got frount fx rail 14 inchs lo0ng for sale 50$ on it shiped and saber tasct bottle adapter

Listed on PrecisionSportairguns.com
[email protected]
5416473971
Reach out with any questions text is ok


Has cosmetic wear

functions with no issues

I disabled the problematic auto safety so that means you fully open the cocking lever pull trigger to set the sear close the lever and its ready to fire. safety is just manual now. meaning theres no warranty under airforce.

I freshly locktited in the breech screws that cause the dreaded wont cock failure so you dont have to go through that. Valve and bottle are brand new. I just replaced them as the original tank leaked. This one does not.

Has m18 moderator adapter which I had custom fit to the barrel since they normally do not fit.

Is missing 2 screws. one is the tank grub screw which does not matter with the tank nut locked down properly. the other is the front trigger assembly lower screw but the forgrip holds it on with zero problems so again I never cared to replace it. (hardware store)

Very nice scope in great condition. No scratches or marks. No box from MTC. Great price at 250.00 including shipping to CONUS. Call/text Ron 714-296-7489 PayPal FF Retail on sale goes for $620.00 I have a surplus of scopes so this one is gonna go. Call/text Ron 714-296-7489 https://www.airgunsofarizona.com/scopes/mtc-optics-viper-pro-3-18x50-scope/

This is the latest version of the EVOL .30 sporting the SUB MOA barrel, has the new externally adjustable regulator as well.

Is in as new condition from AOA, includes one magazine as well as the end cap adapter for a moderator.

Shooting the 44.75 variants right at 900.

I bought this when they were first announced and has been sitting boxed up since I received it from AOA.

Threw a scope on it last night and got a few shots in just to test and is all they say it is, absolutely phenomenal. I am just not a tactical guy so wanting this to go to a good home.

Scope, rings, Atlas bipod, moderator not included.

Trade for other PCP airguns in .30/.22

Someone should totally buy an FX Leopard in .22 cal with a 700mm barrel in the bottle configuration, use it for about 6 months-ish (or less), and then sell it to me …

This came with a 1.5L tank I bought recently, I only wanted the tank. New, never attached or filled it.

$50 shipped PayPal, Venmo, or Zelle.

Hello guys,

Selling a tuned Marauder pistol set up for right around 16 FPE average for 32 shots.

Fill pressure is 2950, end pressure is 1600psi.

Extremely hand pump friendly, super accurate factory barrel with custom shroud.

Trigger shoe, valve work, transfer port work, trigger adjustment new hammer spring and valve return spring.

700fps / 725fps \ 700fps is the tune.

Will come with two magazines.

Looking for $550 or trade for Zulus LRF 5-20

Contact me here, via text (nine16)531-2349

Or email: camsprecisionairguns(@)gmail.com

Wanting FX classic dream line stock in synthetic or possibly would please call Bill 208-870-8216. Thanks.

HOLOSUN HS510C & HM3X Combo, Circle/ Red Dot

Selling for $400.00!
Amazon and other internet selling for $485.00 plus tax.

Sold Gun, excellent condition. Just used once to sight in gun.

Sorry, no trades.
Paypal F.F. Please.
Free Shipping to CONUSA



HOLOSUN HS510C & HM3X Combo Multi-Reticle Circle Dot Open Reflex Sight w/3x Flip-to-Side Magnifier 510C-HM3X
The HS510C is a versatile open reflex optic designed for long gun applications. HS510C is at home on carbines, PCCs, and shotguns due its durable design. HS510C features and aluminum housing with titanium hood for added shock resilience and includes a QD absolute co-witness mount (1.41” dot height).

HS510C is packed with Holosun innovation including Solar Failsafe, Shake Awake, MRS (Multi-Reticle System), Red Super LED with up to 50k hour battery life, with 10 daylight and 2 night vision compatible intensity settings. A lower 1/3 co-witness spacer is available separately from Holosun dealers that increases the dot height to 1.63”.

I’m looking for a stock for my 8002 BLACK HUNTER. The rubber type coating has started to blister and come off. I sanded the paint off and the stock underneath is beech. Beech is fine for this type stock since it was coated but I would rather have figured walnut, laminate or even an aluminum chassis. Let me know what’s out there please.
Anschutz NA says that the 8002 will drop right into a 9015 stock. Anybody have one of these?

I have a like new Steyr LP50 large right handed grip I would like to trade for an XL. Thanks

Looking for matador r5

Do you remember during the pandemic when you couldn’t buy basic necessities… like 700mm barrel kits? I certainly do.

I built this .30 cal 600mm barrel to compete with the powder burners (.22LR) at bench rest. It is a STX Superior liner with a carbon fiber sleeve and a carbon fiber shroud. The carbon shroud originally had an integrated tuner on it, but the 600mm barrel was short enough that the large bottle on my Impact interfered with the tuner, so I swapped the business ends of the two shrouds. The barrel works great. But once the 700mm kits finally became available again, I upgraded.

This listing is for:
1- FX Impact STX Superior .30cal/600mm Barrel Kit w/pellet probe.
1 - FX integrated harmonic barrel tuner (on stock aluminum shroud)
1 - FX carbon fiber liner sleeve (installed)
1 - STX Superior heavy liner .30cal/600mm



All This would be over $600 if purchased new.
I’ll sell it for $300 shipped (USPS continental US).

I have a collection of extra .177 and .22 single shot loaders (flip out) Made by
PRS and CARM

they fit the following .177 or .22 airguns:

Alphawolf Or Deltawolf or Ghost

Send me a PM if you are in need.
I will make you a sweet deal.
I may have extra's in other calibers too but prob not many.

picture of Redwolf ssl’s
picture of wolf or ghost .22 ssl mags



picture of ghost or wolf SSL mags

4 Issues of the Airgun Revue by Tom Gaylord all in good condition. $39 or best offer plus shipping

Hi Airgun Nation. I'm NO longer looking for a pre-owned AGT Netvor. I ended up purchasing new one from Talon Tunes directly.

Guys beware, I was contacted by a scammer and they used pictures posted here and from the internet to make me bite. I knew it was a scam since the pictures are from a team mates rifle..lol.
Do NOT purchase anything from "James" phone number 712-524-9193

2 in working order .25 side shot mags
$50 plus shipping
just sitting collecting dust
pay pal preffered

Hello everyone,

Today I am selling a HIGHLY sought after, Western Sidewinder S Compact in .25. I bought it from a fellow AGN member and after a few days of shooting it, I realized this gun isn't for me. There is nothing wrong with the air gun. However, when I received this, I did load the magazine and shoot it. It did clip the moderator (0DB) which per the previous owner is the stock moderator for the Sidewinder. I ended up taking it off and using my STO Sarissa which made it a lot more quiet (Backyard and Basement friendly ). The previous owner (Not his fault, but mine for not asking) did not mention some details but I would like to include it in this post below. I will also mention what's included in the package deal. NO SCOPE, NO SCOPE MOUNTS, AND NO BUBBLE LEVEL.

$1549 shipped CONUS. PayPal F&F. If you want to add insurance, let me know and I can add insurance at YOUR cost.
Trade: FX M4 Compact .22, feel free to send me trade offers

Western Sidewinder S Compact .25
300CC Omega CF bottle (On the gun)
One 15 shot magazine
3D printed sides to make the Sidewinder less skeletonized. However, there are still tiny strands in the "MLOK" holes from 3D printing that can be snipped and cleaned out to give it a cleaner look. I'm not sure if you can attach things to the "MLOK" holes.
3D printed cheek rest (OEM cheek rest included)
3D printed extended butt pad with bottom picatinny rail (OEM butt pad included)
3D printed (I think it's an arca rail) picatinny to arca rail adapter (Bottom picatinny is damaged. See photos)
3D printed foster fill port cap (Has to be fully removed to fill)
3D printed air gauge covers (Front at the CF bottle, rear & on the side of the stock, and one on the power wheel)
FX Grip (No OEM grip)
Shroud added by previous owner (I think the previous owner said it was a FX shroud that he cut)
Adapter for the shroud end of the barrel added which adds a 1/2 X 20 UNF thread so you can use any moderator with 1/2 X 20 UNF.
0DB Moderator (Clipped with my first shot. Re-tested, shoots fine with the 0DB moderator.)

50 yards 5 shot group pictures below using JTS Dead Center 23.59gr. Not all perfect groups but decent groups.

I think that's all. If there's anything else, I will edit this post.
AGAIN, $1549 shipped CONUS. Paypal F&F. If you want to add insurance, let me know and I can add insurance at YOUR cost.
NO SCOPE, NO SCOPE MOUNTS, AND NO BUBBLE LEVEL. Message me if you have any questions.
No trades at this time.

Raw 177 bench Martin replaced o rings rifle holds air forever includes 10 tins of exact monster 13.43 gr. And 5 tins of exact 16.20gr.
Don’t laugh at the scope it works well Rifle,15 tins of pellets and custom scope $ 1500.00. I will split cost of shipping
I am no longer shooting pellets other aids coming shortly I will post a .25 and a .30 both raws

SPF to barenger! This is my Beeman Weihrauch HW77 in .20. It was manufactured 1986 and has the older 25mm piston, which is a smoother shooting rifle than the newer 26mm piston equipped ones. Price is $525, plus $25 shipping obo. Payment by USPS money order, or cashiers check. PayPal is accepted but as friends and family only.

Daystate Wolverine Forester HP R .25 Cal. $1500

Comes with:

1. 2 Daystate Magazines
2. 1 Daystate Single Shot Tray
3. Convenient, soft, pull string felt pouch to conveniently store your mags and SST
4. DonnyFL Sumo

Bought from a fellow member last summer ( 2024 ). Beautiful rifle and extremely accurate. I prefer my 25cal bullpups so this rifle deserves a new home.
Scope and bipod not included.






The following images are from the previous owner.

My last two personal FX barrel adapters for the Taipan Veteran. These work with the FX factory barrwl housings. I fabricated these from domestically sourced marine brass to just under press fit dimensions with internal o-rings / grooves.

One is deep and the other is shallow, but they both work excellent. Each includes a precision cut / precision thickness Delrin shim that wraps around the section of the barrel that goes in the forward support. This makes up the extra 1mm barrel OD needed for the housing clamp and they dramatically reduce barrel harmonics!

Terms:
* $110/ea shipped CONUS only. Zelle preferred or PayPal with 3% fees

These are excellent high BC long range rebated boat tail slugs from Griffin Airgun Ammo. They work well with a variety of FX liners, CZ barrels, and TJs that I've tested. G1 BC ranges from 0.15 to 0.163 in various barrels that I have shot them from (excellent in FX and CZ barrels).

Here's what I have to sell:

40gn .217 RBT Slugs

• (17) 200ct packs - 3400 slugs total

Retail: $26.50 per 200ct ($450.50 + shipping)
Terms:

• $325 shipped for all or
• $17.50/200ct pack (min 2) and split shipping

40gn .218 RBT Slugs

• (12) 200ct packs - 2400 slugs total

Retail: $26.50 per 200ct ($318 + shipping)

Terms:

• $235 shipped for all or
• $17.50/200ct pack (min 3) and split shipping

Nielsen Specialty Ammo 24.8 grain swaged slugs .217.

These are 350 count boxes, NSA sells them now in 250 count boxes for $16.99/box

• (13) Boxes of 350

Terms:

• $15/box (min 2 boxes) and split shipping
• $190 shipped CONUS for all 13 boxes or