Hello,

I'm selling my like-new Thomas .177 field target rifle. This is the 18" barrel version, not the carbine. The following is included; the scope is optional.

1. Like-new Thomas .177 field target rifle
2. MDT attached sling and Anschutz front sling mount
3. Multiple air-strippers included (Steyr in picture)
4. Rowan hamster

Price: $3,300 OBO, Shipping included within USA. With the Kahles K1050i FT (silver): $4,500

Optional scope: $2,000 (Price new - $3,400)

Both items have been well-maintained and are in like-new condition.

Regards,

Steve

Only used this bottle a few times. Resealed it about a month ago and replaced the gauge with a 315bar Wika. Added an AGT fill whip, which gives it a second valve that makes it easier to fill rilfes with. Has a Foster's QD on the end.

Terms: $230 + 1/2 shipping CONUS

As the title says. Let me know what you have.

Thanks.

3 items for sale first is arcra rail long one 14 inch long 8 holes next is a saber tact drop bottol block and last is a kit to move bottle to frount with block off plug i have no need for them no pict but i got saber tact drop bottle adapter also

I have a newer 4-16X44 Mil Element Helix Scope that I got the end of last year. Only mounted once but didn’t fit my needs.
$325 OBO shipped to your door. Paypal F&F preferred.

I might be addicted to steel targets from @ShootingTargets7. Hoping to sell off some of my steel targets cuz I'm always buying more from him haha

Nothing wrong with them at all!! The range is always evolving so target selection evolves as well.

These are in brand new condition. They are AR500 and will last basically forever .



These are designed to be hung from 3/4" pipe ( EMT ) but, of course, you can hang them any creative way you want.

Looking to buy an AAA Evol/Slayer Barrel Removal Tool.

Thanks,

Jerry

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell an FX Impact M3 Standard 0.22 600mm in black w/ FX high capacity Side-Shot magazine, FX moderator, Magpul MOE-K2+ grip, stainless steel bolts installed, FX extended foster fitting, and factory FX hard case. This is the latest iteration of the M3 with the Power Block and front barrel clamp; the barrel has dual transfer ports (P for pellets & S for slugs) and has the latest STX Superior pellet liner inside. This awesome rifle is currently set up to shoot 18.13g JSB's at 915-920fps with great consistency and accuracy. First reg is set to 150 bar, second reg at 100bar, power wheel is at 8, Quick Tune adjuster is at 3, and valve adjust is at about 3.5 bars - at this setting, the rifle is very quiet with the included factory FX moderator. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. All of the original black screws will be included as well if you want to reinstall those instead.

This rifle is in excellent condition, holds air perfectly and shoots extremely well. This was my personal rifle for the last year or so and it has served me very well whenever I needed it. It wasn't shot much but was always reliable and accurate whenever a ground squirrel popped up in the backyard. The left and right side plates by the butt stock and shroud have been wrapped in an automotive grade carbon fiber wrap (the rear plates were previously cerakoted in a distressed red/black color). The original grip was upgraded to the Magpul beavertail AR grip in stealth gray. The only thing to point out on this rifle is that the tiny little factory FX grub screw that holds the pellet probe in the carrier is stripped. FX loctites this tiny little grub screw at the factory so it's very difficult to remove without stripping the screw so if you plan on replacing the pellet probe or doing a barrel caliber change, you'll need to figure out how to get this stripped screw out before doing so. Other than that, this rifle is rock solid and ready to go! The only reason I'm selling this rifle is because my M4 finally arrived.

Price is: $1500 + 1/2 shipping within the continental US (scope and mounts not included in the selling price...)

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

Hello all Impact M4, M3, MkII, X & MkI owners:

I stopped selling these FX Impact stainless steel bolt sets awhile ago but since the release of the M4, several members have contacted me about getting a set for their new rifle - so I've brought them back and have updated the kits to include the latest M4 model!!! These kits will replace pretty much all of the visible screws (and also some of the partially hidden ones like the ones on the scope rail and guiding plate) on the Impact MkI, X, MkII, M3 and M4. These stainless steel bolts will wear better and won't rust over time; it's also an inexpensive way to add a nice bit of flash and contrast to the rifle.

Each kit will come with the bolts separated in labeled bags, anti-seize compound and a spreadsheet with installation notes. The schematic and parts list for each model can be found here:

M4: https://fxairguns.com/wp-content/uploads/2024/10/F11262-Impact-M4.pdf

M3: https://fxairguns.com/wp-content/uploads/2021/04/F10370-Impact-M3-1.pdf

MkI / MkII: https://fxairguns.com/wp-content/uploads/2019/02/impact-181129.pdf


Here is a sample list of the included screws/bolts:

• Adjustable scope picatinny rail (M4)
• Front scope rail socket head cap screw (M3 and older models)
• Rear scope rail socket head cap screws (M3 and older models)
• Cheek rest socket head cap screws
• Guiding plate (the plate beneath the scope rail and cheek rest) socket head cap screws
• Cocking bolt socket head cap screw
• Pellet probe grub screw
• Trigger guard socket head cap screws
• Trigger block / power plenum socket head cap screw
• Sprint holder (the plate to the left of the power wheel) countersunk screws
• Power adjuster wheel countersunk screw
• Grip socket head cap screw
• Barrel locking grub screw
• Regulator gauge plate socket head cap screws
• Left & right rear plate socket head cap screws

Price: $50 shipped

Here are some photos of the stainless steel bolts installed on my various Impacts over the last few years:

Hello AGN:

Looking to sell some custom OEM & Saber Tactical upgrade accessories for the FX Impact. These parts were professionally cerakoted in what is called "distressed red/black," where they're cerakoted twice - first in red than black on top. They're then hand sanded to expose the red cerakote in some areas simulating a unique worn look. This multi-step process is time consuming and costs more than the normal one step cerakoting. The rubber Hogue grip was hydro-dipped to match.

These parts were on my Impact M3 and all of the parts will fit any Impact up to the M3; they'll also fit the new M4 model as well with the exception of the TRS rail. Last two photos below show what the parts look like installed on my M3 600mm Standard for reference (obviously rifle, scope, and other parts shown are not included in sale price).

-Saber Tactical Top Rail Support (TRS) Standard ST0045 ($250)
-Saber Tactical Arca Rail 2 ST0022 ($160)
-Saber Tactical Ambidextrous Cheek Rest ST0054 ($35)
-Hogue AR grip ($30)
-OEM FX cocking bolt ($30)
-OEM FX 600mm shroud ($75)

Price for everything listed is $550 shipped and FIRM because just the parts alone cost over $600 after tax and you're getting about $300-$400 worth of cerakoting for free.

New GK1 V3 25cal. Shorty pistol. Includes the factory hard case, spare orings and factory parts kit. $1550.00

NLA

Nice clean just rebuild by me Benjamin Disco .177 cal with adjustable power. Nice Boyd's right hand Laminate stock, Bushnell High Contrast 3X9, 7" silencer.

$300.00 plus shipping. USPS Postal Money Order or Pay Pal plus 3.5%. [email protected] 503-706-9512

Mint condition. Little use. PP G&S. Shipping with signature confirmation only. $550 Shipping/Fees included.

Gun has been super reliable and accurate for me. Has superior liner installed bit factory liner is included. Comes with hard case, 3 .25 mags, speedloader for .25, Huma transfer port / probe parts, saber tactical cheek riser, 3d printed rear butt that actually work really well, and a .22 Maverick barrel with heavy liner with impact probe, .22 magazine. The only mark is where the valve adjuster was unknowingly hitting the shroud when turning but has no affect on function or operation. Going to another platform so everything goes. Feel free to ask any questions can send more pics upon request. Price is $1400 shipped obo buyer pays fees. Paypal, postal MO or zelle.

$3000 obo Includes Element scope + 2-35 cal barrels, 700mm and 800mm and a 30 cal barrel 700mm. All with tensioned barrel kits with Superior H liners. Fx Chronograph, Yokozuna suppressor. All in excellent condition. Has Tungsten Hammer. No leaks. Many spare parts. 2-35 cal mags and 4-30 cal. mags. Buyer pays frt. about $100. I have close to 5k into this rifle. Note, It has the "Direct Bypass" because 1st reg leaked. I have the replacement reg if you want to install but it's not necessary.

Hey fellas looking for a bnib or very excellent condition FWB 300 mini or junior. Let me know if you have one that would be great. Thanks.
Up

.22 or .25 only, any stock.

So, this rifle has been sitting for a while, and it has held air just fine. When the magazine is empty, it cycles the shots, no problem. But for whatever reason when the magazines is full, it will shoot, but it will not cycle to the next round. I'm not entirely sure what's up with that.

$850 shipped

Want to SELL OR TRADE: Used Benjamin Rogue .357 / 9mm high power air rifle with electronic trigger system. This is a rare & discontinued ePCP rifle. Includes 2 mags (one used and one as new), original box, and a bag of new replacement seals from Crossman. The gun does have a slow leak, and DOES some scuffing & scratches and I'll be happy to send detailed photos to anyone serious. I would be interested in trading for FX airguns, or possibly Daystate, Vulcan, AGN, or other quality guns. We can add $ either way to make a fair deal. I have more photos I can send to serious people, and can take any additional photos requested. I was on the old yellow BOI, and I have 4000+ ebay positive feedback. I can rebuild it & fix the leak, but you can expect $400 increase in price. Price Reduced AGAIN = $850 +s/h

FOR SALE OR TRADE: Evanix MAX-ML .25 Bullpup Silver-Gray/Black metal chassis with AR forward grip & 2 mags. Very nice condition, but it has a very slow leak so you'll need to top it off periodically or have it re-sealed. Price REDUCED to $575 or may trade for a FX, Vulcan, Brocock, or Daystate air rifle .22 or .177. I can accept a personal check, money order, or paypal friends&family gift payment. I am on the old yellow forum, and also on ebay with over 4000 positive ebay feedbacks. I can take any special photos requested so you will know I have the gun in hand and I am not a scammer.

Custom Walther Reign UXT MK2 .22 - Made in Germany

I bought this bullpup thinking it was cool, but I fell out of love with it because of some problems, mostly the ineffective moderator, so I removed the OEM moderator, and lathe threaded it properly 1/2"x20tpi. Then the barrel throat & crown were rough, so I lathe polished them. Then it was blowing out pressure from the "system case" (a polymer secondary receiver that transfers the air from the valve to the barrel), so I fabricated a binding support to remedy this issue (this is a design flaw, not an issue with only my Reign). I also smoothed the action & trigger pull very nicely. And after all of that, I decided I didn't like the gun that much. It has only about >50 pellets through it.

I can sell this gun (with OEM box, 1 mag, fill probe, etc) for $425 and YOU supply a shipping label, or $475 shipped CONUS.

Or I can include the custom made Neil Clague moderator (works well) for $175 additional (extra long tail to fit snugly on the Walther threads).

I can also include the new Bushnell 4-12x AO scope for an additional $100 (will focus down to 10 yards).

Prices are FIRM, but trades may be considered (FX, Daystate, Brocock, AGN).

Offered and sold AS-IS. No returns or complaints. Yes it holds air perfectly.

I have more photos I can send to serious people, + I can take any additional photos requested. I was on the old yellow BOI, and I have 4000+ ebay positive feedback.

Looking to sell my hatsan Flash-R, this is the regulated hatsan flash that came out recently and comes with or without cvlife bipod and Red Dot. I'll also include a tin of Apollo pellets, they shoot very well out of this gun just as good as jts and close to as good as jsb. I have the box, orginal fill probe, an aftermarket quick disconnect fill probe, everything from orginal purchase from hatsan. I have a 3x9x32 baraska scope if preferred over red dot. No leaks and still shoots great, pic of accuracy at 45yards is at the bottom. Ive put roughly 1500 rounds through it only thing that broke was the pressure gauge, it isnt in the right place so I marked where 3600psi is on gauge. I watch my compressor gauge when filling it now. It's very easy to replace.
I'll be fixing gauge next week and price will go up $10 when I do.
$150
$130 without bipod and optic
Shipping not included avg. is $25

I will send buyer a video with their AGN name in it and me shooting hatsan flash-r before payment if requested.

If any questions please feel free to ask

Edgun Leshly 2 Long in .30 Caliber as a complete package
Price: $2,200 ( Price Reduced )
Scope: Blackhound Genesis FFP
300 CC Bottle
EaZy Fill Trigger QD Foster Fitting
REPR Adjustment tool, Edgun Leshiy2 Extended Picatinny Rail & (2) magazines
Fatboy by DonnyFL
Gun Case
Shipping is extra
Payment Methods: Apple Pay, Zelle, Venmo

Willing to trade my .22 barra 250z veil camo. For a .25 barra 250z. Its about a month old from pyramid air. Has rouge trigger kit.