Nice older L1 classics .25 caliber and .22 caliber 350MM barrel Comes with what you see in pictures. Carm pellet dispenser, holds 16 pellets. custom Ernest Rowe
300MM barrel and moderator. Huma regulator, also has upgraded trigger plunger, firm back wall with consistent trigger brakes. Very accurate and very quiet. Shoots great with JSB Hades and JSB Exact King 25.39. With the 25 grain JSB on a 250 bar fill down to 123ish bar 16 shots @ 765 to 770 ft./s. The .22 shoot great with 18 grain JSB and 16 grain hades. 18 gain at 800 to 870ft./s, 16 Hades @ 840 to 910 ft./s.
$1050. Shipped For one barrel or $1300 for both. PayPal friends and family Venmo, or Zelle.

2 boxes of Altoros atp 50 gr slugs 6.45mm. These slugs measure .252 inches with calipers. Sent to me accidentally. $40 shipped PayPal

IMMACULATE RTI P-3 .25 cal. Zero signs of use. Zero issues. Tuned to shoot JSB 33.95 at 870fps. Very accurate. RTI hard case and booklet. Original owner. $1300 CONUS PayPal F&F or add 3%. Will pay 1/2 shipping. Stand not included. If you are concerned with my lack of feedback, I have 100% score on EBAY. Check me out here. https://www.ebay.com/itm/267135723364

Looking for a Benjamin Sterling in .20 caliber. I have several in .22 and .177, but looking for a .20 to complete this corner of my collection.
Must be minty please. Sale will be well vetted.

New Umarex Hammer .50 Cal with Camouflage Hydro dip!

New in box with free shipping. Paypal, Zelle or cash in person.

$900

6zero2-43O-O737

The .50 caliber Umarex Hammer Airgun Hunting Rifle didn’t alter the laws of physics. It just took advantage of them. The Umarex Hammer’s primary objective was to accelerate a greater mass faster using technology, ingenuity, innovation, and the big .510 caliber barrel. This unparalleled air rifle will push a 550-grain slug to 760 FPS and generate 705 ft-lbs of energy at the muzzle. Unlike a traditional firearm, the Hammer doesn’t generate a comparable report or recoil signature. A shooter in a big game hunting situation will not need to wear hearing protection when shooting the Umarex Hammer. The recoil of this big bore air rifle can best be described as a firm push, not a sharp kick like a powder burning rifle would give. Its dual-chamber precision magazine means you'll have an immediate follow-up shot if needed and each Umarex Hammer comes with two magazines. The Umarex Hammer is not just another air rifle. It’s in an air rifle hunting class all by itself.

$35 shipped PayPal F&F.

Must specify Maverick or Wildcat/DreamTac please.

Can also do custom work

Andy

View attachment Maverick Mag Holder v1.zip

Huben K1 3D printed Butt Hook with extensions and adjustable in Z direction $45 PP F&F, otherwise add 3%

Can also do custom work

Andy

JSA TSS kit and lightweight hammer for the Mrod/Armada family, asking $55 shipped

Hello I am thinking about (mainly) trading one of my edguns, being that i don’t use them all and someone else could enjoy it! This one is my 450mm .30 cal. It is very accurate and reliable. I have really only ever shot 44.8 jsb around 870 fps. Has one black slug magazine, the carbon fiber hand guard, 300cc bottle, vertical ergo grip, and a carbon fiber blow back shroud that goes over the barrel (made by another member), and i also have a spare 250mm .30 barrel that’s included. Moderators, and scope setups can be discussed as well including the thermal. I am mainly interested in trading for a .22 cal. However .25 would also be considered. I am interested in m4 impacts, pantheras, things of that nature. Thank you!!

Benjamin Marauder gen2 trigger groups
Asking $20 apiece + $5 shipping (6 assemblies available)

I have 2 sets of the Burris XTR rings for a 1 inch diameter tube at 1.5 height. I used these rings for my Bushnell Elite optics for field target.

Both sets have all of the moa inserts and the case is well intact. I am selling each for $60 shipped to you. Let me now if you have any questions. Thanks!

Awesome pistol in excellent condition, and quite versatile Zoraki HP01-2multi pump pistol in .22 with palm shelf, hard case manuals, and a slip on moderator that can go on in place of the barrel extension. Asking $315 shipped CONUS

Zelos perfection works great.
.22 , and .25 left or right hand.
Easy to load.
www.heartlandairguns.com

For Sale: New FX Crown MKI/MKII synthetic stock. This was part of an AGN classified purchase and to the best of my knowledge, never used. I have one already and don’t need another. Comes with mounting screws and brass washer. $200 shipped.

Potentially open to trades of FX Crown barrels or parts.

Original Daystate single shot tray for Red Wolf/Safaris
$20.00 shipping to USA included.
[email protected]
787 402 9751
Luis

Like new 30 mm Sports Match Xtra high rings , dovetail; may clear 60 mm objective scopes
$40.00 plus $5,00 USPS Priority to USA only.
Luis
[email protected]
787 402 9751

Selling my FX Crown MK2, 600mm barrel, 30 caliber.

$1200 shipped today and tomorrow only - no scope no rings, everything else included.

FX Carry Case
Manual
2x .30 cal FX magazines
2x 3D printed moderators/suppressors
2x hammers, stock and 12 gram tungsten (8.5 gram installed)
original single hole transfer port (dual port installed)

I bought it new year and half ago.
This crown has 600mm STX Superior liner twist rate 1:22, see photo.

MODS:
- Liner sleeved with carbon fiber pipe, not glued, CF pipe has 2.5mm thick walls, barrel was clocked correctly after CF lined was installed.
- 8.5 gram tungsten hammer installed, 12 gram tungsten hammer and stock hammer included, see photos
- Dual slot transfer port installed, original single hole transfer port included, see photos.

Current tune: 150BAR on reg, shooting NSA 43.8 slugs at 900fps.
see screen shot from 10 shot string with Extreme spread of 12fps and Standard Deviation of 3FPS

Gun is in excellent shape, shoots very well.

PRICE above SHIPPED, PayPal payment, you cover 4% fee if you pay as goods.

I am located new Lancaster PA, if you can meet in person I can get you better deal$$

I have a excellent condition KATRAN LONG BOTTLE IN 25. Have since acquired a Leopard 25 cal. Found that not a fan of folding stocks. It loves JTS 29.63 PELLETS. Not interested in trades at this time. Will split UPS shipping to lower 48. Or you send me a Pirate ship label. Pictures will follow tomorrow. $800 no scope, dose have 2 mags.
Was messaged that Utah has them for $952. I believe that is a holiday sale price of 10% off good thru tomorrow. Might be wrong on that

Excellent condition it's a hunk of aluminum so nothing really hurts it. It doesn't use a desiccant media so no maintenance needed. First stage is for oil and water, second (charcoal) stage is for taste and smell. I've never scene water past the first stage. Works great , it's just overkill for me now. $150 shipped.

In like new condition and was used for developing custom parts. Very accurate and the build quality is great and similar to the P35/Bullshark. This kit includes (I have rails and holders made in black if you want to swap out. The blue ones shows up better in photos.) bipod tri-rail, side mounted magazine holder and 6 magazines. 2 are OEM and the 4 are custom 12 shot mags. Bipod not included. Scope not included in price but can be added. The scope is a Vortex Strike Eagle 4-24x50 EBR-4 MRAD ILLUMINATED Reticle Riflescope SFP and the mount is a UTG accushot mount. Price without scope is $325 shipped to the lower 48. Add $300 for scope and rings/mount. Cashapp and M/O accepted. DM offers accepted. If you want the tri mount and mag holder in black, let me know.

​

Crosman DPMS SBR in black, comes with 3 mags, speed loader, factory sights and the original box asking $105 shipped

Nice clean K&L FX Panthera PR5 rail.
payment can be made PayPal friends and family Venmo, or Zelle.
$150.00 Shipped.

I have a barely used FX Impact M3 with all the goodies, bought a .25 and .30 and am selling my .25 because I dont use. Had it tuned for BR100 and it would should a 220-225 consitently. It comes with the following items:
FX Impact .25 700mm w/case
Stock Moderator
Saber Top Rail
Saber Arca Rail
Saber Buttstock
extra tuxing bottle
3 factory Mags
1 AfterMarket Mag
3 extra barrel liners 1 slug (new), 1 ftx superior (new), 1 Pellet liner (Used)
woods & Waters Custom wood furniture cheekrest and grip (Green Laminate)
All original parts and pieces plus a few extra smaller things.
Price is $2000.00 Firm
ALl of the Slugs and Pellets I have, at least $200.00 worth.
See Photos, Does not come with Nightforce Scope and Mounts (Unless you really want then $1800.00 Extra)

*** SOLD to Roberto *** Air Arms S-400 SL Carbine FAC .22 single shot, side lever, laminated stock.
I bought this from an AGN ad and he bought it used from AOA awhile back so I do not know the history of it.

1-Resealed gage block and fill port,(had slow leak) now holds air as it should

2-Stock was cracked at grip, has been repaired with epoxy and very well secured with a #10 construction type screw , installed going up in the grip.(tried to show crack in pictures, it is difficult to see!) cracked area is smooth, otherwise stock & finish are in Excellent condition NO DENTS OR DINGS.

3-Has adjustable lower forearm (hamster)

4-Butt plate is adjustable

5-Accessory rail on lower forward forearm

6-Metal finish appears as new

7-Barrel shroud is baffled

8-Has power adjustment knob

9-Fill adapter included

10-Recorded the following chrono information.

Does not include Bipod !!!

JTS 18.1 pellets --Power knob on HIGH---- (5) shot string 856,858,863,865,863, Average 861 FPS. spread 9FPS, STD Deviation 3.4 FPS
Power knob on LOW 473,469,473,471,480 (will actually go lower but my crony would not read)
PICTURE of five shot group at 40 yards, less than 3/8" On high, slight breeze left to right.

I am only selling this airgun to help finance the purchase of an antique air rifle. Gun will ship double boxed and well packed.
$740.00 shipped where legal only - PayPal Friends & Family, or add $25.00 to cover fees if PayPal as Goods or Services, I will also accept USPS money order.

Up for sale are a set of ATP-72 2-Pc 30mm Adjustable High Weaver Scope Mounts that are in like new condition.

High two piece 30mm Weaver mounts with adjustable elevation.
High tensile construction with a totally solid mechanism utilizing fasteners with a special anti vibration coating.

Selling for $50.00. Price includes shipping to CONUS. Payment by PayPal + 3.75% or by Zelle. Please PM me with any questions.