ONLY 20 TINS REMAIN. Picture shows 40 tins. 20 TINS have been sold.
20 Tins for sale by lot only
81.02 grains per pellet
100 pellets per tin

SELL BY:

Lot of 10 tins: $175.00 shipped ------- REDUCED TO $169.00 shipped -------- REDUCED AGAIN TO $165.00 shipped
Lot of 20 tins: $340.00 shipped ------- REDUCED TO $319.00 shipped -------- REDUCED AGAIN TO $315.00 shipped

Lot of 10 tins: REDUCED AGAIN TO $158.00 shipped
Lot of 20 tins: REDUCED AGAIN TO $300.00 shipped

American Air Arms Slayer 357. I resealed the entire rifle and went through it inside and out. It's a VERY easy rifle to work on! Much easier than the EVOLs IMO. Very well thought out design. It's just sexy to look at in person!

It has an adjustable balanced valve and to my surprise a self-retracting probe design for extremely efficient airflow. I don't have much .35 ammo, but I tested it with 68gn Griffin HP-DB slugs (1179FPS), 81gn JSBs (1150FPS), and 117gn cast ammo 1033FPS) from Hunter's Supply and it's a beast. Definitely sufficient for hogs, coyotes, and probably deer with heavier ammo.

This is NOT a toy pellet gun! It's more like a firearm in power. I'd keep it, but I already have my bases covered and with a stockpile of lead in other calibers.

It's in excellent condition, just some minors marks on the rail that I can touch up with BC Aluminum Black. No magazine included, but I can link you to them for purchase through a dealer who has them in stock.

Barrel is excellent. It uses a real tensioning system that's solid!

Stock is AWESOME! It's two-axis adjustable (pad goes up/down and it can extend or retract). The factory moderator baffles are aluminum (not the fragile 3DP that breaks on a second shot like the EVOLs).

Terms:
* $1725 shipped CONUS only where legal. Zelle (preferred)
* Not interested in trades

Hello everyone,

I removed the front sight from my T06 D48 and I cannot find it. Does anyone have one for sale?

It was plastic and the barrel has a wedge removed that the front sight would cinch onto. I may have the wrong wording but I hope that makes sense.

Please let me know.

Thank you,

Taso

NSA 0.257 caliber, 75 grains.
2 boxes 110 slugs - sell for $15.75 EACH shipped
1 box 91 slugs - sell for $13.05 shipped
(ALL NSA ABOVE FOR $40.50 shipped)

SENECA 0.257 caliber, 105 grains.
2 boxes 105 slugs - sell for $18.00 ea.
(BOTH BOXES FOR $35.10 shipped)

All the above (NSA and Seneca) for $72.00 shipped

Looking for those parts. Need plenum, valve rod, block, the valvetube end that attaches to the block where the trigger is, and anything else you might have left over. Looking to buy at a reasonable price

WTB FX hard shell 46 x 10 gun case - thanks!

Just removed off of my Western Sidewinder compact in order to use a bigger bottle. Like new and barely used comes with valve.

$225 $190shipped CONUS - PayPal F&F, Venmo, or Zelle

I have a New SB Tactical BTFA folding adapter this can be used on anything that uses AR type threads.
I bought two of these and used one, this has never been used, from what I can see these are out of stock or discontinued.

$100 Paypal F&F or add 4% includes shipping CONUS.

The DIY digital night vision rifle scope add on system is powered by 2X 18650 protected cell Lithium ion batteries, giving 8+ hours of runtime. It uses a CCTV camera attached into the housing to see through your scope. It has a ON/OFF switch on the 2X 18650 battery holder and a RCA video out jack, a CRT viewfinder for you to view your scope reticle and attaches to the rifle scope using a Pulsar Challenger DOS adapter. The unit requires a 850nm infrared illuminator to work, which is NOT included.
It also includes a LawMate PV-806 DVR for recording and playback. The DVR is from the well-respected brand LawMate. The PV-806 model is highly regarded and is a great addition to any surveillance setup. It is perfect for surveillance and includes all original accessories, SD card is required and is NOT included.
I used it for night rat pest control and predator hunting and it worked very well. Over 100 rats and a dozen or so predators didn't like it though. I used it on an Airforce Condor and an .223 without any issues. Idea came from Nightvisionforumuk. Selling due to I went thermal and just don't use it anymore. $125, Payment through PayPal F&F only.

I also have another DIY digital night vision unit for sale as well. This does NOT have a DVR or Pulsar Challenger DOS adapter with it, it attaches to the rifle scope using a rubber plumbing sleeve. It also works very well. $75 shipped, Payment through PayPal F&F only. Pictures of this unit are available upon request. It looks similar to the one in this add.

Anyone got anything for sale while on I'm vacation down here?

I am looking buy a Edgun Leshiy 2 350mm 22 barrel and magazine. Thank you

Sold......

Atlas Bipod BT65-LW17 CAL with Gray ops arca clamp, $ 250 shipped usps priority, paypal F/F or you add the fees on top

Talon p with .25 cal 12" carbon fiber sleeved barrel, vented bushing and maddog stock. Super sear 2 installed. Just add your talon or condor tank and valve.
Paypal, zelle or venmo
$275 shipped

A new unopened magazine for FX Crown, Maverick, Dreamline, & Wildcat MkIII Standard Side-Shot .22, 18 Rnds.

$40 shipped PPFF

If you want to trade a Leshiy 2 .22, I can pay the difference.

Pics soon to come or message me. Other bullpup trades or partial trades possible.

Have an updated (post 9/21) dreamline air tube from
.25/600 dreamline tac. Moved on up to the bottle rig. (Barrel band included)

Born on date 2023/09 it's in good shape.

Asking $130 (shipping included in price) any north or east metro Atlantans $110 delivered or meet up.

I'm looking for Korean PCPs, mainly lever action guns but will consider most of the other guns that aren't sold anymore/discontinued, rare, unique, or customized.

Anything worked on by Will Piatt aka Saddle Mountain Gunsmith is a plus.

-Sumatra 2500, Career II or III 707 CARBINE models
(Would consider full length rifles, but would have to be rare single tube version and/or tuned)

-Career Ultra 9mm

-Rare, discontinued, or unique Korean PCPs
(Eun Jin, Shinsung, Sam Yang, etc)
-Korean PCPs that were Will Piatt tuned, but more interested in the older/discontinued guns
-Some Evanix models

Just let me know what you have and we can go from there

I have positive feedback here and many on the old yellow forums BOI dating back to 2014, and Ebay too if you would like to see

Have an extra 480cc carbon fiber bottle with the newest M3 valve. This bottle will work with an Impact, Maverick, Crown, and some Dreamline setups.
It functions perfectly fine and holds air without any leaks, etc.
No issues, no dents, no scratches.


Same as buying new, which would cost $299+shipping+tax (sometimes)
Will take $210 shipped for it

I have a Vector Veyron brand new still in box (only taken out for pictures) that I never used or mounted. It's the 3-12x44 FFP model. These are the most compact and lightweight scopes you can find that are still of good quality. Only weighs 17oz and is 9.7" long. Parrallax focus down to 10yards. Locking turrets and pretty much every other feature you'd want in a scope. Comes with original box, manual, honeycomb shade, and scope covers.


Retail is $229 + shipping + taxes
I will let it go for $200 shipped

As above.
All are 25.39 grain
1000 JSB Redesign
700 FX

$80 shipped conus

PayPal.

Saber tactical shoulder rest. Free, just pay shipping.

WTS cash only. $240.00
No trades.
Funding stuff for my new truck.
I accept Paypal and ship with tracking USPS.

300bar 700 cc bottle with FX valve. Previously installed on my FX M3. Adult owned and in excellent condition.

WTS, no trades, funding parts for my new truck. Great condition. Adult owned. Great glass and clean.
I accept Paypal and ship with tracking number USPS. $490.00

NIGHTFORCE SHV 4-14x56mm Second Focal Plane (F2/SFP) 30mm Tube Durable Precise Waterproof Fogproof Hunting Gun Scope, Moar - 30 MOA Reticle​

Hello AGN denizens!

Up for sale today from a Leishy 2 I parted out:

Leishy .30 / 350mm barrel asking $175
Edgun aluminum new speed loader in .30 $160 [sold]
Edgun aluminum new speed loader in .22 $160 [sold]
3d printed used speed loader in .22 $50 [sold]
3d printed used speed loader in .30 $50 [sold]
3x .30 Edgun new magazines $70 each

I accept PayPal, CashApp and Bitcoin. Buyer will pay USPS flat rate shipping based on the size of the flat rate box necessary to ship. I ship same day, and with priority mail delivery is 2-3 days depending on where you live.

Thanks in advance,
Mark

If you are considering selling your Trijicon 5-50 Tenmile or Accupower, I would be interested. I prefer MOA, but would consider Mrad..Thanks. RK