I have a brand new hugget atom that's .177/.22 that I didn't get a chance to use. It's the 1/2"×20 version $100TYD. Thank you for looking.

2x Boyd's laminate stocks for gen1 marauders. $130 each shipped or $220 for both shipped conus only.

Please read entire ad prior to expressing interest or asking questions.

$375 shipped to lower 48 Paypal F&F or you pay the fees. Not interested in trades at this time....reasonable offers considered.

This one has been just sitting collecting dust, time to let someone else enjoy it.

1720t converted to accept .177 Mrod magazines, with the bottoms clearanced, much like the old skool method of converting a Prod to .177, prior to CARM and others making Prod mags in .177. The mag slot is sized for Mrod mag thickness, not Prod....it will include a few 12 shot magazines from an Umarex Origin, which fit perfectly.

gun will ship with what is seen here:



It is regulated with a Huma reg and the longer plenum offered by huma, with a reg setting around 110 bar IIRC. The valve has a peek poppet with 2mm stem and a cobra chamber. Hammer is an all peek lightweight hammer. This yields a very crisp, muted shot cycle. Currently tuned for in the neighborhood of 35-40 shots of JSB 10.3gr at 750fps. It is very accurate at this tune and ammo, 5 shot groups at 50 yards are very easy to keep under 1.5-2", even as small as an inch if the shooter does their part. A slight increase in HST will put velocity in the 775fps range.

The Rapid 70 stock kit has been modified to accept AK47 style or AR15 style grips. The stock accepts an AK47 pistol grip nut, as pictured an adapter is used to accept AR15 grips. IIRC it has a Hogue rubber grip. A shotgun rubber recoil pad was used to improve the ergonomics as I found the Rapid 70 kit to be very challenging to shoot as-delivered. However these mods are fully reversible to OEM Rapid-70 form. The Rapid-70 pistol grip and buttplate will be shipped with the gun.

The shroud end cap was replaced with a 1/2-20 threaded adapter.

Note the magazine slot was cut using an end mill in a drill press with cross slide vise. It is not perfect, but it is not rough either. Raw aluminum was painted over with a sharpie to knock off the shiny. Magazines are fully retained and do not fall out when cocking.

Please note I am not a professional tuner nor is my valve/hammer a work of art. However they are fully functional. Valves are fairly inexpensive if you want to convert back to an OEM valve. I am including the OEM hammer/striker assembly. IMO, unless you are wanting to turn the 1720t into a powerhouse, I would recommend sticking with the gun in its current state, it works quite well as configured.

I have tried to be as transparent as possible with the details of this gun. I do not recommend this gun being purchased by anyone who is not experienced at assembling/disassembling their own guns and replacing o-rings, etc. The Rapid 70 bullpup kit requires a bit of skill to take apart and put back together.

Feel free to reach out with questions.

Here are some misc pics.













Single shot tray can be installed if wanting to shoot without magazines.







A target shot from a full fill. Each group represents a full magazine, except for the bottom right 3 shots after falling off reg... Shot from 50 yards.

WTB: Steyr slip on silincer/moderator for a LG 110 Challenger HFT

Adjustable FX Impact mon-pod, came with a rile package a while back.
Never used.

Asking $40 Shipped CONUS.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Hard to find, silver edition Impact. Turn-key setup. Another amazing shooting and hard hitting rifle.
Brand new Covenant scope, 5-25x56 FFP + mounts (Original box and paper work can be provided if desired but will be shipped (and charged) separately)
4 pellet speed loaders
Holds air forever
600 mm barrel
Custom carbon fiber dipped shroud
Sabre Tactical extended Pic rail
DonnyFL KOI moderator
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1450 Shipped CONUS.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Want to trade Crosman 400 for Crosman 600. If interested will send pictures.

Hi Guys,

I have 2 Baikal SSP airguns for sale.

First is my IZH46 this is not the M and really does not need to be.
I have done a couple thing to the grip to work for me.
The grip has been stained for appearance and I have cut finger grooves into it with stippling.
It now fits the hand like a glove no more 2x4 feel to the grip.
Seals are in great shape, first shot last shot they are all consistent with no pump up over time.
Additionally I have a B line scope mount that will come with the pistol.
I used it for a simple TRS25 red dot that is not included.

Funny story this little pistol has earned the name Wasp slayer as I have used it to kill wasps from approx. 15+ yards on a regular basis.
It is accurate and is not finicky on pellets. Its favorite is 7.0 Meisterkugeln.

I am firm at $550 + actual shipping for the pistol, I do not need to sell it and love the gun.





NEXT!
This one is for the 10 meter rifle fan or a collector of RARE Airguns.
This is my MP532.
If you never heard of it you are not alone.
I was such a fan of my Izzie that I did a search one day of converting an Izzie to a rifle.
Much to my surprise Baikal already had.
The result the MP532, designed to be a competition 10 meter .177 SSP rifle.
It fills the bill easily on accuracy.
What this gun lacks in refinement it makes up for in performance.
I shot it over the chronograph tonight and straight off it shot a 481 fps with 7.0 meisters (also the favorite of this gun)
It followed it up with 479, 481, 483, 483, 478, 485, and 479 again. * shots extreme spread of 7 fps. At that point my battery
in the chrono went dead for the night.
But given that this is a single stroke pneumatic it could do this all day and night without fail.
I have added a Gheeman 530 1.5x diopter/iris. This is a huge improvement over the stock iris which was missing when I got the rifle.
This with a modification by the previous owner are the only 2 modifications to this rifle.
The previous owner sanded the rear comb to form a pocket in the cheek rest for perfect head placement time after time.
While I would have preferred it be completely stock, it works very well in getting that proper head placement.
It was a little rough sanded so I have since sanded it down smooth and added some coats of gun oil over it to blend it in with the rest of the stock.
I have not refinished or stippled the stock on this gun, I feel it is too rare to modify beyond what has already been done.
While the beauty (or not) of Russian laminate stocks are in the eye of the beholder, it is fantastically functional in placing the shot over and over again on target.

I am looking for $750 + actual shipping, which a approx 500 less than you would pay for an FWB601.
While there is no denying the refinement of the FWB, this should shoot right there with it and is significantly more RARE.

IF SOMEONE WANT THE PAIR I WILL DO $1100 Plus actual shipping.

Like new DonnyFl’s Leshiy 2 shroud fit both 250 & 350mm barrel. Has a standard 1/2 unf thread to use with your favorite moderator.
$40 shipped to USA only
PayPal F&F or add 4%


More information and videos available here at DonnyFl’s website.

$1300 shipped in CONUS. Taipan Veteran 2 in .25 cal. Scope and bipod are not included but can be negotiated if interested.

Gun shoots just like everyone talks about. Absolutely nothing wrong with it, holds air all day long. Shoots pellet on pellet.

Includes:
Taipan Veteran 2 in .25
Talon Tunes soft case
Original manual
2 magazines
All original accessories

I accept Paypal, Zelle or USPS MO (rifle ships once checks clear)

Thanks for looking!

$1300 Shipped in CONUS. I accept Paypal, Zelle or USPS MO (rifle will ship once checks clear)

FX Crown MKII in .25 cal with a 600mm barrel. Shoots great, 35 yard groups at 1/2" or less. No leaks or any other issues, it just works! Ordering a new gun and need to sell a few from the herd.
Includes:
FX Frown MKII .25 cal
1 original magazine
2 Orion magazines
Extended female fill adaptor
FX hard case

Thanks for looking!

Sold......

Saber tactical fx crown chassis. The new style one. $450 shipped usps priority with tracking, paypal friends and family or you add the fees on top.

WTT or WTS

I have a 5.5mm Taipan Veteran in overall very good condition and lazer accurate, with 2 x magazine,s, 3d printed mag holder, digital gauge and 3d printed cheek piece and donny fl silincer adaptor to 1/2 unf

Scope and Bipod not Incl

Would like to trade for one of the following rifles in .177

Taipan Veteran Standart
FX Dreamtac Compack.
Brocock Commander XR

If Trade for Taipan in .177 i wil keep the 3d printed cheek piece and mag holder

Selling for $950 if intrested
Shipped from Zip code 72320 buyer pays shipping

Precision metal apertures in 10 micron steps to determine head size of .35 pellets - 0.008" thick 304 stainless gage,

acrylic frame. Apertures from 9.01 to 9.10 mm (0.3547 to 0.3583 in), accurate to +/- 0.0025 mm

Never used. 20% off what I paid. $40.00 shipped.

Looking to buy .7L carbon fiber PCP air cylinder to an FX Impact M2. With or without valve.

FOUND.

***SOLD***Weihrauch 75 pistol .177, As NEW, great trigger and very accurate.

• Accurate match/target pistol
• Single-stroke pneumatic
• Dry-fire mechanism
• Recoilless
• Ambidextrous grip
• Checkered sport grip with thumbrest
• All-around training pistol with match accuracy

The HW75 can accept 11mm-14mm scope mounts/rings

$375.00 SHIPPED
.

As the title says I am looking for a 177 snipe 1/2×20 let me know what you have.

Hello AGN:

I have a pristine, as new condition Saber Tactical ST0047 FX Impact Arca 3 Compact Bottom Rail / Trigger Guard. This is the newest Impact trigger guard available from Saber Tactical; here is the info from the ST website:

PRODUCT DESCRIPTION
This rail has a full arca rail on the bottom for your compact FX Impact. It comes with an extended magnetic dust cap.
Features:

• Made of 6061 T6 Aluminum
• Black anodized
• Nylon tipped set screw to prevent rail from flexing against the bottle
• Overall length from trigger guard to the end is 11.25 inches
• M Lok slots on bottom and on the side for your go to accessories
• 1/4-20 threaded hole for camera tripod adapters
• Quick disconnect holes on both sides

My price here is $130 shipped.

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

All for $70 shipped. Bottom right I believe is a tungsten hammer weight. Regulator kit alone would run you $80.

Don’t want to sell separately.

***SOLD***.177 cal. HW 40 pistol, fiber optic sights, great trigger. This is a single stroke pistol. AS NEW
$190.00 SHIPPED

Not sure if there is any interest in this stuff, I certainly have no use for it any longer..... Perhaps someone is interested in revisiting the early days of PCP modding.

Please note this is not a set of parts that a novice can buy and just screw together a gun. If you've never built a custom gun on your own or you do not have an airgunsmith lined up to build you one with these parts, these are not something you want to buy.....

To the right person, $150 shipped to the lower 48 should be a bargain. Paypal F&F preferred.

A kit of sorts, to make a long barreled QB78. Due to tube length, at least a 25" barrel is required. You could always have the tube shortened/rethreaded, a simple job for a machinist.

36" long SS tube made by Don Cothran safe for 3k fills, Don even said up to 3500psi but I stayed at 3k....
Fill adapter, IIRC from a Disco.
Cothran Valve with longer stem for use in QB78

Consider the below parts as free to the buyer of those parts listed above. You may or may not find these suitable for your use.

QB78 breech previously used for a big bore. Modified with J slot to allow for bolt retraction and full bore porting. The bolt will push the projectile past the barrel port and retract info battery, leaving no probe in the airflow. Old bolt with .357 probe, IMO you should change the probe to fit your needs.
QB breech end cap, Crosman style tube cap, QB78 breech/trigger nut.

WTT:

I have a Vortex Venom FFP 5-25x56 to trade for a Nightvision scope or for a SFP Element Helix

Venom is in very good condition and comes with origenal boxed.

Let.me know what you have if intrested

as the title says, looking for a 580cc carbon bottle.
I do NOT need a valve, just the naked M18x1.5 bottle.
Let me know what you got!
Thanks.

Now $750 TYD!!
It comes with extra Vortex bubble and UTG QD rings ( the higher end ones on their website that retail around $80 or so). Bought in order to mount to my BRK pathfinder but decided to go with a red dot instead. $750 tyd.