I have an aluminum moderator, not sure the make. It works well on 25 and 30. Better on 30, it is just too big of an outlet for my 22s.
$45 shipped.

This is a custom made 3pc set for the Williams Aperture/Diopter Sight. This is NOT for the sight. The set includes a 1” extension, rubber eyeshade, and a iris reducer. The reducer has a 1/32” hole, as the the factory has a 3/32”. See both in pictures. It just presses in the existing aperture. The 3 piece set is $20 plus $7 shipping. Continental U.S Only. Just pm me if interested. Thank you.

As title says. Looking for either pp750 or pp700, preferably 22 but open to offers. Would like the folding stock on the pp700 if available. I figured I would try here first before ordering from overseas.

Would like to buy valve for airforce condor. Let me know what you have. Ty

DonnyFL Fatboy 2.0 with muzzle brake. I bought this in a lot and have never mounted it on a rifle, doesn't appear to have been used.

$175 shipped to lower 48, Paypal F&F preferred or add 3%. Not interested in trades.
















190

WTS Weihrauch HW100 Bullpup Carbine .22 cal. Purchased from Airguns of Arizona new by me on 05.29.2023. No adjustments or modifications to hammer spring, regulator or trigger. Shot less than 30 times. Tested a few pellets and shoots JSB 18.1 grain @ 725 fps ish, JSB 15.9 grain @ 740 fps ish and Predator GTO 11.75 grain @ 870 fps ish. Pellets were not weighed, lubed or sorted and barrel not cleaned.

Airguns of Arizona chronograph shows: JSB 18.1 grain @ 725 fps ish.

Item is mint and holds air. I have not done any long term or comprehensive accuracy or shots per fill testing.

Comes with factory box, papers, comes normally with two (2) 14 shot magazines but I am including a total of four (4) 14 shot factory magazines.

($1,589 for air rifle value if purchased new today + $80 for the two additional factory magazines = $1,669 total value).

$1,200 FIRM, PayPal’d and Shipped to lower 48, friends and family. Not looking for any trades. Only selling because I hardly shoot and any shooting I do I can do with my break barrel. Flawless feedback here under Serdac.

I bought the 450 9mm over the summer with intentions to hunt bigger game with it. While it packs a punch with heavy slugs it just doesn’t quite have the ft/lbs I need to do the job. Included with gun 2 mags, couple of pucks, fill probe etc. The only change I made was put in a regular fill gauge rather than the meazy. Just personal preference. It is like new. $2100 shipped.

In excellent condition, comes complete with black elastics to attach to barrel.

$125 Shipped to USA only. Paypal, Venmo, Cashapp. Will ship same day from NH

NOE Molds Specifications and Drawings for each bullet mold can be found on the NOE website.

All prices include shipping to lower 48

Feel free to make an offer on any single or combination of molds.

Payment via Paypal F&F or buyer pays fees

250-27-RF-CC3 2 cavity aluminum w/3 sets of skirt pins for 3 different weight pellets $100 Sold
300-68-FN-BI3 2 cavity brass with 3 sets of pins for deep, shallow hollow points and flat point $100
357-136-FN-BZ4 2 cavity aluminum $85 SOLD
359-174-FN-CE2 2 cavity aluminum $85
356-84-RF-CC5 4 cavity brass w/3 sets of skirt pins for 3 different pellet weights $125 SOLD
460-396-RF-AE2 4 cavity aluminum with 3 sets of pins for deep, shallow hollow points and flat point $100

Im going to PAC and will have this with me!

Have a gen2 Marauder i bought in the fall (Brand New, still have the box) for field target and ended up getting another rifle. This is a .177 with the Lothar Walthar barrel. Stupid accurate to where i was hitting a 1/4” steel target non stop at 50yd. Needs tuned now.
Only thing i did was carve out a small relief in the stock to access the transfer port like the factory should have. Its stock otherwise. Will ship in original box.
$490 delivered obo.
Would love to meet locally. Cincy OH but will ship too.
Includes 1 magazine.

No bipod
No scope or rings

Have the factory furniture from an airforce talon in decent condition $75 obo

As title says…if you’ve got the 350 box count that would be nice

looking for edgun leshiy 2 in .22 prefered. willing to check out .177 or .25. thanks in advance!

Hi! Selling my second Impact (М3) .22 cause I don’t need two airguns.
The gun has been purchased at Utah Airguns. Almost new, less than 300 projectiles through it. No any scratches, no leak.
It has custom built carbon fiber barrel with 500 mm Superior liner, DonnyFL moderator. The factory 600 mm barrel, shroud and moderator included. Adjusted and shoots accurately with JSB KnockOuts and JSB Redesigned. 2 mags.

Scope and mount are NOT included. (Or + 300$)
2300, shipping to conUS included.
Thanks for watching.

Brocock Ghost 3D printed Butt Hook with extensions and adjustable in Z direction

$45, PP F&F, otherwise add 3%

Andy

$35 shipped PayPal F&F.

Must specify Maverick or Wildcat/DreamTac please.

Andy

3D printed Butt Hook with extensions. I have the FX Wildcat Mk II/III and FX Impact/Maverick

FX Wildcat $45, PP F&F, otherwise add 3%

FX Impact/Maverick $50, PP F&F, otherwise add 3%

Andy

Please let me know if you have one of these Evanix Rainstorm 3D Bullpup that you would be willing to part with for some $$$, caliber .25 and up, preferably .357 but 25 and 30 is ok too. Thank you for your attention to my post .

Delete

Very good condition! This has been tuned by John Thomas including the installation of a Vortek HO kit. It’s generating right around 14-15 fpe. Probably 2,000 pellets since then...its just broken in. Includes the original box with all the original contents and a .177 Weihrauch moderator($100). There is also a 3d printed moderator/air stripper insert($15) in the muzzle brake. Included is also the self centering BKL-360 MB 30mm one piece mount($50+). Overall in great condition with a smooth shot cycle and reputed accuracy. It does have some small damage to the top of the dovetail rail...all can be covered by a one piece mount, however. $525 TYD in CONUS for everything...PP preferred, no trades please

The best springer money can buy at a great price with extras...don't miss this deal! Total value here is close to $1000

This kratos shoots great. Front of stock has been cut down, fx 300cc bottle added, was a .25 cal but converted to .22. Has a kral .22 barrel on it that has been professionally cut down to 10 inches, crowned and polished. It shoots cphp and fx atomic pellets great. Cocking lever was cut down and added a biathlon handle attached by a screw and apoxy. It does have dings, scratches and wear marks. This was set up for and used as a woods rifle, it’s not a show piece so please don’t expect that. Everything is solid, functions and shoots great. Comes with three 12 round .22 mags, two 10 round .25 cal mags, factory .25 barrel, and .25 probe. Moderator is not included but can be discussed. $450 shipped.

I'm looking for a used Sightron SIII Competition. Either the 36 or 45x45.

The title states it perfectly.

Crown MK1 laminate yellow stock 600mm extendable shroud shooting NSA 20.2 @ 950 good squirrel gun ppf&f $1250 shipped.

Crown MK1 laminate yellow stock 600mm extendable shroud shooting NSA 20.2 @ 950 good squirrel gun ppf&f $1250 shipped.