I don’t know if this is the right place, but I am trying to find the best place to market guns and equipment that Thomas T had prior to his passing. I am just looking for some direction if anyone has ideas or thoughts. Trying to make sure they end up in a good home. Thanks in advance for any assistance on this. I appreciate it.

9 tins of .22 cal Gamo Rocket pellets, $40.00 Shipped...



PayPal preferred...

(2) Bipods F/S--- Cvlife 6"adjustable to 9"" Second one Caldwell 9" adjustable to 13" Both as NEW

$40.00 FOR BOTH SHIPPED

TRUGLO Sight Line Compact Green Laser NEW in package---- (sells for $170.00)-----
$135.00 NOW $100.00 Shipped

$$$ REDUCED $$$​

Diana Spring loaded Scope mount Dovetail to Picatinny, 30mm rings with inserts to make it 1" rings
(sells for $85.00 On PA) Designed for springers as a recoil scope saver.
$40.00 SHIPPED AS NEW

$$$ REDUCED $$$Carbon Fiber tube Bipod extension Fits picatinny/Weaver (bipod NOT included)
$30.00 SHIPPED

Weihrauch HW30,
Bugbuster Scope.
and a great Bulldog Bag.

$325 shipped conus
PayPal FF or + 3%

For Sale: $12 per tin. Local or match pickup strongly preferred, or you pay USPS shipping.

.25cal JSB pellets

• 1.5 tins 300ct Exact King Heavy Diabolo MKII 33.95gr

I’m looking for someone using TPU filament to make a cover for a Zeiss Victory Z-Point or Hensoldt RSA-S red dot since the factory ones are long gone.
Thanks

75 shipped obo. Fits V1 Huben GK1. Including punch tools to replace trigger made by rustic industrial customs

WTB a shroud for a 600mm barrel to fit on a Maverick

Please let me know what you have.

Wil only buy from AGN members with positive feedback.

Thankz.....

Text is good;
806 566 7190

Trying to downsize my stuff...
Had this booster for quite a while but never got around to giving it attention. It's an industrial 1 to 50 booster so with 100 psi in, makes 5000 psi out. I found some specs a good while back that says it's capable of 0.5L per minute which is fairly serious in my book. It leaks in some of the fittings but seems to function.
I'm not trying to make money here... just want it out of my way. I'm offering it for the cost of shipping plus maybe a good sandwich in exchange for packing it up ... so $20 plus the shipping
Thanks for looking ...
Bob

Up for sale is a Hawke Vantage scope, 3 x 9 x 40 a/o. It is in like-new condition and came off my 6 foot-pound Beeman R7. That recoil was almost nothing, and the scope has not more than a couple hundred shots on it. I am not aware of any markings or defects that should be noted. The Hawke box is torn on one end but otherwise functional. The box includes everything that comes with the scope. Asking $100 shipped. Prefer PayPal and add 4% if not Friends and Family. For another $10, I will include the four-screw Accushot rings with a stop pin.

$25 shipped.

Selling this Scott SCBA valve , threaded 7/8 - 14 UNF ( fits American tanks ; 30 , 45 , and 60 minute capacity). This will NOT fit Asian or European tanks ( M-18 - 1.5) ! If you have a tank with a problematic valve , either leaky or difficult to open or close , this is an economical remedy . Also included is a wrench tight fill set with a new 2" gauge as well as a male foster fitting , for filling the tank. You would use your hose with female fosters at each end to charge your air gun . Included with the valve is the original o-ring as well as a new one. Selling for $75 including tracked shipping to the conus only. Not interested in trades or offers at this time . Please deal by pm . This is listed on other sites as well. Thanks for looking............Herb

Selling Hawke 4-12 Airmax scope is in good shape, it does have a few dings on the scope caps . $180.00 Shipped or delivered to the Columbus Air gun show tomorrow.

3 boxes of 13gr. Zan slugs(1200ct) plus about 1/2 bag! $50.00 Shipped...

PayPal preferred...

Harldy used $30 shipped.

I have a .22 vixen long that I got from a trade its a great setup but not for me. Looking for something else. Honestly nothing really specific so let me know what you have and we work it out. It will come will some pellets as well the other grip and the mag holder. I am willing to sell as well for $1000TYD

Sold my Royale 400.
One is brand new, the other original with the rifle but lightly used.
Both fully functional.
These also fit the FX Independence 22 and the verminator.

$95 or best offer
shipped conus.

This one is not a safe queen, but is very nice, and will make an awesome hunter! It has a brand new TBT maxi pro kit and a new Vortek VAC seal and Vortek breach seal. 18FPE and no joke to cock! Eat your Wheaties and smash squirrels!

Happy to FaceTime for a full inspection. It has a few marks, but cycles great. I took it in needing seals. I already have one, and I don't shoot .22 springers much these days.

Most typical payment methods are accepted. 450 now 400 shipped in the continental U.S.

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell an FX Impact M3 Standard 0.22 600mm in black w/ FX high capacity Side-Shot magazine, FX moderator, Magpul MOE-K2+ grip, stainless steel bolts installed, FX extended foster fitting, and factory FX hard case. This is the latest iteration of the M3 with the Power Block and front barrel clamp; the barrel has dual transfer ports (P for pellets & S for slugs) and has the latest STX Superior pellet liner inside. This awesome rifle is currently set up to shoot 18.13g JSB's at 915-920fps with great consistency and accuracy. First reg is set to 150 bar, second reg at 100bar, power wheel is at 8, Quick Tune adjuster is at 3, and valve adjust is at about 3.5 bars - at this setting, the rifle is very quiet with the included factory FX moderator. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. All of the original black screws will be included as well if you want to reinstall those instead.

This rifle is in excellent condition, holds air perfectly and shoots extremely well. This was my personal rifle for the last year or so and it has served me very well whenever I needed it. It wasn't shot much but was always reliable and accurate whenever a ground squirrel popped up in the backyard. The left and right side plates by the butt stock and shroud have been wrapped in an automotive grade carbon fiber wrap (the rear plates were previously cerakoted in a distressed red/black color). The original grip was upgraded to the Magpul beavertail AR grip in stealth gray. The only thing to point out on this rifle is that the tiny little factory FX grub screw that holds the pellet probe in the carrier is stripped. FX loctites this tiny little grub screw at the factory so it's very difficult to remove without stripping the screw so if you plan on replacing the pellet probe or doing a barrel caliber change, you'll need to figure out how to get this stripped screw out before doing so. Other than that, this rifle is rock solid and ready to go! The only reason I'm selling this rifle is because my M4 finally arrived.

Price is: $1500 + 1/2 shipping within the continental US (scope and mounts not included in the selling price...)

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

Hello AGN:

Looking to sell some custom OEM & Saber Tactical upgrade accessories for the FX Impact. These parts were professionally cerakoted in what is called "distressed red/black," where they're cerakoted twice - first in red than black on top. They're then hand sanded to expose the red cerakote in some areas simulating a unique worn look. This multi-step process is time consuming and costs more than the normal one step cerakoting. The rubber Hogue grip was hydro-dipped to match.

These parts were on my Impact M3 and all of the parts will fit any Impact up to the M3; they'll also fit the new M4 model as well with the exception of the TRS rail. Last two photos below show what the parts look like installed on my M3 600mm Standard for reference (obviously rifle, scope, and other parts shown are not included in sale price).

-Saber Tactical Top Rail Support (TRS) Standard ST0045 ($250)
-Saber Tactical Arca Rail 2 ST0022 ($160)
-Saber Tactical Ambidextrous Cheek Rest ST0054 ($35)
-Hogue AR grip ($30)
-OEM FX cocking bolt ($30)
-OEM FX 600mm shroud ($75)

Price for everything listed is $550 shipped and FIRM because just the parts alone cost over $600 after tax and you're getting about $300-$400 worth of cerakoting for free.

Hello all Impact M4, M3, MkII, X & MkI owners:

I stopped selling these FX Impact stainless steel bolt sets awhile ago but since the release of the M4, several members have contacted me about getting a set for their new rifle - so I've brought them back and have updated the kits to include the latest M4 model!!! These kits will replace pretty much all of the visible screws (and also some of the partially hidden ones like the ones on the scope rail and guiding plate) on the Impact MkI, X, MkII, M3 and M4. These stainless steel bolts will wear better and won't rust over time; it's also an inexpensive way to add a nice bit of flash and contrast to the rifle.

Each kit will come with the bolts separated in labeled bags, anti-seize compound and a spreadsheet with installation notes. The schematic and parts list for each model can be found here:

M4: https://fxairguns.com/wp-content/uploads/2024/10/F11262-Impact-M4.pdf

M3: https://fxairguns.com/wp-content/uploads/2021/04/F10370-Impact-M3-1.pdf

MkI / MkII: https://fxairguns.com/wp-content/uploads/2019/02/impact-181129.pdf


Here is a sample list of the included screws/bolts:

• Adjustable scope picatinny rail (M4)
• Front scope rail socket head cap screw (M3 and older models)
• Rear scope rail socket head cap screws (M3 and older models)
• Cheek rest socket head cap screws
• Guiding plate (the plate beneath the scope rail and cheek rest) socket head cap screws
• Cocking bolt socket head cap screw
• Pellet probe grub screw
• Trigger guard socket head cap screws
• Trigger block / power plenum socket head cap screw
• Sprint holder (the plate to the left of the power wheel) countersunk screws
• Power adjuster wheel countersunk screw
• Grip socket head cap screw
• Barrel locking grub screw
• Regulator gauge plate socket head cap screws
• Left & right rear plate socket head cap screws

Price: $50 shipped

Here are some photos of the stainless steel bolts installed on my various Impacts over the last few years: