Good Day All, $1500 shipped CONUS

FX M3 Impact as pictured, has the 30 cal installed but not really tuned, also a 22 cal liner. Both are 700mm, Has the Saber Tactical Bag rider and ARCA Rail, Barrel Tuner, 3 speed loaders 30cal and 2 speed loaders 22cal. I added the FX side mount and Sekhmet digital gauges, also an Outgun Side Mount in a kit bag. It has the unbranded Power Block from what I understand

I tried to mount the Outgun side mount and that is how I managed to be a dumb A** and scratch around the gauge when I removed the FX gauge. Then opted to just put the digital on instead as had issue with the two pins that hold the Outgun two piece mount together.

I bought this here in the forum first of the year and attempted to shoot some and tinker, with lots of reading and great info on here. But as my job keeps me on the go, I have no time to invest in what all this takes and not sure this is my cup of tea. As note there may be a slight leak somewhere perhaps with my install of the gauges as it will leak down after several days of sitting.

I will take any of the electronic payment PPFF, VENMO, ZELLE, etc., will package up tight and ship insured.

I have a pressluge press and die in .22
.216 up for sale $800

Everything here is brand new. Had a build planned and just don't have the desire to do it again.

Prod 2 stage trigger frame
Prod hammer w/ striker
Pcp conversion kit w/ regulated drop block. That alone was $100.
Buck rail 2240 stock tube
3D printed grips
.045 hammer spring
Magnum Airpower disco valve screws
Prod gauge block
Prod valve poppet
Disco valve poppet
8" chopped Prod barrel
3D printed Prod barrel band
TKO22 3D printed 1911 trigger for 2240
A 1077 co2 tube

Just getting rid of what I have left from the platform. Just keeping the couple airguns I have anymore.


$150 shipped which is a friggin deal
PAYPAL CASHAPP OR VENMO

Tank, Valve, Etc. Air Venturi 100ci, Amazon Tuxing options, etc. Something small and portable for on the go and would work for 1-2 partial refills on a smaller (sub 300cc tank)

I have a 1.5 yr old JTS Aircuda Max in .30cal that's only been fired less than 100 rounds. Rifle is in perfect cosmetic shape and 100 % working condition. and I'll provide photos and additional details.
Im located in near Kingston, NY.



MOD EDIT: REMOVED PRIVATE EMAIL. PRICE IS REQUIRED. PLEASE EDIT THIS AD

I am in need of a trigger sear for an early Daystate pcp. For my understanding, the sear from all early rifles is the same - Huntsman, LR90, Beeman Mako, Mirage, Harrier.

I'm happy to buy complete rifles, parts, etc. But after breaking the sear in one of mine (be careful rapid firing to discharge all the air from the gun!), I'm most interested in this part.

I know it's a long shot, but if you have something, please let me know.

Up is my Air Arms Prosport in .22. Gun is about 3 years old and about 1 tin of 500 through it. Stock was replace with walnut stock about 2 years ago. Gun comes as shown with Hawk mounts and 2x7x32. Gun has some blemishes but is still a beauty. I tried to show blemishes in pics other that the small flaws in shoots awesome with H&N field targets. Can send more pics on request. Will remove scope when shipping. $800 shipped OBO Paypal and Zelle.

Hi guys.
I got a Fx Panthera 700mm .22 cal for sale
It holds air and it works geat, powerful and accurate.（rubber buttpad is missing and there are scratches please see pics）
It will come with 2 mags, some slugs and Fx hard case
Scope, rings, bipod, lift and cabinet is not included
$1100+shipping or best offer
I want to trade something short and light weight.
(Panthera compact, Edgun matador r5m, Airmaks krait lite compact, Taipan veteran short, Fx Crown 380mm, Huben GK1)
Thanks.

I posted a thread about this earlier as it came to me as a trade for money owed.After a week of shooting its not my type of rifle and more of a time capsule for early FT shooting guys. I'm a spring gun guy mostly anyhow.
Gun is in working order and in very nice shape and holds air.Foster fitting to fill.Scope is a Leupold Vari-X3 6.5-18 EFR boosted to 20-40 by Premier Reticle when they were doing them through Leupold .it's FFP with .25 MOA dot best I can tell.No cap for elevation turret at this time but they are free from leupold .A small ding on the ocular and objective lens but otherwise very clean.

I have the Leofoto LS-223CX Tripod with LH-25 head. This tripod is barely used and in perfect condition minus a small cut / nick in one of the leg adjusters ( see pic ) I glued the area to seal it. Currently on Amazon for ~$150.

Includes everything pictured.

I'm looking to see what's out there for a used fx impact m3 or m4 preferably. 30 cal sniper rifle. I'd consider a .25 or .35 also and maybe even a little shorter barrel. I've scoured thru the classifieds and all the good deals are scooped up. Let me know what you got and what your selling it for.

Have a terrific day .

580cc Carbon Fiber FX Bottle
$200 Shipped

PayPal G&S (+3.5%) or FF ONLY

Ok guys just testing the waters on this to see what happens.

I have a post in the Field Target section about not getting the rifle to feel right when shooting. There is nothing wrong with the rifle, I just can't get comfortable behind the rifle and would rather look at something more comfortable and easier for myself to shoot. This is USFT #86 that I purchased last summer from a fellow member who used the rifle for some benchrest shooting. The rifle shoots as it should and is as accurate as you could want. You will have no question about "if you are going to hit the target" it will be what did you do as a shooter to miss the target. I have been shooting the JSB 10.34 pellets and have the rifle under 20 ftlb for Hunter division. I was planning on going to an event at the oakdale gun club in July, so if the rifle is still around I will be down there shooting.

What is included.....

USFT #86 unregulated rifle
Seal kit
Knee block and a block to allow the use of included bipod

Would rather keep the scope, but if someone really wants a "ready to shoot" package we can work something out if needed.

Payment would be through paypal, or personal check, or cash if willing to deal in person around my area. Though the check will have to clear before rifle would be shipped. Shipping can be discussed with buyer.

Trades.... not really to sure right now as I have my eye set on a few different rifles. But always willing to see what people have or are willing to trade or deal with.

Large amount of .177 19gr hollow base Griffin, bought years ago and not sure how many there are. At least 200, Then close to 100 each of .249 H&N 40gr, .253 AVS 30gr and .3063 AVS 60gr.
Will trade for .177-.178 pellets or slugs
.25-.251 pellets or slugs
.30 pellets and. 303 slugs
Make an offer

I have a set of Predator Sniper Styx in great condition. These are the 3 leg version and include the optional sling. I got them a few years ago from someone getting out of the sport but I don't use them. From what I've seen online, they are considered to be very good shooting sticks although they don't appear to be made anymore.

The legs are 39" long tip to tip.

I bought this from the original owner on here a few months ago. Only shot it a few times because life got in the way. Ready to pass it on to someone else at a great price.

I just replaced o-rings #26 and #59 (bottom valve seal and brass screw seal) because of a slow leak. Charged it up yesterday and no pressure loss for over 24 hrs, but since the GK1 is mechanically complex, the buyer should be comfortable with servicing or willing to ship it to a dealer.

Price is $900 shipped and insured (Zelle, PP FF, Venmo FF). I'm relatively new to AGN but have lots of positive feedback on AR15.com. I'm happy to verify my ar15.com feedback, talk on the phone, FaceTime, video chat, send more pics, etc. I'll ship within one business day.

Comes as pictured with the following:

GK1 $1,500
Saber Tac bottle rail $60
5KU MCx Stock $100 ($60 overseas + $50 shipping to California)
Buckrail grip/stock adapter $65
B5 Systems grip 22 $20
GK1 spare parts kit $30 (I'll have it shipped to the new owner)
Buckrail Moderator $40
Vertical foregrip $10
Wolfiek Group loading gate $25
Factory thread protector
Spare parts kit minus o-rings #26 and #59


TOTAL NEW COST: $1,850

*** SOLD *** BAM * XS-B50 .177 * Excellent Condition, Single Shot, thumbhole stock. Beautiful gun, Chinese copy of a Daystate Huntsman that holds air and shoots great. Check out Tom Gaylord's review on this gun... https://www.pyramydair.com/blog/200...pwb3pOt8PKoVVQSyXJbJ6Xr_2az0no5SRc63WRnTxRj3W , he was impressed! *** SOLD *** Shipped and insured where legal only - PayPal Friends & Family, If PayPal goods or services add $12.00 to cover fees, USPS money order works too! Trades considered , Please send pictures of what you want to trade. No breakbarrels.

Up for grabs is my American air arms 22 caliber mini.
The gun is currently tuned at 905 ft./s with 15.89 grain Hades.
Super accurate, also shoots just as good with JSB 18.3 grain.
if I remember correctly around 860 to 870 ish ft./s.
Gun dose show sign of use but nothing major.
It also has a custom carbon fiber shroud, which has been also wrapped with viny carbon fiber
wrap as you can see in photos.
comes with 2 magazines, 1 factory, and 1 carm.
pressure and regulator gauges have been replaced with Huma gauge.
$1550. Shipped. Payment can be made.
PayPal friends and family Venmo or Zelle.

I shot a group today.
I also mounted a Discoveryopt HD2-12x24SFIR.
brand new scope. It’s nothing special, but I have to honestly say it’s a pretty good scope for the money.
Everything works as it should, light and elevation clicks are right on the money.

THIS IS A GREAT MEDIUM POWER SCOPE SURPERB GLASS , DAYLIGHT BRIGHT RED ILLUMANATION ,

The S-TAC 3-16x42 FFP employs an illuminated Mil-Hash reticle for intermediate range applications where a smaller optic is needed. The MH-2 reticle has an illuminated crosshair with hash marks in 1/2 mil increments. The FFP model also utilizes an easy to set Zero-stop mechanism with.1 Mil clicks for tactical applications. The scope offers 20.4 MRAD of elevations adjustments for even the longest shots PARALLAX SIDE FOCUS TO 10 YARDS , THIS IS THE MORE EXPENSIVE MODEL WITH BETTER TURRETS , 30MM TUNE HERE IS LINK FOR OTHER SPECS ,
pRICE $400 SHIPPED WITH OEM BOX

Hello members
Yes, I am still looking to find a side lever or multi-shot breech for the Benjamin Discovery rifle.
The one that I prefer is branded as the "Exclusive Breech", although I will consider others.
Please PM and let me know what you have

Once again, I'm 2 decades behind

Thanks
Edward

Up for sale is a like new condition FX Impact M3 .35 bundle. Comes with 750rds. Only shot 3 mags worth. No leaks. Been holding air over a year. Many upgrades and extras. Some installed, some not. Everything included is pictured. $1700 Negotiable. Shoot me an offer, worse I could say is no. Would trade for Karma SLS compact .25 Free UPS Shipping to CONUS. Venmo, PayPal FF GS. Yes I understand I'm a new member with 0 feedback, but don't be scared. I'm a stand up guy with 100% ebay rating, if that's worth anything to ya. Anyway thanks for looking! Have a good one!

List of included Items:
Donny FL Ronin Moderator
2x FX Side-shot mags MKII
200x FX Hybrid Slugs
400x FX Pellets
100x JSB Exact Pellets
50x Polymag Predator Pellets
Huma Air Slug Power Tuning Kit w/Xfer Port
FX M3 Power Block/Power Plenum Upgrade Kit
Saber Tactical TRS Rail
Saber Tactical Arca Rail (Gen.2)
Saber Tactical Adjustable Buttstock
Saber Tactical Cheek Riser
FX Impact Hammerseat Tool
FX Impact M3 Bench Mat UA Logo
All Stock parts included:
FX Hardcase, M3 Owners Manual, Buttstock, comp.

It is this style of mag but in .177 cal here are a few sample pics from AOA for reference of the style ( older version not the newer flip open style )



Pics of actual mag below .




PM me if interested in a trade and have a wonderful day . Thank you for your time and consideration

I'm interested in a 24"/.25 Airforce barrel with the two bushings included. Let me know what you have.