If you have one for sale let me know.

As the title states I am looking for a uragan .177 compact. Please let me know what you have. I have always liked them and the plan is a low power tune and hear the Gen1's did great.

Looking for a valve only. I have an extra bottle sitting around so I figure I might as well set it up.

This guy needs a new operator. Used in fair condition
AirMaks Katran X Folding Stock w/ 600mm unchoked CZ barrel, aftermarket trigger, bagrider/monopod, 500cc carbon bottle, arca rail, keymod handguard, 50cc plenum, sub12-45ft lbs capable.
Will have stock FX grip not the ergo. Good condition but shows signs of wear, no leaks.
800$

**SOLD**

I've got 2 each Daystate old style magazines for sale (they don't have the opening door) which were originally used in a Red Wolf, .22 cal. These have the lever in the bottom which activates turning of the mag via a pin at the base of the gun's breech.

Both work just fine. One has the pewter colored wheel and one has the black colored inner wheel. Both standard 10 shot capacity.

$45 each shipped (CONUS) or $85 for both. I only have PayPal as far as electronic payments go (and would appreciate F&F payment).

Thanks,
Tom

For sale is my Taipan Veteran Long in .22 caliber with red laminate stock. This was a standby backyard varmint rifle so it didn't see very much use. Total shots through it is 1459 according to my logs. It has never been out in the field as all of the shots were made either from shooting out of a window or indoors on a chronograph.

This gun has performed flawlessly with my time with it. Never had a leak. The stock regulator is set to around 145 bars and I have never adjusted this. I stored the gun at 125 bar fill pressure when not in use.

This sale will also come with the DonnyFL Koi (0.177/0.22 model) moderator. I used this moderator threaded directly on the barrel with the stock barrel shroud removed. This is how I recommend you do it as ideally, you would need a size up bigger moderator if you are attaching it to the shroud. You will also need to buy the proper adapter to do that.

This sale comes with everything the gun came with when I received it from Talon Tunes. It will also come with the 3D printed cheekpiece that I bought for it. You will need a double sided tape to install it on the receiver.

Please note that this does not come with the steel dowels to adjust the brass hammer spring tension. I didn't get those from Talon Tunes when I bought the gun and at the time, I didn't realized that they were supposed to be included. I've always just used two 3mm allen bits to adjust the hammer spring tension.

Accessories included as listed (if it is not in this list, please do not assume it is included); 2 magazines, single shot tray, fill probe with bolt-on male quick disconnect. Two metal dowels used to unscrew the cap at the end of the moderator, two pieces of 3D printed cheekpiece that needs double sided tape to install, DonnyFL Koi 0.177/0.22 moderator with cone endcap, serialized instructions manual with a test sheet from Talon Tunes.

Please note that there is a slight ding on grip part of the laminate stock. Please see photo. This is how it came to me from Talon Tunes. Other than this, the gun looks very clean overall with no marks or scratches. Please be aware that although the gun is in perfect condition, the nature of the finishing of the anodization is not perfect from the factory. They are all like that. The finish on the metal is not the very shiny type as seen on something like the Air Arms TX200.

$1065 $950 (or $889 $875 without the DonnyFL Koi) shipped to continental USA. PayPal or Venmo payment. I am in North GA and can meet up in a safe place for transaction.

I understand that I don't have feedback on this forum yet. I sold a gun here a few years ago. I am CarnivoreGreens on eBay with 1000+ feedback on there. For validation of my selling reputation, you can send me a message over there and I will reply back to confirm.

Thank you for looking.

Gun is in great condition comes with upgraded Huma regulator, 300cc bottle and carbon fiber handguard, you can pick either .22 cal or .25 cal barrel and magazine. Donny FL moderator included. Asking $1800 shipped.

5 boxes 90$ $85. I will cover shipping.
These fit hubens.
3 box of 38 gr =600 slugs
2 box of 33 gr =400 slugs

Only selling since I need cash and won't have a pcp for months. Works good on the gk1's I had to sell. (Since I originally bought 10 boxes, I did open each of these to make sure selling you full, not partial box)
Zelle or PayPal

Let me know what you got

Nice scope in great condition includes rings but not in box. No scratches or dings. 175.00 shipped to CONUS PayPal FF Call/text Ron 714296-7489

Hi everyone - Up for sale is my near-mint condition .30 AGT Uragan rifle.

I've included lots of photos, but am happy to take more and/or videos for any serious buyer, just let me know.

• Asking $1,100 $1,000 shipped to CONUS lower 48 only.
• Originally purchased from and tuned by Charlie Frear of Georgia Airguns (please see his test groupings below).
• Less than 5 full mags shot with it. Yep, I said 5.
• Includes AGT soft case, user manual, 2 mags, fill probe/whip, Crown Saver, AGT pen, and AGT keychain.
• Also included is an open tin of JSB Exact .30 Diabolo pellets. I didn't count total pellets remaining, but guessing 85%+ left (see photo)
• Practically new, incredibly accurate and well-built. Hoping it goes to a good home and sees lots of use.

Important

1. Don't hesitate to ask questions! I will do my best to answer all of them.
2. Payment via PayPal only. F&F preferred.
3. Shipping IS included in the price, but will only ship to CONUS lower 48 states. Signature required.
4. Sorry, no trades.

Here's a lightly -- and lovingly -- used Cometa 400 Fenix USC Star in .177 that needs a new home. It's a lovely carbine and nicely accurate. If I weren't preparing to move to another state, I wouldn't let it go. Got from Keystone --great dealer! Extremely light handling marks and an odd scratch on the left side above the trigger guard. I have no idea how it got there. Asking $250 shipped insured.

bought and sold my jet 2
however i do have a brand new barrel and barrel cover both new in the box $50
takes it

Black AirMarksman FX Impact Backbone Rail Short – 30 MOA
bought this for my impact m3, comes with hardware.
$220 shipped

Have a AirMarksman Anvil Rail for a impact m3 ended going a different route. 220 shipped.

This is a very nice clear scope. Push button illustration. Completely tool less turrets. Looks like new. Rings not included. $1550 shipped

Hi All,

Looking for a 700mm .30 FX Impact. This will be a 100 yard pellet shooter only so does not need to be the latest and greatest super high power slug fest gun.

Open to any model (MK1,2,3) and looking for mostly a “base” gun only without a ton of extra accessories etc. not a deal breaker but I know how all the add ons can add up!

Appreciate it!

New, sourced from Ernest Rowe complete with oring. Direct fitment to Kalibrgun Crickets 1st generation. Can also be used for AGT Vulcan II with very little machine work. View attachment 489017View attachment 489018$50.00. Accepting U.S. Postal Money Order.

Thank you

Looking for 2 bottles with valves for a dual setup for a gun. Don't care if they're the aluminum or carbon fiber, just need 2 of the same size.

380cc preferred maybe a little bigger but definitely not wanting the 580 or 700cc.

Lemme know thanks!

$110 TYD PP NET TO ME
One of the very best simple to use scope rings and with the highest standards of materiel 34mm X 37mm high
There is no marks in like new condition, comes with paperwork and original box, I'm the original owner
I have perfect feedback so buy with confidence

The PSR™ scope rings series is compatible with any 1913 or NATO rail and features ScopeLink™ interfaces situated on the caps that allow the mounting of multiple optical accessories.
In this latest generation this series sees improved reliability under stress conditions and the addition of a recoil lug, a bubble level, a new one-screw clamping system which speeds up the assembly.
– Lightweight and durable scope rings
– ScopeLink™ interface for attaching multiple optical accessories
– Compatible with any 1913 or NATO rail
– Manufactured from 7075-T651 aluminium
– Finished with Type 3 Hardcoat anodizing (MIL-A-8625 TYPE 3)

They don't make them like they used to. Palm swell and sharp lines. Been in storage for 20 years. Never used it, and in great condition. Didn't know I had an extra stock for an R-1. Determined that I'll never use it since I have custom R-1 stocks still in the box. Has hole for sling swivel stud. No trades, third party, or international sales. Ship weight: 5lb, 6oz. Shipping dimensions: 35" x 9" x 4". Buyer pays actual UPS ground (Pirate Ship) rates. Paypal FF/Venmo/Zelle/Walmart2Walmart or PP G&S (+3.3%). Asking $175 + shipping.

The gun is in excellent condition i purchased it back in march of this year asking $1450 shipped OBO.

85$ OBO good condition shipped free Comes with dovetail mount rings original box papers and cleaning cloth

Gen 2 pro model (Newest latest model). Lots of features. Standard 1/8 BPSS threads for most ag manufacturers. Like new, functions as it should. I prefer stock mechanical gauge. Comes with Usb charge cord. Dont have original box or manual. Was $106 new. Asking $80 shipped. I can take zelle, venmo, paypal.

I make these as a retired hobbyist (wildlife biologist). They are designed for rifle maintenance, adjustments, and display. Features:

• Solid wood
• Extremely adjustable
• Heavy leather padding
• Hand-made , double rail sliding wooden butt support screw
• Sliding grip support
• Joints are combination of dowels, large screws, and wood glue
• 24x9x8
• Finished with multiple coats of Tung Oil

I ship quick and secure. I've bought and sold many times here on AGN.


Walnut cradle with Taipan Veteran 2 Standard .25 700mm


Oak - $125 Includes Shipping



Lighter Finished Oak - $125 Includes Shipping


Walnut - 2" Thick - 100% Dowel Joinery - $150 includes Shipping