Brand new sightron Slll never mounted $1200 shipped

Was on a Notos but not anymore. Excellent shape. $50 shipped PayPal f&f lower 48

Great condition sl30, just to powerful for my back yard. Looking for possible trades for something else. Thanks.

7 unopened tins, 500 count per tin (plus one partial).

$90 shipped CONUS. PP F&F. Not interested in trades at this time.

This is a very special custom rifle from my personal collection that will make someone very happy. It was a labor of love that I spent a lot of time on to perfect. My goal with this build was to make the rifle reliable, bulletproof, and as accurate as I possibly could with both pellets and heavier high BC slugs for field hunting, NRL22 / PRS, and benchrest. The results on paper speak for itself. Example 13 shot group at 50m through a scope cam:


Every part that I machined and fabricated from scratch use the highest quality materials that I could source, all of which contribute to the performance of this rifle. The build history was captured in several different posts on AGN and Instagram, but I'll try and recap some of the functional upgrades that I made for it.

FX Maverick .30cal

- Kraford & Lypt KL-MAV chassis - Comes with both the Compact Arca Swiss rail and a longer modified Sniper Arca Swiss rail. I also have multiple long and short K&L Picatinny T-slot rail inserts for them to run Picatinny/Weaver bipods and hardware.

- KLS-2 stock with titanium posts - Much lighter with the 6AL-4V titanium rods. This is the best stock IME for the Maverick as it allows for the shouldering point to raise up higher and it's solid. I modified / rounded the tips of two high grade cap screws for clamping the Y adjustment axis without marring up the rods like the factory set screws tend to do




- Carbon Fiber + Titanium Barrel Shrouds & Titanium Thread Protectors - Made from very high-quality (very pricey) high modulus carbon fiber from Rockwest Composites and certified 6AL-4V titanium. I made one for 500mm and the other for 600mm barrels with a revolver style titanium end cap for each of them. The end caps were designed to work with the barrel system, but they can be run on other riles using a polymer stopper that I made and they are both VERY effective at dampening barrel harmonics!









- Custom Barrel Tensioning System - Titanium locking ring integrated with the factory barrel supports. The titanium ring seats into the forward barrel support and the titanium end caps on the shroud slides over it to seat the shroud and provide the tensioning point. Works amazingly well. You can pick up the rifle by the shroud and use it as a baseball bat and not damage the barrel (not that I recommend this, but it's that SOLID!











- Titanium shorter action lever system - I milled the lever from 1.25" 6AL-4V titanium rod stock and the handle with 3/8" 6AL-4V rod stock from the same material source. It took me two tries to machine the lever perfectly (screwed up the first one one of the last machining operations), but it was well worth it! Nailed the tolerances and the cocking action feels so perfect with a high-end firearm like smoothness.









Also made a precision spring that seats against the cocking rod guide on the opposite side of the lever. Combined with the leverage "over travel" snaps the lever down snugly for field use. It took a lot of trial with different sized springs to get it JUST right, but I was able to find the perfect balance of resistance for keeping the lever closed snugly and being able to cycle ammo for rapid fire.


- Pellet & Slug Probes - I have the factory FX pellet probe in .30, a titanium pellet probe and slug probe in .30, and titanium slug probe in .22.




- Modified Magpul MIAD AR Grip - I milled and polished this grip to fit the rile. It feels AWESOME, and has interchangeable fore grip inserts that can change it from having the finger rests or a straight profile. Definitely a 1 of 1 grip for this rifle.


- Titanium cocking rod guide (threaded) with Delrin 150 (slippery grade, press fit inserts - there's (4) total components that I made from scratch for this piece. I broke the factory aluminum rod guide shooting from a bench, so I decided to make an indestructible replacement along with upgrading the cocking rod to eliminate slop (see below)

The first one I made was stainless. Eventually got the itch to make another one in titanium.


- 5/32" Music wire cocking rod - I bent the factory rod like pretty much everyone else with a Maverick / Wildcat. Went with a 5/32" music wire (C61 hardness). It's just a tiny bit larger in O.D. than the 4mm factory rod, which had way too much slop. This music wire rod was a nightmare to thread, however it has been flawless and as straight as an arrow for the duration that I have ran it. It also greatly improved the sloppy cocking action in conjunction with the titanium cocking system that I custom fabricated for this rifle.




- Modified cocking rod connector - Drilled, milled, and threaded a beefy M4 cap screw to prevent the rod / probe assembly from dislodging the (2) M3 factory set screws at high power fixing a total factory design flaw! This allows the rod connector to clamp against the rod from both sides.
- Modified AMP regulators - Using upgraded spring washers and the awesome brass + polmyer tipped adjustment screws. Shots are extremely consistent at all power levels.
- Magpul Paraclip - works great as an attachment point for a single point sling (I have more Magpul hardware to run a second one forward for dual point slings)

- Kraford & Lypt Modified Gigarail & Full Gigarail - Duracoated Pictanny.



- Kraford & Lypt Dovetail Rails - One in raw aluminum and another in black anodized. Looks like this:




- Modified cheek rest - Made it low profile as it should have been for optimal flexibility for the scope height.



- PEEK valve - More efficient with extra travel and heavier valve return spring
- Hammer weights - I have a 26gr FX Tungsten and a variety of 485 marine brass, and the factory steel.
- Hammer Springs - Standard and custom heavy spring
- Stainless hardware - 316L for the most part, all from McMaster-Carr (not the cheap overseas stainless)
- Orion Iguana Hunter deep cavity FX magazine covers - Orion designed these durable factory replacement magazine covers for me so I could shoot the old style 62 grain Varmint Knockers slugs, and they work perfectly!
- Custom made Delrin 150 bottle gauge shroud - Made a black shroud for the FX branded Wika gauge.
- Blued (male) stainless steel fill port - Looks cool
- Spare Parts - I have a bunch of spare FX factory parts for this rifle. All of the o-rings are brand spankin' new and very high quality.
- Magazines - I have (5) of the 13-shot factory .30 mags with several low profile lids from Orion, (1) grey Orion .22 mag (18-shot), (1) FX .22 mag (18-shot), and (1) high capacity .22 mag from Midwest Airguns and (1) .30 high cap mag from Midwest Airguns.

- Barrel / Rail Support Stainless Helical Thread Overhaul (18-8 stainless M3 steel Helicoil thread inserts) - The factory aluminum thread can strip out, so these completely mitigate that problem and allow for the rails to be properly torqued.







- FX Carbon Fiber Air Cylinders - I have 350cc, 480cc, 580cc. All of which have been wrapped out of the box with thick rubberized insulation.


Barrels
I have several different barrels / liners and shrouds for this rifle that shoot with sub-MOA precision: I have vetted and tuned all of them.

Match Grade 600mm TJ's .30cal (1:26) - Hammer forged CrMoly. I bought and machined several TJ blanks for this Maverick before I finally got one with a perfect bore to work with. Used a custom live piloted chamber reamer that I had Dave Kiff from Pacific Tool & Gauge make for me to machine the lead in specifically for the TJ's with a 2 degree lead and optimize it for heavy slugs and pellets. I was specifically setting it up for the original style 62 grain Varmint Knockers (sub-MOA with both the swaged slug in the hard 8.5 BHN alloy and regular soft Corbin lead), but it does well with a variety of 55-70 grain slugs. I have a bunch of 62 grain ammo that I can include with this barrel.

Meticulously lapped the bore with a micro-taper and it's a frigging laser beam. Also shoots 50.15 grain JSBs with supreme precision and it doesn't lead up nearly as fast as other barrels. I always use a good rod to clean it with a Kroil soaked cotton patch, followed by a Ballistol patch and a dry patch. The carbon fiber / titanium shroud that I made for it is the icing on the cake.

Threaded 1/2-20 UNF on the muzle end with a custom high flow 485 marine brass inlet on the breech end.

330mm TJ's .30cal (1:26 twist) - I machined this barrel from a blank to build an ultra compact configuration. Originally ran it with a DonnyFL Ronin + extension using the factory chassis and an FX cylinder from a Dreamline, but I have since dedicated DonnyFL Koi to it as part of the complete barrel system. Shoots very well with pellets and slugs.

Threaded 1/2-20 UNF on the muzzle end with a Ernet Rowe high flow brass inlet on the breech end.





- 500mm FX Superior Liner .30cal (1:37" twist) - This is a real gem of a liner. I have a high quality precision carbon fiber sleeve bonded to it with 638 Loctite. I have only shot pellets with this barrel so I don't mess up the bore with unecessary wear and tear from leading. It's been very carefully polished and I've only used a good cleaning rod with appropriate sized patches to clean it when it needs it (it shoots lights out for a long time without needing patches run through it).


500mm Shrouds - I have a carbon fiber + titanium tensioned shroud and the original FX factory aluminum 500mm shroud. I also have a custom made black Delrin shroud extension with a 7075 aluminum threaded insert (1/2-20 UNF) that I made for the factory shroud to extend it out just far enough to run a 480cc bottle. This is what it looks like in action during an NRL22 match:


- 700mm FX Superior Heavy Slug Liner (1:18" twist) - Shoots superb with the newer style 62 grain Varmint Knockers in standard soft lead.
- 700mm FX Slow Twist Pellet Liner (1:44" twist) - This liner is also very special. It was in an MK2 Impact that I bought when they came out.
- 700mm FX Slug Liner (22cal, 1:16" twist) - Excellent with pretty much every .217" slug that I've tried.
- 600mm FX Slug Liner (22cal, 1:16" twist) - ^^^^^^^
- 600mm TJ's .22 (.218/.222 1:14" twist) - Shoots rimfire size projectiles. 1/2-20 UNF threaded muzzle and the FX thread with a factor brass inlet on the breech. This one may be spoken for already, but feel free to inquire about it.


Terms:

This is a tough one to price out. I'm going to include the KLS-2 stock and titanium lever, rod guide, rod and KL-MAV chassis and a couple of magazines as part of the basic configuration for 1400 and split the shipping. Shoot me a message with the barrel(s) that you're interested in or give me your number and I can reach out to you to discuss. Can include all the above if the price is right (make me an offer).

Serious inquiries only please. Not interested in trades.

...

11 unopened tins, 150 count per tin (plus one partial).

$100 shipped CONUS. PP F&F. Not interested in trades at this time.

For sale is this like new Athlon prism scope . At 4x power , it provides some magnification while still maintaining a wide view. I used this optic as a go to on my Brocock Ranger.
Great for off hand shots at 20 to 30 yards , it's hard to beat. These sell for $280 - $290 + tax and possibly shipping...........street price. This one is being sold for $235 including tracked and insured shipping to the conus only. Not interested in trades or offers at this time. PS , this is listed on other sites. Please deal by pm. Thanks for looking...............Herb

Looking to purchase a Ed gun alpha precision, 250 mm barrel also 450 mm barrel also interested in the behemoth rail and mod

Great Feinwerkbau Model 65 Competition .177 Caliber Air Pistol. Single stroke, side lever, pneumatic.

This pistol won more International and championship matches than any other air pistol in its day.

The metal and its finish on the pistol is excellent. Includes original packaging and paperwork. Test fired and shoots like new.

$600 shipped insured.
PayPal FF please

Excellent shape OEM barrel. $150 shipped PayPal f&f Only

Hi,

I am selling/trading my Garmin Xero C1 Pro Chronograph that I bought 4 months ago. I have used it about 10 times. The condition is excellent.

Would like to sell it, or trade it for a rangefinder in the $500-1000 price range.

$420 OBO shipped CONUS PPFF

Send PM for more pictures.

Price reduced $1150

Edgun Matador R5M .22 caliber PCP pre-charged pneumatic(PCP) air rifle. In pristine condition perfect working order, no leaks. Comes with blue laminate stock (picatinny rail installed), new walnut stock (picatinny rail installed), fill probe, o-rings for a complete rebuild if needed and new spare main valve pin, spare charging handle springs (stainless installed), BAT moderator, stock moderator included, 4 magazines. This PCP is a tank, extremely accurate, and out of stock everywhere. Get a top of the line PCP air rifle for less than some garbage ones out there.

NOTE: scope, scope rings, and bipod are NOT included, but if the scope is wanted they can be included for an extra $150, scope is an Athlon Argos BTR 6-24X FFP, and UTG scope rings.

Local pickup in Layton UT or or pay actual shipping costs.

$1150

P35x is in like new condition, comes with as you see it, affixed Donnyfl Koi, zulus 5-20lrf and utg bipod. 7 boxes of 400 Zan 13g, 4 tins 350 handn 13g, 2.75 tins of jsb KO 400 13g. 5000 slugs. May trade to something in a higher caliber, and may part out as well. Message for any questions, thx.

I would like to buy a 28 inch .30 cal barrel and pellet probe for a BRK Ghost. If you also have mags I may consider those too.

Thanks,

-PJ

I have the sporter model, but have an itch to try the adjustable stock. Please let me know what you have for sale.

REPR reg. Shoots great. Has 360cc bottle. Comes with everything pictured. No issues. Been shooting hades pellets very accurately out to 100 yards at 900 fps. $1600 plus shipping.

Other items that can be added for additional $.

Donnyfl shroud kit with 1/2x20 unf: $40

Carbon fiber mlok hand guard kit with shroud 1/2x20 unf end: $120

Behemoth kit with hand guard: $250

3 mags: $60 each

Edgun spare parts kit: $80

.254 33.6gr nsa slugs, 5 boxes: $80 for all

600mm fx .22 barrel with edgun adapter and 1 mag: $300

For purchase with the gun only. Will not sell parts seperate until after the gun sells

Searching for a FX Wildcat BT

I was looking for a HW100 thumbhole stock. Prefer the adjustable comb. Please let me know what you have for sale.

nla

nla

NEW / UNFIRED

FX Dynamic 700 in .30

Will come with Saber Tactical FX Panthera Drop-Down Front Bottle Adapter ST0060 & Saber Tactical FX Dynamic Folding AR Stock Adapter Kit #20997 M131

$1400 obo shipped to you

your welcome to call or txt me at 847.715.6944 if you have any questions

((***PENDING*** ))

Hello, I have a well cared for Element Helix 6-24X50mm FFP scope and set of brand new FX No Limit rings (picatinny 30mm). The scope is in fantastic shape, zero issues. It has the APR-2D FFP MOA reticle. I sold the rifle it was on and no longer need the high end scope. The scope retails for $500 after shipping and taxes. The rings are around $100, new. So, basically its a $600 set. I'll take $350 for the scope and rings, half of new considering the shipping is free inside the United States. PayPal payments only. Feel free to reach out by call or text to Brett Williams (870) 450-8479. Thanks for looking

Hello, I have a FX Dreamline HP bottle adapter with upgraded 300 bar WIKA gauge. Works perfectly, no issues. I have sold the rifle and no longer need it. Feel free to reach out call/text to Brett Williams (870) 450-8479. PayPal payments only. Asking $100 with free shipping inside the United States. Thanks for looking

Hello, I've sold my L2 and am now selling some of the accessories that are no longer needed without the rifle. All parts are in 100% condition, no issues. Individual descriptions below.

FX 700mm .30 caliber barrel with Superior liner and Leshiy 2 barrel adapter.
Custom Carbon fiber barrel shroud extendable with Behemouth QD Tri-lug adapter installed. 1/2x20 threads under the QD adapter
Valkyrie 14.25" Carbon Fiber Handguard
Magazine holder
Fill Probe
2 Brand new .30 caliber magazine covers
New Muzzle Brake

The new cost of this set is over $900. I'm asking $500 with free delivery inside the United States. PayPal payments only. Feel free to reach out to Brett Williams (870) 450-8479 call/text. Thanks for looking