For sale is this Scott 30 minute tank with new 300 DIN flow restricted valve and 20" micro bore fill hose. I lucked into several of these tanks that were obviously surplus units (your tax dollars at work). I removed the Scott valve and replaced it with a new fill assembly with a male foster fitting on the tank and fill hose with female fosters on each end and a strain relief the whole length. This tank makes a great compromise between the large 60 minute tanks and the small 90 cu in bottles. This tank is dated 09/07 and therefore past it's "15 year service life". Due to it's age , no commercial business will fill it. You must have your own compressor that is capable of filling a bottle of this size. Use this at your own risk and assume responsibility . I have aired this tank and checked for function , and it is ready to go. Selling for $180 including tracked and insured shipping to the conus. To comply with DOT rules , the tank will be shipped empty . Not interested in trades or offers at this time . Please deal by PM . Thanks for looking. Herb...................PS, this is the last one I have for sale.

Selling my FX Wildcat MK3 BT VP (600mm Barrel) .30 with an upgraded 480CC bottle. Wildcat is in excellent shape with minimal wear. This air gun shoots amazingly well and accurate. Shooting .30 caliber is too much for me and I prefer shooting my .25 Maverick. Shoots JSB Hades 44.75gr at 900fps. See shot string below from the previous owner. I have not made any adjustments and I have only shot about 100 pellets. I get about 4 magazines per fill. It'll come with the DFL RONIN moderator and 2 OEM FX magazines and an unbranded gun case. DOES NOT COME WITH DNT ZULUS SCOPE OR MOUNT. $1200 shipped. Paypal F&F (Preferred) or G&S and you pay the additional fees.

**If you buy this within a week of my posting, I will include 5 FULL tins of .30 pellets** (Post date 3/8/25 | End date 3/16/25)

RAW Micro Hunter in .177 caliber for sale in as new condition including one magazine and original factory hard case (scope and rings not included). It shoots 15.5 fpe and gets 50 shots per fill. I have not played with any adjustments since I purchased it new. Retune it to 12fpe, remove the stock and you will have a great pistol for PFT. Price is $1175 shipped to your CONUS location. I do not accept Paypal but accept cashiers check, USPS MO, Zelle or personal check after clearing. PM me for more details.

---

NLA

Bought off a forum member, but I never got to use it. Selling for what I paid for it - $200 shipped CONUS.

Thank you.

For sale is a AGT rail extender (260mm).
Good condition as shown.
$80 OBO shipped.
PayPal preferred
Message with any questions.

Looking for the internal piece from a 250mm Classic Leshiy. If you use a 350mm barrel, I assume you no longer use that piece. So if you have one laying around, let me know.

Got a custom .218 sized mag from Kelly, i checked all the chambers and they are .218 sized. I put it on my rifle but noticed that the barrel would need to be realigned to the magazine, it is slightly smaller than the mag I had on my rifle. So if you put it on your gun it will likely need to be realigned.

In the picture tye mag is filled with .218 sized 36gr H&N slugs

Selling for $150 shipped or Trade

SCOPE I have a couple of rifles needing high quality gloss scopes to match the gloss bluing. I'd like magnification of at least 9x and it needs to focus to 10 meters for silhouette. Leupold EFR, Bushnell trophy, Elite 4000, Burris RA 4-12 etc...

Hello up for sale is the FX Panthera 22 Cal 700 barrel comes with one factory magazine and two charm aftermarket magazines. Aftermarket KL hand guard. Shoots great just too long for me.

Asking $1,500
Reduced to $1,400 includes shipping

The only thing broken or not working is the one latch on the hard case shown in the picture.

Looking for ar stocks that at minimum have a cheek riser

As title says. Don’t really care if I take a hit. I want what I want. Lol

Let me know what you have and message for pics or info on the evol.

Also have brk Ranger xr in 22 would also trade plus cash.

Thanks for looking.

Anybody have a pathfinder in 177, or 22, that they would like to trade for something new? I have some top shelf airguns I'd trade for one.

I have a brand new never mounted Athlon Helos scope that Athlon sent me as a replacement for a unit my eyes were having issues with.
I ended up buying a different scope for the gun this was mounted on, so, I don't need this one just sitting on my shelf.
I'm asking $450 for it and I'll cover shipping.
EDIT: Forgot about payment methods. I don't support PayPal. Cashiers Check, Personal Check or Zelle are OK.
If you need other pics or have any questions, just PM me. Thanks.

You can read all the minute details on the scope at the Athlon site here:

Or here:

*** SOLD pending finance***

Up for sale is a gently used Hawke 8-25 Sidewinder Riflescope. The scope functions like new without a mark on it. It comes shipped and insured to lower 48 CONUS. It comes with all parts and accesories inclusing the scope case. Please see the pictures. The price is $200 shipped to your door.

I have been a member here for a long time and sold many items here in the classified. I never got a feedback posted until recently. My phone number is 703-99nine-491nine. Feel free to call or text, or PM me here.

Thanks for looking.

Eric






Optical Performance

• 8.5-25x zoom range
• 42mm objective lens
• Fully multi-coated optics: 18 anti-reflection layers
• 12.7-3.9' field of view at 100 yards

20x 1/2 Mil Dot Illuminated Reticle

• 2nd focal plane
• Etched-on-glass, fully illuminated
• Four short and hollow outer posts
• Inside edges of outer posts have minor bars spaced at 0.2 mil for ranging
• Thin crosshair with dots and bow-ties evenly spaced at 0.5 mil
• Red or green illumination
• 5 brightness settings

Use and Handling

• Fast-focus eyepiece
• Knurled high-torque rubber ring
• 1/4 MOA per click impact point correction
• 70 MOA windage and elevation ranges
• Side focus parallax correction: 10 yd to infinity
• Eye relief: 3.5"
• Exit pupil: 5.3 - 1.7mm

Compatibility with Hawke Ballistic Reticle Calculator (BRC)

• Downloadable free Hawke BRC software and mobile apps for Android / iOS / Windows allow you to:
  • Customize the reticle performance
  • Change Ballistic Coefficient (BC)
  • Change zero distances, muzzle velocity, and magnification
  • Plot your trajectory and find suitable aim points
  • Print trajectory graphs, reticle images, and range calculations

Construction Details

• 30mm one-piece maintube
• Lightweight aluminum housing
• Finger-operated capped turrets
• Side focus parallax correction
• High-torque eyepiece zoom ring
• Nitrogen-filled for water and fogproof performance
• Shock-resistant

Items Included​

• Hawke Sport Optics 8-25x42 Sidewinder Riflescope (20x 1/2 Mil Dot Illuminated Reticle)
• Pointer
• Lens Cloth
• CR2032 Battery
• 4" Side Wheel
• Ocular Lens Cover
• Objective Lens Cover
• 4" Screw-On Sunshade
• Limited Lifetime Warranty

Not Included​

• Essential Scope Rings

Additional Resources​

No additional resources available

New vintage Pellseat $30 shipped Zelle or Paypal F&F discreet no notes

Ux Notos with bottle mod with the real Huban dream Notes drop block 3-D printed LDC 3-D printed adjustable cheek height butt stock discovery 4-16-44 scope c88 Fx 500mm barrel and shroud and FX superior liner and 3 10 round mags and 7 12 round mags I get about 90 shots per 3500 psi fill pressure Looking to get $500 shipped lower 48

Brand New FX DRS Classic 600mm in .22 caliber.

The stock on this rifle was professionally stripped, hydro dipped (silver burled wood) and then the soft touch was applied. The stock work cost $325.

$1150 obo

This is a brand new rifle that outside of the factory test firing has never been loaded or shot. I have other accessories that I can add (scope, moderator, rails, etc..) if you want to put together a package deal. PayPal, Zelle, m.o., or check

sorry for the lighting in the pictures, I will get better pictures this weekend.

847.715.6944

I can make to order

Solid walnut WORKSTATION except for the threaded bolt which is 1.25", straight grained maple.

Features:

• 213.5"x8" x 8.5"
• 15 pounds
• Walnut is kiln drilled, 2" to 2" thick.
• Thick leather protects the firearm at all contact points
• Threaded wood bolt is made by yours truly and is bi-directionally adjustable
• Grip support is also adjustable horizontally
• Finish is 3 coats of Danish Oil
• Joinery is wood glue and 14 dowels

$200 TYD.

That's a Huben K1 in the workstation. It is designed for powder burner rifles, but it works just fine for air rifles.

I've made about 40 of these in the past year. (oak, cherry, and walnut). It takes me about a week to make these.

As far as I can tell these have been discontinued. 39.00 shipped CONUS

I'm getting a war warp. Wondering if there's anyone with parts for sale. Not sure what I need yet. Spare magazine. .30 conversion kit. Etc

This is a Benjamin Marauder pistol in a Crosman 2009 challenger stock fitted with a aftermarket LDC.

Shooting about 12fpe for 30 shots per fill or 3 full mags from a 2850psi fill and it's loves predator GTO lead free pellets. I put this together as a trainer rifle to use with my nephews and it worked phenomenally with the LOP being able to be adjusted down for youth and the easy to use bolt that they are familiar with. It also has the gen1 mrod adjustable trigger and spacer along with an upgraded RAW trigger blade which sets back a bit further from the factory trigger again aiding youth or small frame shooters.

The stock of course can easily be set for an adult as well and makes for a great barn pest, general use carbine.(36.5in Oak, 30in with the LDC off.)
Asking $400 shipped with 2 mags, or $475 with Hawke 4-12x40 Panorama scope and mounts.

600mm TJ (CrMoly steel) with a custom high flow 485 marine brass barrel inlet. This barrel is match grade. Had to buy 3-4 blanks before I hand selected this one for my personal collection. 14.02mm OD will work with the Impact, Maverick, Wildcat, Crown, etc.

Chambered / throated the lead in with a 2 deg live-piloted reamer that I had custom made by PTG for the TJ's .30 bore/groove. Shoots obscenely well with a variety of ammo. 1/2-20 thread on the muzzle, bore was lapped and polished over 3 separate sessions with a slight taper (a few ten thousandths of an inch). I'll include some high BC 62 grain Varmint Knockers with this one.

Terms: 399 + shipping CONUS. No lowballers. Price is as firm as the barrel.

Scope is in good condition with a couple minor blemishes.

$85 shipped (without scope mount)

$100 shipped (with scope mount)

Looking for a jam nut aka front end rest ( the one with the drill hole for tightening) FX barrel tensioner kit for FX Impact 22 cal.
Luis
[email protected]