Previous

Hand Pump Question

Forums Air Tanks, Pumps, & Compressors Hand Pump Question

Viewing 6 posts - 1 through 6 (of 6 total)
  • Views : 259
  • Link
    Profile photo of MP44
    MP44
    Participant
    Member

    I am pretty sure but thought I would get a second opinion. All I would need to do to add a hose to the pump pictured below is remove the DIN adapter and screw in the hose? In other words, both the DIN and a standard pump hose has the same 1/8″ BSP threads? 

    Before anyone mentions it, I have a long micro hose from JoeB so it would not cover much of the gauge

    Link
    Profile photo of Tominco
    Tominco
    Participant
    Member

    I don’t know about that pump in particular but, this might help you out
    Tom

    • This reply was modified 3 months ago by Tominco.
    Link
    Profile photo of MP44
    MP44
    Participant
    Member

    It is a Gehmann branded FX pump

    Link
    Profile photo of spysir
    spysir
    Participant
    Member

    Tom linked a great thread thread ( couldn’t help it)  so figuring it out will be easy.

    Had the first Blue FX hand pump  – and a gen 3 – it had the 1/8th BSP threads

    Jojhn

    Link
    Profile photo of aa_limited
    aa_limited
    Participant
    Member

    get a hill mk4 or 3 pump

    Link
    Profile photo of MP44
    MP44
    Participant
    Member

    “aa_limited”get a hill mk4 or 3 pump

    
I have a MK3 that I purchased new that needs a rebuild, which I have a kit on the way. I thought it would be nice to have a back-up pump that wasn’t Chinese and didn’t cost $300

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.