The 174gr Raptor from High Arc Hunter in my Custom Bulldog

Forums PCP Airguns The 174gr Raptor from High Arc Hunter in my Custom Bulldog

Viewing 8 posts - 1 through 8 (of 8 total)
  • Views : 79
  • Link
    Profile photo of TheLakeRat
    TheLakeRat
    Participant
    Member

    So I’ve had these bullets for months now and finally got a day away to go to the range to see how they do.

    Of course i had to pick a day that had 20-40 mph winds.

    But overall I’m very please with the results.

    Link
    Profile photo of gunsnknives
    gunsnknives
    Participant
    Member

    Nice shooting. Impressive for an air rifle.

    Link
    Profile photo of Steadyaim
    Plinkster
    Spectator
    Spectator

    I found it strange how the pellets landed to the right of the target when the wind is blowing right to left 20-40mph? 

    Link
    Profile photo of TheLakeRat
    TheLakeRat
    Participant
    Member

    watch all the way to the end to see where my target is. I’m not shooting at the left bank of targets. I’m shooting the right bank. That way I was shooting a little more directly into the wind.
     

    Link
    Profile photo of Steadyaim
    Plinkster
    Spectator
    Spectator

    “TheLakeRat”watch all the way to the end to see where my target is. I’m not shooting at the left bank of targets. I’m shooting the right bank. That way I was shooting a little more directly into the wind.
     

    
Oh ok that explains it. I was wondering how the impact was to the right with those harsh winds. All In all good shooting especially in those conditions!

    Link
    Profile photo of TheLakeRat
    TheLakeRat
    Participant
    Member

    Thanks, I’m going to try and get back out there ASAP and see if i can do better on a calmer day. That rest i was using is a piece of Crud too so i think a good pair of bags would do better for me.
    Just been so busy with my day job and Big family that its hard to get away.

    Link
    Profile photo of PCPHUNTER
    pcphunter
    Participant
    Member

    Lake Rat Matt , you asked for it and you got it. I just posted the two new PITBULL bullet designs. Follow the link. They are both copyrighted against copying. The molds are on order. Should be in production soon. http://www.higharchunter.com/designs.html They are all the way at the bottom. They will be an AOA exclusive.

    • This reply was modified 3 months ago by pcphunter.
    Link
    Profile photo of TheLakeRat
    TheLakeRat
    Participant
    Member

    Awesome, can’ wait to try them out.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.