FX Boss with synthetic stock in great condition….Upgraded to a 480 carbon fiber bottle so much lighter than the old bottle style and has the lower pic rail installed for your bipod.

Has a Huma reg installed and is shooting the 44.75 lights out right at 880.

Comes with one magazine and DonnyFL adapter

Scope, rings, bipod, not included

I am in the 900.00 range on it but am open to offers and can split the shipping.

*** SOLD *** Selling one of my Accu-Tac FC-4 G2 Bipod Picatinny Bi-Pods. This was only used for 100-yard benchrest competition and practice. Very minor wear aside from the contact points of the picatinny clamping mount. Not much more to say... one of the best bipods you can buy. I moved to shooting benchrest with a larger table-top tripod for the extra weight on the bench, so I no longer need two of these bipods. Price is $295 shipped and insured to your door. Continental US only. Payment via PayPal Friends & Family.

Hi All,

Picked this up over the weekend not realizing I had purchased another .25 (instead of .22) so parting with this one.

Is in great shape and has been tuned by Derrick Wall for the JSB 33.95 right at 900 FPS.

Shoots like a laser and comes with a total of 8 magazines and fill probe.

Scope, rings, bipod, moderator not included.

Say 850.00 and we can split the shipping (OBO)

*** SOLD ***

Selling my complete LabRadar Chronograph package. Includes the following:

1) LabRadar Chronograph (FW-A: 2.0.0 / FW-B 2.0.0 / HW: 1.3.0).
2) Table stand with adjustable ball socket head.
3) Stainless Steel sighting tube.
4) Airgun microphone trigger with mounting bracket and extra foam cover.
5) 20000 m/Ah external power brick w/cable.
6) Three SD cards for data storage
7) Soft-sided LabRadar carry case.

I have never had a problem catching and tracking any airgun pellets I've tried to chronograph. Price is $300 shipped & insured to your door. Continental US only. Payment via PayPal Friends & Family.

I have both brand new .22 and .25 cal. Can do scopes and suppressors or just the gun only.
NEW LOWERED PRICE $340 shipped ea in lower 48. These are quite a bit better than some other entry level rifles of similar price range. I have an airgun store at a local level that isn't doing well locally because of lack of interest and I about at a point where I can no longer even feed my family so a sale would be appreciated.

Good condition comes with original stuff as shown $100shipped.

Hi All,

Picked this up over the weekend not realizing I had purchased another .25 (instead of .22) so parting with this one.

Is in great shape and has been tuned by Derrick Wall for the JSB 33.95 right at 900 FPS.

Shoots like a laser and comes with a total of 8 magazines and fill probe.

Scope, rings, bipod, moderator not included.

Open to trades so just let me know what you have….

Hey Guys

I have a set of 30mm No Limits rings so you can adjust your MOA
if you shooting with a dovetail rail.

This are in really nice condition just down to one gun that has dovetail so not needing them.

Looking for $50 plus shipping CONUS

*NOT willing to part out*
*NO trades*
Impact has normal wear and tear, look at pictures. Panthera is BNIB only fired to sight in.

FX Impact Compact .25 Cal - $2,500 OBO (price includes shipping)
-Element Helix HDLR 2-16
-No Limit scope mounts
-Saber Tactical TRS Compact
-Saber Tactical picatinny rail
-Saber Tactical butt stock
-DonnyFL Sumo

FX Panthera Compact .30 Cal - $2,000 OBO (price includes shipping)
-Element Immersive 5-30
-DonnyFL Yokozuna

Accepting PayPal F&F, PayPal G&S (you cover costs), Zelle

I've got a PhoneSkope/FireFly 8SE recording package up for sale. Just not using it much anymore. Everything you need to start recording. The photos attached were taken yesterday, 11/17/24. The camera works perfectly. Has a 64GB micro-SD card, many accessories, two batteries and the charger for those. You will need a cable though, which is one of the very common types.

The PhoneSkope attachment is very solid on my Impact. It can be removed and replaced with zero misalignment. The scope attachment ring is a 30mm. I have modified the front of the clear plastic cover for easier access and better cooling. Not seen, but I have modified the back side round shaped piece for easier access to the power button. The camera housing has a square male shoulder on the back side that presses into the round base's female square slot as a friction hold. I have put at touch of glue on that to hold it in place but could use a little more if preferred.
Asking $150 shipped for all. PPF&F works for me. Let me know if you have any questions, via PM

Looking to sell my M3 .22 or .30 $1700.

Reximex Meta .177 like new with 2 mags, slugs and hard case. Scope and bipod not included.

Just recently acquired this Benjamin model 87 Centennial. I guess these are quite rare. This one is also in the rarest caliber, 177. It has no serial number. Are far as I can tell through my research, it’s the only one to date that is in the 177 caliber with no serial number. It’s been used. Some handling marks on the wood. Most to tiny to get a picture of. The brass coating has some wear. It is solid and has a beautiful Walnut stock.

I JUST purchased this from a fellow forum member with an idea for a project. But decided on a different project. So I'm listing it again for a bit less.

Essentially NOS in box with everything that came with it. There are a few small marks on the left side of the cylinder down by the action that look like they may be some very small surface rust freckles. This was the side of the gun that was on the underside while being stored in the box for the last couple of years.

Shoots fine, holds air, nothing of note except what's above, and that takes close up pics and direct lighting to see.

Asking $300 OBO shipped in the CONUS. Prefer PayPal friends and family, or add 4% to cover fees.

Email me tobinwebster at yahoo dot com

Thanks!

I’m looking to sell my optisan 3-12. Works great no issues besides scratching on left side of scope. See pics for details. I had it on my leshiy 2 before upgrading to an element nexus.

$200 OBO shipped in original box with Wheeler high scope rings.

Thank you.

Hello, I had a rear stock bust in shipping does anyone have a spare rear along with a bolt don't care the color or material. Need the bolt going though it also as it got slightly bent.

Looking for an older compact and quiet bullpup in .22 (or perhaps .177 if the deal is right), like a Taipan or a Cricket.

Up for sale is an FX Dreamline with Field Target Stock,
Walther ergonomic hand grip, tunned up by Manolo Gonzalez from Puerto Rico.
Upgraded Gehmann buttpad, single shot tray and magazine, (brand new)
Element Helix 6/24x50 with magnetic oversize paralax wheel.
Muzzle break, hamster, counterweight.
Brand new plenum not installed.
80 consistent shots per charge at 890fps with a extreme spread of 3 fps.

Has been my training rifle for my last 2 years of competition, 3/4 inch at 55 yards all day long.
Spotless gun ready for a new home.

Asking $1700 shipped and insured to CONUS only.
Paypal FF or add 3%
Contact at [email protected] or call or text to 561 260 2014

Debating selling or trading my delta wolf. It has a custom 19” LW barrel that shoots both pellets and slugs great with a custom carbon fiber shroud and moderator, it’s extremely quiet. It’s currently shooting hades pellets at 950 fps, easily shoots under an inch at 100 yards. No issues with this gun, shoots and functions amazing. Being that this is a custom barrel, it does not have the built in chronograph, so that is the only function that does not work on the gun and is currently turned off, unless you put a factory barrel on it. Comes with 2 batteries, 2 mags, hard case, butt hook attachment, arca rail, and some misc. parts. Not in a hurry to sell. $2000 shipped east of the Mississippi, or trade for a 640 thermal scope, i can add cash if needed, no ATN scopes. Thanks for looking.

I am Looking for Jaeger rifle. I have FX Maverick .25 600 mm in great condition (set to shoot 45 grain slugs at about 950 fps).

RTI P3 in .177. Bought from Tony @ Talon Tunes August 6th of this year. Had a faulty Reg but the guys @ RTI quickly took care of the issue and sent me an updated one. Zero issues since! If you've seen any of my other guns, I usually don't hold onto them too long. Buy, play, sale and repeat. That's the cycle, unless I say other wise. The gun runs great. I bought the plenum extensions and barrel removal tool cause I had plans on going up to a .30 cal. I recently took them off since there was no added benefit, only hurting my SD and Spread. In the picture the Reg is set just under 100 bar. It is now set just above, (@102 bars I would guess.) in the chrony numbers PDF. $1300 shipped. Thank you!!



















View attachment AEA 137 gr Plenum Removal-Nov_2024.pdf

I have a Macavity Arms 25 cal. Long ( production model).
I bought it from Pyramyd maybe 3-4 months back.
I have only run about 3 mags through it and it stands up to the 1 moa at 50 yards claim.
I never did push it out much farther except to do a bit of plinking, not grouping.
Anyway, my personal inventory is getting too high and I would like to let it go to someone who might be looking for a Christmas present or maybe just another addition to their inventory. LoL!!!
I would like to get $365 for it including shipping.
I prefer PayPal, but I'm sure I could be flexible if you prefer some other means of payment. The box contains all of the original accessories including buffer tube wrench and o-ring replacement kit. I have also included the original invoice from Pyramyd.

Selling a LIKE NEW Blackhound Genesis 4-14x44 scope. First focal plane scope with illuminated MIL reticle. I had it mounted for a short period and decided I needed more magnification so I am selling the scope and it comes with all accessories and manual in the original box. Asking $200.00 and split the shipping costs. Paypal F&F preferred.

I have two of these so I'm going to sell one of them. Will come with two mags, box, manual, and a fill probe.
Holds air indefinitely...no leaks. The one for sale is without moderator and regulator. Btw regulator didn't make much dif for me probably bad unit. This has the heavy spring & can be filled to 4500psi whixh also makes a kinda hard to cock bolt. Only things i did to this airgun are a dif oring inside the gauge cap so it can't pop off whe some tape on bolt handle to help with cocking effort.
Aea bullpup 32" barrel is quite accurate with most pellets and slugs.
This is airgun feels like a real firearm when shooting. Only bad thing is the trigger pull, but im sure someone on this forum can fix that for a fair $


$260 +shipping PayPal preferred

Looking for a backpacker 1377 or any custom 1377

Thank you