Tried this and worked good...

Jump to latest Follow Reply
B

billydjann

Member
Jun 3, 2015
460
11
New York, United States
Believe it or not....
but I wanted to try pellet lube again but could not locate what I did with my lube...
So, I took a dab of plumbers grease and added it to some pellets in a tin...
Rotated well enough to lube all pellets with a fine coat of lube...

Man oh Man did my groupings improve... I could not believe the difference....
Also I tried using a lubed pellet about every 10 shots or so..... still great results....

anybody else try this before...

Now you are not going to believe this.... But I was shooting at 35 yards and was getting many
4 shoots on hole deals. and not egg shaped holes either... also saw 3 shots one hole.... ... just could not get that darn fifth one to go into same hole .. I experience many 5 shot groups with two holes now..
For me that is good shooting.... but I am getting better... I still practice my 50 yard shots but still can't keep all my pellets in the 1/2 inch area... (I am working on it)

 
I've tried pellet lube before....It was kinda hit and miss on the benefits of using the process, plus it was incredibly booring. 
But I think I was lubing the wrong part!? Instead on lubing the pellets,
I used Krytech wax lubricant on the inside of my barrel.
http://www.mac1airgunshop.com/krytech-kit-w-crown-saver-p/krytechkit.htm

I have noticed that after subsequent cleanings there isn't the same amount of black soot and silver bits on the patches as there were before I started to wax the barrel.
Accuracy has maybe improved a small amount and my barrel stays much cleaner.
Mike
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu