I have a dirty 30cal /350mm barrel for the Leshiy Classic. These are hard to find almost like hens teeth. I'm asking $250 now $220 and Finally $200 shipped. Deal by texting me at 92zero 4two79six08 or email me at [email protected]
Buy with confidence as I have about 10 pages of all Positives on the old Yellow BOI and only a few here. Will post pics ASAP.
Thanks Richard

Hi,

I've been looking for a Joe Brancato's Alpha filter, but I can't find one.

Do you have one to sell or please, can you tell me where I can get a new Alpha filter?

Thanks and best regards,

Alex

Come with everything in photo. Complete kit ready to install. $250 to your door. Deal by email. Pay pal works for me. [email protected]

**UPDATE**
Now this package includes the 480CC Carbon fiber bottle. Unfortunately, I don't have a degassing tool so I can't degas the tank CF tank so I'll just throw it in. However, I did utilize a spare o ring so there will be no more spare o rings. More than fair trade off.

---

Original Post minus Strike though, and underline, and BOLD texts

$500 + $40 ship (You can add insurance if you would like). Not willing to separate. Selling my Umarex Zelos in .25 caliber. It is in very good condition. A few scratches (Pictured below) and from what I recall, 2 cross thread screws (1 per side) that holds the butt stock (Received with the 2 screws cross thread from factory). I also drilled a hole at the rear of the butt stock so I can access the hammer tension spring without removing the butt stock. Shoots quarter size groups at 50 yards with JTS Dead Center 25.39gr at 905FPS. Comes with some spare parts. See list below. NO SCOPE, NO SCOPE MOUNTS, NO GUN CASE (Comes in Zelos factory box, will double box when shipped), and NO CF Bottle (You will get the bottle valve fill nipple adapter from Airgunarcheryfun)

What you will get:
Zelos in .25
Aluminum Air tube
SnowPeak Bottle Valve fill nipple adapter WITH 480CC CF Bottle (When filling it is squeaky, but it holds air. When I received this from Wes from Airgunarcheryfun, the air gauge came scuffed but does not block you from reading the pressure gauge)
4 Big Air Precision Magazines (3 Pellets [One pellet prototype magazine which is black] magazine and 1 slug magazine,)
6 OEM Zelos .25 Magazines
Additional foster fitting caps, air regulator rubber covers, (I think I have additional o-rings for the aluminum air tube) , extra screws for the stock, (I think an extra end cap to protect the 1/2 x 20 UNF threads)
Bubble level that is double sided taped to the air gun
Bravo 3D Baffles (Already installed)
Bravo 3D Barrel band for the Aluminum air tube
GOGOGO Sports Pro Range Finder
Zelos OEM Box, tags, manual

AGAIN, NO SCOPE, NO SCOPE MOUNTS, NO GUN CASE (Comes in Zelos factory box, will double box when shipped), and NO CF Bottle (You will get the bottle valve fill nipple adapter)

I am only taking Paypal F&F or Goods & Services with you paying the additional fees. Message me with questions. Selling to fund another air gun.

600mm .25 cal alpha precision barrel and 4 boxes of NSA .254 33.6gr slugs. $300 shipped

Three bipod pkg. Deal.
1 Atlas 9"
1 wide tilt 10" with 19" wide stance.
1 Caldwell 9"

$75 for all FIRM! (only, will not separate). Plus you pay shipping. You pay shipping. PayPal for payment
PM me for pics, having trouble downloading at the moment

DianaSkyhawk. SOLD!
AKA Artemis P 15
Walnut stock, 22 Cal.
Huma regulator with XL Plenum
4 eight round magazines, 1 single shot tray, 1 air fill probe, 1 Donny FL Tanto suppressor, 1 3‐way adapter ring fits lower tube for mounting lights etc. 1 Huma set of instructions.
1 FX wireless chronograph
1 black carry case.

Price is $500 Plus you pay shipping.
No trades no haggle FIRM!
PayPal for payment
PM me for contact info
See link below for pictures NOTE: 3 Bipods in last picture NOT included

****REDUCED***Air Arm S 400 Classic .177 caliber SS Like new condition. Adjustable two stage match trigger assembly, moderator.​

NOW $725.00 NOW $650.00 Plus Pirate rate shipping​

(

(5) Shots 35 yards
JTS .177 10.4gr
Shot count: 5

Low: 828 FPS
Hi: 831 FPS
Avg: 829 FPS
Spread: 3 FPS
STD Dev: 1.0 FPS

11-Mar-2025 11:22:32,828,FPS,15.8,FT Lbs,
11-Mar-2025 11:23:03,829,FPS,15.9,FT Lbs,
11-Mar-2025 11:23:43,831,FPS,16.0,FT Lbs,
11-Mar-2025 11:24:35,829,FPS,15.9,FT Lbs,
11-Mar-2025 11:25:09,829,FPS,15.9,FT Lbs,

Prefer a laminate to replace the original but would be happy with Synthetic or even a Saxon if in good condition.

Thanks.

$45.00 Shipped To You

These rings are almost new, I mounted them on my rifle then removed them, back in the package they went.
I decided to put a different scope on that rifle.

Paypal Only

Free shipping CONUS ONLY

Located in Canada/Ontario/L4G7X4 and prefer selling in CAD.

Abandoning the .25 cal because I am shooting actively .22 and .30 cals and really no need a calibre in between any longer.
My Impact MK2 arrived to my hands somewhere in Mar.2020 with a .25x700 STX-A liner, and the rest of the liners/barrels I collected along the line, purchase all new from the dealer AGS.
These are the two barrel kits FS, priced each $500 CAD or we can talk trade (in full price):

- .25x700, comes with two liners, one mag ($60 CAD + tax from the dealer), one x700 barrel tensioner ($60 CAD), one CF x700 liner sleeve, one extra high flow transfer port ($50 CAD), and one pellet/slug probe.
- .25x600, comes with two liners, one mag ($60 CAD + tax from the dealer), one x700 barrel tensioner still in a bag you can cut it to your own liking ($60 CAD), one CF x600 liner sleeve, one extra high flow transfer port ($50 CAD), and one pellet/slug probe.

Liners polished and crowned, all orings replaced to new before storage. The orings on liners are NBR 90.

x700 barrel shroud with integrated tuner ($200 CAD) for OBO trade.

I have also .25 cal Edgun Leshiy2 barrels for sale in other thread.

Shipping is on buyer.

Hello...

Found one...!

Thanks...!

I'm selling my lightly used x505 FT falcon scope.

I installed this on my TM1000 and use it for a season, decided to go a different route to a scope with a 12x marking.

This is the FT version capable of ranging to 10 yd, and it has then optimized by the factory to have a larger distance between 50 and 55 yd on the side wheel. Included is a picture of the markings on my side wheel.

Here are the factory specs.

Falcon Optics X50 Target 10-50x60, MOA200 SFP Reticle, 1/8 MOA

• SFP MOA200 reticle
• 30mm tube
• 60mm objective lens
• Screw-on sunshade included
• 1/8 MOA click value
• FT Parallax 9>300m
• 16x marking on magnification ring for US Hunter Field Target
• Field of view @ 100m: 9.84 ft. - 2.32 ft.
• Eye relief: 4.5 in. - 3.8 in.
• Length: 16.89 in.
• Weight: 1.87 lb.
• Made in Japan

Asking $800 shipped.

Contact me here, via text at (nine16)531-2349

Or

camsprecisionairguns(@)gmail.com

$1000

Pristine FX Wildcat mkIII Sniper in .25. This rifle is in like new condition and completely stock except for a couple of external upgrades:

1. adjustable buttpad purchased from JD3D Printing (UK)
2. dual magazine holder purchased from a fellow AGN member and installed on the rail
3. short UTG picatinny rail installed on forend for bipod
(all of these are pictured below)

Other than what's listed above this rifle is bone stock and will come with everything (magazine / fill prob / manual)!!!

I have a number of accessories (optics, moderators, bipods, etc.) that we can discuss and put together a package deal if that interests you.

847.715.6944



NOTE:
Everything can be negotiated if it is done with respect and kindness!! Shipping is on you & I would encourage you to use Pirateship.com to save a ton!! Your welcome to call or text me at:
847.715.6944

Searching for a edgun leshiy 2 .22 cal barrel in 600mm...need ASAP

Letting this go $2500
Had it on evil 30 Cal but decided was too much power for what I do. It’s been sitting in a safe. It’s 99% the 1% it’s from pulling it out of the box and mounting it. Scope mounts not included.

I am checking to see if anyone has some of these not being used before I grab some from NSA.

Want to trade my Gamo swarm Mag Gen 3,
It shoots 25 fpe with 15.5 gr and up to 29 fpe with 20gr, will trade or sell. something similar or $180

FX M3 30cal, 700mm barrel,480cc bottle, slug power kit,Backbone top rail ,bag rider, huma 2nd reg.csrbon sleeve,The Arca swiss 2 rail is not included as it is going on my M4 and stock M3 trigger guard will be installed. Yokozuna is also Not included, .Currently tuned for RMR/Hybrid slugs. This was a 600MM and now has a 700mm.
Does it shoot great? Yes. Does it function as it is intended? yes..
Has it been taken apart and serviced/repaired for leaks?? Hell yes it has.. Is it in flawless condition? No absolutly not, this riffle has has 1000's of rounds threw it and used for a tool to dispatch feral farm pests . Its in really good condition but sure there is nicks and rub marks. I can take as many photos ,videos whatever u want so u get a good clear look .
Reasons i want to sell/trade? Well i got a M4. why let it sit around. Will entertain trade offers. cash can go either way depending in trade. What intrests me? semi autos, western sidewinder/rattler, huben, FX, rti, agt,edgun and any other rifles that are powerful and accurate. asking $1,400bo.

Came with a used DW I bought a few years back, which had a 700cc aftermarket bottle installed. DW was sold with the 700cc bottle... and somehow forgot I still had this one till doing some clean out today.

$120 shipped CONUS. PP F&F. Open to trade offers.

Item is in new and unused condition.
-Clayton Horn
Precision Sport Airguns
[email protected]
541-647-3971 texts ok

PANTHERA​

A Dedicated, Purpose-Built Air Rifle made to win .22lr precision rifle competitions


The FX Panthera is unlike any previous FX Airguns rifle. It is a dedicated slug rifle, purpose-built with precision competition in mind, accelerating the FX
Airguns legacy and pushing the boundaries of airgun performance. The Panthera includes technology displaying a generational leap-forward for an airgun.


It begins with the new Dynamic Block, a new breech block designed from the ground up for performance slug shooting. The Dynamic Block utilizes a compact one-piece valve. This High-Power / Short-Impulse Valve is extremely efficient while allowing an immense and precise flow of air.


The plenum design (i.e. Dynamic Plenum) feeding the Panthera is revolutionary and the first of its kind. It is an over-the-barrel plenum which provides a consistent regulated pressurized plenum around the barrel,adding increased rigidity to the barrel as well as allowing multiple plenum lengths to be employed to match the caliber and power of the rifle. Precise levels of pressure are maintained by the single AMP MKII Regulator. Three sizes of plenum will be utilized initially: a Micro Plenum (sub 12ft/lb rifles), Macro Plenum (62 cc) & Magnum XL Plenum (156 cc). The results of the Dynamic Breech & Plenum are extraordinary!


Testing has yielded constant 10 shot strings with standard deviations in the low 1.0–2.0 range and extreme spreads as low as 3-4. This ability to precisely control air flow paired with the world-class FX Superior STX barrel using premium slugs will yield competition wins, and not just in airgun competitions. .22LR precision shooters will identify the ability to shoot the same BC slugs and weights they are used to, but with the control and standard deviations that only FX Airguns can deliver.


Stock is designed for competition. It features a 14.75” long Arca rail complete with M-LOK sections and a barricade block nestled next to the breech (you can achieve an ideal balance point by adding external M-LOK compatible weights or internal FX Barrel Weights that attach under the shroud). The Panthera further fits the shooter using a fully adjustable buttstock and an adjustable cheekpiece that is also ambidextrous.


Air source is a 300cc carbon fiber bottle attached in the rear and is filled via a rear located foster quick disconnect. The Dynamic Block has a larger breech than previous rifles that allows projectiles up to 13mm in length. It uses the Standard Side-Shot Magazine but with a newly designed deeper lid to accommodate longer length slugs. The FX Panthera employs the Quick Tune System (the same as found on the FX Impact M3), uses a 20MOA picatinny scope rail, comes standard with a zero-angle AR grip, and has an ambidextrous sidelever cocking handle that is reversible to the left side of the rifle. Dual angled Manometers on the left side of the block show the bottle pressure and the regulated plenum pressure.


The FX Panthera will be offered in three configurations, the Panthera 700, Panthera 600 & Panthera 500 (corresponding to barrel length). The Panthera 600 & 700 utilize the FX Superior Heavy STX barrel liner as standard as they have been purpose built for slug shooting. The Panthera 500 uses the standard FX Superior STX barrel liner that shoots both pellets and light weight slugs. The rifle allows for the quick change of barrel liners but changing calibers and affixing different barrel lengths to the Panthera can only be done by an authorized FX dealer.


Additional accessories will be offered to further customize the rifle including a bag rider, barrel weights, offset M-LOK weights, smaller profile competition Mini-Mag, Picatinny accessory sections, and an optional tungsten hammer. The new FX Panthera will forever change the precision rifle world. It feels and shoots like a precision 22LR, enjoying straight back recoil, but with laser sharp precision and accuracy only found with an FX Airgun!


Standard versions comes delivered in a tailored cut-out hard-case.


Note: Muzzle energy listed in the specifications of each rifle is for maximum setting. Due to differences in regulations the rifle is often produced with a lower muzzle energy from the factory. Contact your dealer for more info about muzzle energy in your region.

NLA

Carbon fiber guppy tank with two gauges, quick, disconnect, hose, and padded travel case. $230 including shipping to Conus. Not interested in any trades.
PayPal f&f or Venmo excepted

Picked up another Royale 500 and have an extra synthetic stock laying around that will not be needed (swapped my 400 synthetic to laminate).

Fits the Royale/Boss FX platform.

Does not come with stock bolt.

Pics to come….

160.00 shipped