipping included. Also have a whole bunch of AVS slugs in .3063 which is what this gun's barrel likes since it's a .306 I'll include all the slugs for additional $100 let me know either way. Paypal F&F or add 3.5 percent fees or personal check, check will need to clear prior to shipment. thanks - SPF - SPF - SPF

Bought 2 mags for a gun I will not end up getting. Never used. 25 cal. $160 for the pair. Paypal F&F or add 3.5 percent for fees or personal check. Check will need to clear if we never met before. Thanks

Terry bought both of them,
Athlon Argos BTR gen 2 6x24 x50 FFP scope, I got two of these for sale , Got the OEM box and all for one just as it came, The other one will be shipped in a regulator box, Both come with flip up lens caps , Both scope sare just like new and super clean, 310.$ for the original box one and 290 for the one without a box. Shipping to the lower 48 and Pay pal please, Wrong book in picture Not, Helos

DM me if available.

Up for grab is Wylie LDC .22 from John Frey (Bullysyclone)

It's made of aluminum & carbon fiber
It’s 1/2 thread.

Here is the Wylie next to the DonnyFL TatSu for comparison.
Lighter in weight and as quiet as DonnyFL.

Here's what it looks like on one of his M3 compact.

Just received it from John a few days ago.

$125 shipped.

Paypal Friend & Family or 3.5%

Venmo, Zelle, CashApp.

You can contact me at 504-231-2466.
Thanks for looking,
Andy