Let's see those custom airguns !!!

....the one here in workbench is the .25 green mtn carbine. 20 shots at 730-750-back to 730 fps with 20 gr ftt. nickle size at 40+ yards. filled to 2300 psi disco upper , prod lower.... the g.m. barrels are beautiful - recessed crown, 2" choke - just like a l.w. barrel from georgia, but blued..... since the strange o.d. on these, the ldc was custom made from : [email protected] ... it was less than $40.... this guy uses hard resins, but he's good. try him first for what you need....he made a bad-ass pickle for my crosman model 160, too !!

....the one here in workbench is the .25 green mtn carbine. 20 shots at 730-750-back to 730 fps with 20 gr ftt. nickle size at 40+ yards. filled to 2300 psi disco upper , prod lower.... the g.m. barrels are beautiful - recessed crown, 2" choke - just like a l.w. barrel from georgia, but blued..... since the strange o.d. on these, the ldc was custom made from : [email protected] ... it was less than $40.... this guy uses hard resins, but he's good. try him first for what you need....he made a bad-ass pickle for my crosman model 160, too !!

Joe the You Tubes says you need to give permission

ranedouglas, you sure like the Crosmans huh? I love my modded 1720T I use for FT pistol comps.

All I did to the Challanger (other then make a stock from a blank) is bore the port to .080" . that put it shooting at 12 FPE for the first 8-10 shots, . then it ramped up to 14FPE at the top of the bell curve. I added a Huma regulator set at 85 BAR and it sits rt below 12FPE. I wanted an inexpensive alternative to buying another Styer or Thomas for WFTF field target competitions. I shoot open now at 20 FPE. I could have taken theSteyr to 12 FPE but the Challanger was so cheap at the Crosman All American last year, I had to get.it.

The gun is lights out accurate! it is every bit as accurate as the Steyr that cost thousands more! The Challanger came in well under $500 in all...

Here is the Styer that is AZ tuned and sporting his moderator. I replaced the knee riser, pistol grip, and cheek piece with marblewood that I designed to fit me perfect.

Wow, A lot of beautiful wood out there...Good job Joe!

Custom mahogany carved by me for Wildcat .22

This is my design and build. LW .177 barrel, 350cc bottle, carbon fiber shroud, side-lever action, and it stacks pellets.
Mike

Theres a few of mine.

Theres a few of mine.

Don cothran 308 with Mike Chavka stock.

Sure have enjoyed looking at all this airgun pic ;-)

Not high style, but unusual, a bronze stock addition. 

I do have some photos snagged off the web, guns not mine but too beautiful to not save copies of, that I could post. Not sure of the etiquette.

AA Mashup 30th Anniversary wearing an Ultimate Sporter stock.

Skeletons in the Closet

"Tominco"You can use these if you want. You can also feel free to use some of my youtube vid on this stock as well. 
I don't know if it counts since it's made by FX. But, it is an upgrade option that costs quite a bit to have. 

Have fun making the video!
Tom

Click to expand...

I would love to know about this rifle. I think it's beautiful. I'm going to be selling my powder burners and getting air guns instead.