Help with a new gadget I want to make

Thanks for getting back to me but that is not what I’m looking for. What I need is a Picatinny clamp like you have on most bipod to connect to an existing Picatinny rail that can be screwed or bolted to a piece of square aluminum tubing.

That might work I’ll see if I can adapt a ring to the 1” square tube maybe I’ll switch the square tube for round tube if I can locate one that’s strong enough. Maybe I’ll do some surgery on an aluminum lawn chair. Thanks

I just ordered a length of 1.125 dia .125thick aluminum tubing. As per Perculas suggestion on one end I will attach either 1 or maybe 2 scope rings that I had laying around then I can clamp it on my Crowns bipod rail. On the other end I will attach a Picatinny rail for my bipod . I’ll then give it a few coats of spray can flat black.I will report back to all interested on how this setup should improve the accuracy of my shooting, the best way to describe it is when the balance point of the bipod is put slightly forward of the end of the barrel it seem to give you a fine tuning on your aim point resulting in better shooting results. The downside is makes the rifle a bit more clunky to handle but since I’ll be on a bench it won’t matter.