$500 shipped obo.
This Snowpeak is in excellent condition and ships with one OEM magazine and 3 Big Air magazines also includes a Huma 30 mod attatched. It will come in the original box as well. I do have some slugs i will send with it. If a scope is needed i have a couple we can discuss.

Selling Accu-Tac FC4. Great condition. I don't do much bench shooting anymore.
Asking $175 - No trades just cash. - Ships via USPS to mainland USA ground with tracking included.

Sold
FX IMPACT M3 .22 CAL SNIPER

9 OUT OF 10 IN CONDITION... I SUBTRACT ONE BECAUSE IT IS A "USED" ITEM.

$1450.00 - AS A COMPLETE KIT WITH ALL ACCESSORIES LISTED BELOW

OR $1650.00 WITH SCOPE = BLACKHOUND 6-24X50 FFP / MOA SCOPE add $200.00

BUYER PAYS 1/2 OF SHIPPING WHICH I ESTIMATE TO BE $40.00 IF YOU LIVE OUTSIDE OF THE CONT U.S. LAWS / RULES PERTAIN AND PRICE MAY INCREASE. I WILL NOT SHIP TO A LOCATION IN VIOLATION OF ANY LAWS.
I ONLY SHIP UPS FULLY INSURED AND SIGNATURE REQUIRED

SALE INCLUDES:

* DONNY FL FX MODERATOR
* K&L ARCA RAIL
* FX MAGAZINE
* REAR WIKA GAUGE
* HARD CASE

ALSO AVAILABLE * BLACKHOUND 6-24X50 FFP / MOA SCOPE FOR additional $200.00

I AM BACKING THESE SALES WITH MY PERFECT FEEDBACK RECORD (OVER 88), THAT SAID THESE GUNS BELONG TO A GREAT PERSON AND GREAT SHOOTER @GulfCoastShooter SO YOU CAN BUY WITH COMPLETE CONFIDENCE KNOWING IT WILL BE PACKED CAREFULLY, DOUBLE BOXED, INSURED FULLY AND WILL REQUIRE A SIGNATURE UPON RECEIPT! WE WILL LEAVE YOU POSITIVE FEEDBACK AND REQUEST THE SAME.

I WILL ACCEPT:
PAYPAL FF OR ADD 3.5%
ZELLE
VENMO
IF YOU WANT TO SEND A CHECK OR M.O. IT MUST CLEAR THE BANK COMPLETELY BEFORE WE WILL SHIP

YOU CAN CONTACT ME VIA:
EMAIL: [email protected]
TEXT: 251-610-8582

SCAMMERS WILL BE IMMEDIATELY FLAGGED AND REPORTED

SOLD = FX WILDCAT MK III BT SNIPER .25 CAL

9 OUT OF 10 IN CONDITION... I SUBTRACT ONE BECAUSE IT IS A "USED" ITEM.

$1300.00 - AS A COMPLETE KIT WITH SCOPE AND ALL ACCESSORIES LISTED BELOW
$1100.00 W/O SCOPE
BUYER PAYS 1/2 OF SHIPPING WHICH I ESTIMATE TO BE $40.00 IF YOU LIVE OUTSIDE OF THE CONT U.S. LAWS / RULES PERTAIN AND PRICE MAY INCREASE. I WILL NOT SHIP TO A LOCATION IN VIOLATION OF ANY LAWS.
I ONLY SHIP UPS FULLY INSURED AND SIGNATURE REQUIRED

SALE INCLUDES:

* IMPULSE AIR 1350 MODERATOR
* ATHLON ARGOS BTR GEN 2 8-34X56 SCOPE
* SABER TACTICAL BOTTLE CLAMP
* 3 FX MAGAZINES
* 1 STUD MAGAZINE
* 2 STUD MAG LOADERS

I AM BACKING THESE SALES WITH MY PERFECT FEEDBACK RECORD (OVER 88), THAT SAID THESE GUNS BELONG TO A GREAT PERSON AND GREAT SHOOTER @GulfCoastShooter SO YOU CAN BUY WITH COMPLETE CONFIDENCE KNOWING IT WILL BE PACKED CAREFULLY, DOUBLE BOXED, INSURED FULLY AND WILL REQUIRE A SIGNATURE UPON RECEIPT! WE WILL LEAVE YOU POSITIVE FEEDBACK AND REQUEST THE SAME.

I WILL ACCEPT:
PAYPAL FF OR ADD 3.5%
ZELLE
VENMO
IF YOU WANT TO SEND A CHECK OR M.O. IT MUST CLEAR THE BANK COMPLETELY BEFORE WE WILL SHIP

YOU CAN CONTACT ME VIA:
EMAIL: [email protected]
TEXT: 251-610-8582
SCAMMERS WILL BE IMMEDIATELY FLAGGED AND REPORTED

Hello all,

I’m looking for a FX Wildcat MK3 BT/Maverick 500mm barrel, shroud, and STX superior liner, probe, and at least one magazine in .25 caliber. If you don’t have the magazine, that’s fine. Feel free to message me.

thanks!

Hey All,

Letting this one go for a hell of a deal…..Amazing shooter but have settled on my FX Crown for my 100 yard benchrest gun and this one needs to go. Far to nice to just sit in the case.

This is the latest electronics, equipped with the Heliboard (original board included).

Shoots the 33.95 MK2 lights out and also the JSB Knockouts slugs INCREDIBLY well (have not tried others but have heard the .25 barrels like the mid weight slugs).

Comes with 1 magazine, single shot tray, battery, charger, heliboard, original board.

Has the PRS butt stock installed (have the bag rider attachment as well) that can be included as well as the 0dB moderator.

Scope, rings, Atlas bipod not included.

Rifle with stock butt stock 1550 and we can split the shipping.

Can negotiate for PRS butt stock and bag rider as well as the 0dB mod (tried tons of brands etc. this IS the moderator for this gun)

Looking to buy light kit for a chronograph. Pm me. Thanks

any one have a kral xs bull pup they like to part with

Looking for a Western Sidewinder Compact in .30.

Have $ or plenty to offer in trade…

Thanks, Mark

Adapted another stock for my classic dreamline, don't need this anymore. Bought on here, in great condition. $150 plus shipping from 39183

Thanks,

Spare mag I found going through my stuff.
I don’t believe I ever even used it, like new condition.
Asking $65 shipped inside conus.
Thanks!

looking to sell my beloved edgun my childhood dream gun. Looking to get $2600 for it with scuba tank dot certified. (If allowed) Price is negotiable. Preferred method of payment would be zelle, but we can use other payment methods if your werry.

It shoots amazing, I taken very good care of her. Bought in 2022 (have receipts) rarely used maybe only 100 ish shots through it. mostly sits in its case and I’m looking to get get a house so I have to sell her.
It’s built and tuned. .25 cal with .2/.2 power jets 350ci tank repr regulator and custom backblast carbon fiber moderator to a huma air moderator very quite and shoots like a dream.
Comes with gun(without the flashlight mount) scope, 2 mags, slugs, scuba tank, original box, spare valve piston parts and regulator spare parts. No issues

Selling my p-rod that’s got a few upgrades:

- balanced valve

- Huma reg

- nylon hammer

- moderator adapter

- blue fork ar-15 grip frame

Currently shoots 14.3 gr CHPs at 800 fps. Comes with one mag.
$300 + shipping. PayPal, Venmo, or Zelle accepted.

Good condition, slightly used. $120 shipped CONUS. PayPal FF accepted.

Pulled listing had to cancel trip.

Hey guys this is my build that could be yours (scope ryu and 700cc bottle in pic I’m keeping but everything is negotiable lol )
started life as a mav vp and can now run 40gen zans to 1070fps its happy place is around the 1020 mark at 185 bar but that was also around 90% humidity to so it can get better I believe. attached are numbers and the group size at 50 yards the only reason I’m trading is I want to build a new platform I’ve had this one sense the day it was released it was the first mav that Utah air sent to FL it’s my first air gun there’s a lot of love in it and a lot of phone time with Ernest figuring out how to single reg convert the mav and we did officially figure it out using factory FX parts build list includes

huma-air barrel tensioner kit with 30moa top rail
huma power kit
huma gages
huma reg with custom build and FX piston/stock regs included but are worn
FX power kit
300bar 580cc bottle yes I fill to 300bar 0 problems (filling to these pressures you are doing so at your awn risk)
700mm .22 heavy liner / huma pin and prob
700mm .22 standard liner / huma pin and probe
700mm .30 heavy liner
600mm .30 standard liner
Amazon bye pod cheep o but works great
FPE fast tune kit
I have all the stock stuff to go with it as Well
looking to trade for a panthera or I’ll consider selling for 1400

Want to swap my fx 500mm 25 caliber Fx Standard liner for a fx 600mm 25 caliber Standard liner.

I need a 600mm 25 caliber Standard liner if you have one you are willing to part with please let me know thanks. I have stuff to trade or willing to buy if price is right

Hello everyone , It's been a very long time since I posted anything for sale here in AGN classifieds but I been a long time member .
Today I'm posting this .22 FX Independence for sale hoping it goes to someone that can give it some great use , I bought the independence om April of 2019 from AOA , the plan was to take the rifle to a place where I had no access to a tank filling station but it never happened , so the rifle stayed almost untouched , I only shot it only a few times to test functionality and that was without even mounting a scope on it.
The condition of this rifle is NIB , there's not a mark on it that I can see , included with rifle is it's original box of course showing the rifle's serial number , instruction manual, one magazine a single shot tray and the test target that AOA shoots and sends with every rifle they sale , I'm also including a reseal kit I ordered at the same time when I purchased the rifle.
I paid full price for this rifle my loss is your gain , asking $ 950 with shipping included to CONUS only , the rifle if sold will be shipped very well protected double boxed via UPS ground .
Sorry no interested in trades at this time FS only
The forms o f payment I can take are Pay Pal or USPMO and I will ship when payment is cleared.
Feel free to contact me if you have any questions.
[email protected]
Pictures.

Looking for a 12 inch 12mn .25 barrel for a Talon SS.

Thanks,
Matt

Selling in great condition fx impact m3 hardly used. Cal .22
600mm barrel
$ 1800 including shipping

Accu-Shot Precision Rail Monopod-PRM-Mid-Range with Quick


Knob, Black, 4.75-5.65in, BT 13-QK


Was on my Edgun but is in good shape. asking $90 shipped lower 48 PayPal f &f

I have some top notch pcp rifles, and am trying to consolidate to only a few. I have the following and would be interested in any kind of trade, even greatly in your favor, for an Impact M4 in any caliber less than .30, but preferably a 177 or 22.

1) Airmaks Katran L 177, super shooter and as new.
2) Cricket Carbine 22 super shooter and as new
3) BSA R10 Mk2 177 super shooter and beautiful as new
4)Brocock Bantam Sniper HR 22 super shooter desert tan stock and as new

These are the cream of all the rifles I've ever had, boiled down to four, 2 of each caliber I usually shoot. I also have tons of parts for them, should they need work, as I'm anal about keeping parts for my guns. All are in excellent condition and hold air as they should, forever. The Brocock, BSA have Huma regs, I have the original reg for the BSA, and an extra Huma for the Cricket, though it's never been in the gun, as the factory reg is phenomenal. The Airmaks has a factory reg, that can keep an entire shot string below 10 fps at over 900 fps. Great guns.

I'd like to work with a talented machinist who is an established AN member who is into airguns. I don't have the tools to do the precision work on cutting down an aluminum barrel shroud etc which requires clean exact cuts and drilling specs. Essentially there are two steps, cut and then drill out for the barrel bore diameter. I absolutely need clean work so no refinishing is needed. I can't imagine this taking much time or effort.

SOLD RAW Micro Hunter .22 Camo MINT Condition $1159

Located in CT USA

$1159 by Zelle or add 3% for PayPal

Forward vertical grip/bipod, laser and moderator are included. DNT TNC225R Day-Night and Thermal Scope with ballistics not are included but PM me for the scope.
Gun Rack not included

1 Magazine included (more if I find them)

Lower ARCA rail is included