Excellent in the wind for target and hunting. I have 5 tins (175ct).

$60 shipped TYD

Selling my excellent condition Huben K1. 2020 model. It has a Huma reg and is currently tuned to shoot JSB Hades 26 grain at 910fps, very accurately. Holds air forever, absolutely no leaks. Will ship FedEx ground to prevent pressure changes. Will include original reg as well as fill port. It has a quick load gate but I will include the original as well. Will also include moderator adapter for 1/2-20 thread. This rifle is amazing it just no longer suits my needs. Asking $1200 shipped. Will take PayPal if you pay the fees, or f&f. Will also take other methods.
Feel free to offer trades, or partial trades
.22 or .25 only
Would be interested in-
Katran
BRK commander or pathfinder
AGT vixen short

Up for grabs is my winning Western Airguns Bushbuck .45

100% Made in the USA!

This rifle has only been used in Big Bore competitions at RMAC and EBR. Will make an excellent hunting rifle or use it to win!

It is in excellent condition and recently resealed. No Leaks!
The rifle came in first place in RMAC a few years ago and 2nd place at EBR in 2024 by me.

Tuned to shoot the 260gr slugs at 850 FPS ACCURATELY!

I selling as a package but if you just want the rifle, I may consider it.

Package deal at $2500 with Free Shipping!
Will accept Zelle, (Friends) PayPal, cash in person, etc.

Included in the Package..
Bushbuck .45
Bipod Picatinny Rail
Element Optics Nexus 60-20X50 FFP
FX Adjustable Scope Rings
Bubble Level
Ammo - 360gr Perigrine Slugs
Hard Case

Bellow is some info about the rifle..

The Bushbuck 45 caliber is built from a very rigid platform to provide the highest power and maximum shots per charge, with the highest level of accuracy. The solid one piece receiver and picatinny scope rail is milled from aircraft grade aluminum with a low scope mounting position for proper scope to eye alignment and proper cheek weld on the stock. The Bushbuck's air cylinder is an all steel unit that provides rigidity and an anchor for the 452 high quality, accurate barrel with a special twist rate to stabilize short and long bullets in flight. The Bushbuck has been accuracy tested to 250 yards with amazing results. The extra long 400 plus grain bullets give especially tight groups. The 285cc air tube provides two full power 600+ ft/lb on high and four 400 ft/lb shots on low with fill pressure of 4500 psi (High) & 3000 psi (Low). Cocking and loading the rifle is done simultaneously with ample space for the extra long bullets. The trigger is a very solid unit that breaks very clean at around 3 lbs. This fine rifle sports a high quality US made stock in laminate as standard. The stock comes with laser engraved stippling on the pistol grip and for end that add to the visual appeal of this fine rifle and include dual sling studs in the fore end for bipod and carry sling. The new Bushbuck 45 will handle any North American and most non-dangerous African game as well as compete in long range target events at the highest levels. Best of all, the Bushbuck 45 is 100% Made in the USA!

I have a 20 cal RX1 commemorative edition rifle for sale. I am the original owner and bought it from Robert Beaman directly. I can email you more detailed pictures as needed.

The RX1 was outfitted with the blue ribbon scope at time of purchase. They added the block-off plate to cover the original sites. It has an optional silencer (basically a grip). And finally they added some optional bushings in the stock pivots. This also includes the 20th anniversary case with special logo. The only thing missing is at one time there was lens caps with elastic strings for scope. I have not seen them in years so that will not be included in the sale. I believe I have an original Beaman leather pellet bag to go with it.

This is an exceptionally nice piece.

I have a good friend who is an FFL, and he can help me get the rifle boxed and shipped to you.

I will take PayPal or a certified check. Price is $1,000 plus buyer pays shipping cost of their choice. I am in Des Moines Iowa and local pickup is encouraged if you are in driving distance..

New Handguard for the Umarex Notos designed by Bravo3d. 7 Mlok slots with one on the bottom. Quick and easy install. Its a one peace design so you just heat it up with a blow dryer and slide it over the tube.

$39 + shipping.
If you would like to learn more please check out

Umarex Air Sabre holds air like a whale.
Arrows and extra woodswalker stock included. No scope.
I got this as part of a bundle deal and I doubt I'll ever use it.
I am in the Atlanta area.
Thanks for looking.

BSA Scorpion SE .177 Syn, with HUMA regulator and XTX Shroud. Currently tuned for 11.5fpe with AA 10.3gr pellets for WFTF field target. Also shoots phenomenally at 20fpe for open class. And whisper quiet, it holds the record on my family farm for shooting 5 pigeons in succession from a rafter before the rest flew off from them falling and confusion. They were completely undisturbed, it's that quiet.
Includes 1 mag, single shot loader and fill probe. Asking $420 shipped conus
It's not mint, been well used for hunting and FT for years but has never let me down.



Over the years this has been my list finicky no questions asked just deliver exceptional accuracy every time I pick it up rifle.
Only selling due to our furnace going out and the family van engine dying all at once.

I have 2 used but in great condition .25 cal seneca aspen magazines. $25 each or all for $40 ship within US only
You can also find this on my ebay msg me for the link.

Ok folks,

I am in need (strong word, more like want) of a benchrest gun for a newbie in 75/100 yard benchrest shooting......

I am open, but prefer it to be a higher-powered .22 or .30 (not ruling out .25 but just not a caliber I shoot much so not as much ammo on hand).

Prefer something that is set up out of the box, ready to go, and does not need a bunch of tuning, etc.

This will be for a "smaller" shooter, but being a benchrest gun, weight, etc., is not an issue.

Right now, I have one of my guns on loan, but I want to get something that will be just his so he can put his stamp on it.

Let me know....

PayPal for pmt.

I bought this pistol used from AoA last year. Was helping a friend who was looking for a tool to dispatch vermin caught in traps. He went with something much larger (BinTac T9), so I played with this pistol making it into a mini-carbine. But truth be told, I prefer shooting my recently purchased .22 Mordax, and I really don't much shoot PCP Pistols. So the Weihrauch is up for sale.

Last time over the chrony was shooting JSB 13.43's best, at an average of 746 fps (and nice and accurate on my 25 yard range). And I put in my notes "refill after 2 mags."

Recently I decided to play the mini-carbine game with this gun, so I bought some hardware and a Buck Rail quick release carbon fiber stock. Was a fun little project which was easily accomplished using some of the accumulated knowledge of AGN members. So this gun is usable as a pistol or as a mini-carbine (for more accuracy longer range). The rear iron sight (included) had to be removed to attach the stock, but IIRC it is one screw to re-attach. The whole stock mount is quickly and easily removable by loosening 3 screws (shown by arrows in the photo below).

Comes with 2 OEM magazines, a single shot tray, fill probe, the removed rear sight and the components shown to make it a mini-carbine.

Does NOT come with the Vector Optics Veyron 3-12x44 FFP compact scope nor the mounting rings. But this mounted scope could be included for an additional $105 above the gun's listed price. NOTE: This is a normal eye-relief RIFLE scope, NOT a long eye relief pistol scope. So it is only good for use in the mini-carbine configuration.

Price as shown (minus scope and rings) is $715 paid via PP Friends & Family, shipping included WITHIN the CONUS.

First "I'll take it" wins.

Thanks,
Tom

*** SOLD ***

I have found that I don't shoot PCP pistols as much as I thought I would, so I am putting my .25 cal GK1 V3 up for sale. I originally bought this Derrick Wall tuned pistol off the AGN Classifieds here:

https://www.airgunnation.com/threads/25-cal-huben-gk1-version-3-tuned-by-derick-wall.1310612/

This gun has not been tuned or adjusted since I bought it (I don't mess with Derrick Wall tunes as I am quite sure that he has already forgotten more than I will ever know about airguns). Less than 100 rounds through it in my hands. The only 'change' I made was to put a red paint dot on the normally un-marked frame, to show with more specificity where the 'red is dead' position of the safety lever is.

The only blemish I see on this gun is a slight press mark on the grip, shown in a close up photo below. No known issues with the gun.

Price is $985 via PP Friends & Family, which includes shipping within CONUS.

First "I'll take it" wins.

Thanks,
Tom

EDIT 4/25: Answering a question I've now received twice - so others may want to know as well. The gun was tuned for 33.95's and shoots them at an average of 827 fps. With 25.39 MRDs - those fly at 885 fps. From a pistol!

Digging through my old airgun parts totes and found a couple cases or NIB Mrod mags both individuals and 4 pack cases.

Asking $10 apiece plus $5 shipping or $40 shipped for the case.

I have:
4, .25 cal mags
available

Hello,

Selling my AEA SF Compact in .25 caliber for $500 FIRM. The air gun is less than 9 months old. I bought it from The Pellet Shop. I've probably only had 500 pellets go through the AEA SF. There are cosmetic blemishes and scratches on it from me tightening things. Only modification was changing the end cap to have the 1/2x20 UNF so I can put on a moderator. Other than that no changes, it is exactly the same from when I got it from The Pellet Shop. Fires great. I've only fired JSB Hades .25 26.54gr. The only thing that I have noticed is, it is missing the pic rail/attachment under the air tank. Never had that from the start. Comes with 2 fill probes with extra o-rings, 5 magazines, and the OEM end cap if you do not need the 1/2x20 UNF end cap.

I will not ship to out of the United States, Hawaii, Alaska, and Porto Rico. If your state does not allow for air guns, please to do attempt to buy and follow your state regulations. Paypal F&F or if you prefer goods and services, you'll pay the additional fee.

As the title suggests I’m looking to pick up a used Shoebox in the Central Ohio area. Looking to do a face to face so wanted to stay closer to home but will entertain other offers. PM me here with info and asking price. Thanks!

Up for sale is a FX Impact M2 with the 700mm .25cal barrel. It is a great rifle and in great shape. I have never had any issues with it. I put it away in the fall after the last time I went out shooting woodchucks and the pressure gauge was right where I left it.

The accuracy is fantastic as you would expect out of an Impact. It has taken woodchucks from 10-100 yards. We used this rifle for accuracy testing of the Benjamin Match Grade 27.9g pellets. It shot them almost as well as the JSBs at 30 and 50 yards.

It is tuned to run JSB 34g pellets at 910-915fps.

I have added a carbon fiber barrel sleeve (not glued) and a Saber Tactical rail with both ARCA and Pic. Otherwise, it is stock.

Asking $1450 OBO shipped. Scope not included.

Thanks,
John

Let me know what you have, I prefer .177, .22, and .30

Used Airforce Condor SS in .25 cal with the Blue frame. Currently shooting 34gr pellets @ 920fps for ~64fpe while still being impressively quiet for the power. In great condition with a few marks but in good working order. Asking $415 shipped CONUS.

*** SOLD *** GX-E-CS2 Compressor, Compressor is in very good condition and functioning properly, will be shipped in factory carton and packing. $145+shipping - PayPal Friends & Family, (if PayPal Goods & Services add $6.00 to cover fees), or USPS Money Order. - Trades or partial trades possible, send a picture of what you have to trade. I do not want breakbarrels

*** SOLD *** Inch Pound Torque Screwdriver Kit, perfect for optic installations, compressor servicing plus many other airgun and precision uses. $35.00 shipped. - PayPal Friends & Family, (if PayPal Goods & Services add $2.00 to cover fees), or USPS Money Order. - Trades or partial trades possible, send a picture of what you have to trade. I do not want breakbarrels.

*** SOLD *** Alsafe 700cc Carbon Fiber Bottle with FX Impact Valve , this is a new and unused setup. $160.00 shipped - PayPal Friends & Family, (if PayPal Goods & Services add $6.00 to cover fees), or USPS Money Order. - Trades or partial trades possible, send a picture of what you have to trade. I do not want breakbarrels.

D65 stock (T would be REALLY nice) in some sort of restorable or usable condition.

Hey Folks -

I'm looking for one or two Mordax/Sidewinder .22 magazines.

Hit me up!

Thanks,
Mark

I have seen this little pistol priced from 350 to 500 bucks, Its used not a mark on it like new , Shot maybe 25 times , I took the safety switch out, Stupid design , I pull the trigger while taking the safety off once., So I just took the safety out,,, I also took the base plate off the bottom of the grip, Two screws and it goes back on , I'll put it back on before shipping or you can , I am a PCP guy I guess, This year I just bought a Alkin compressor and two great white tanks, Yep add that up,,, 200,00 bucks and I will ship it to any lower 48, I take Pay Pal Just P M me for phone # more pictures or anything else ,,

I will be keeping my fill probe (I bought it new). You’ll be receiving the plug for under the rifle.

Bought this at Wally World last month, but it ain’t my cup of tea…less than 50 pellets through it… $100 and you have to pick it up near Sonora Ca……I will NOT ship…