I wish this forum had a section that was pinned just for parts for airguns instead of googling every time.
Upvote 0
FX Impact Schematic and list of orings.
- Thread starter gixxer3000
- Start date
Dirte,
Just a heads up if you meant to use this on the Impact: The grub screw part number C2 is M2x2 size and it requires 0.90mm allen key. The 1mm won't fit. I experienced that myself.
Reagrds,
Upvote 0
Here is the link to the complete FX Impact Drawing and Parts List from FX's support page. It is a PDF file.
FX Impact Drawing and Parts List
FX Impact Drawing and Parts List
Upvote 0
Hi guys,
I noticed that the following o rings from the drawings are called out as PUR 90
A31/ B23/ C3
Not sure why FX chose polyurethane for those particular o rings but they must have had a good reason.
I went through the entire list on oringsandmore.coms website and PUR orings don't appear to be available from them.
I noticed that the following o rings from the drawings are called out as PUR 90
A31/ B23/ C3
Not sure why FX chose polyurethane for those particular o rings but they must have had a good reason.
I went through the entire list on oringsandmore.coms website and PUR orings don't appear to be available from them.
Upvote 0
A30 and C3: 2.9mm (0.144″) X 1.78mm (0.07″) PUR 90 is the same as a -006 PUR 90A
You can buy a 5 pack for $7.89 at McMaster-Carr using this link.
B23: 2.84mm (0.112″) X 2.62mm (0.103″) PUR 90 is the same as a -104 PUR 90A
You can buy a 5 pack for $5.59 at McMaster-Carr using this link.
NOTE: A great web site to look up Metric to AS568 o-rings can be found using this link.
You can buy a 5 pack for $7.89 at McMaster-Carr using this link.
B23: 2.84mm (0.112″) X 2.62mm (0.103″) PUR 90 is the same as a -104 PUR 90A
You can buy a 5 pack for $5.59 at McMaster-Carr using this link.
NOTE: A great web site to look up Metric to AS568 o-rings can be found using this link.
Upvote 0
Your right...... I contacted them and they said they had no polyurethane orings. I was able to get some from amazon also.
Upvote 0
I'm trying to get the size of the two small o rings on the regulator adjustment screw. Or if anyone can post a link to someone selling that particular one I would appreciate it. Thanks
Upvote 0
Ag, you can buy it from this link http://www.oringsandmore.com/buna-90-o-rings-2-x-1mm-price-for-50-pcs/
Upvote 0
And they said a car engine was complicated lol 
nvm I just have low faith that my impact will come back good.
nvm I just have low faith that my impact will come back good.
Upvote 0
Yes it is a X-ring. A fellow member showed me the one he took out. I had a 2.84X2.62 X-ring that matched it.
Upvote 0
Great post,I was able to get all the orings I need ,probably enough to last a lifetime, for about the same price as the prepackaged kits cost ! Thanks guys
Upvote 0
Great list but how do you search oringsandmore.com by SKU. I enter a SKU in the search box but I get a lot of results instead of 1 result for the oring with the SKU I'm interested in.
Anyone know how to search by SKU or find all the orings listed?
Upvote 0
searching oringsandmore - the orings don't show up by SKU anymore. Does anyone have a list of the new Impact X O-rings that can be searched easily? Using the FX support Parts list I can only find 15 parts including the Delrin pucks and rubber ballsA619718O-ring 14x1,5 NBR 70A919652Delrin Puck 9,9A1119653Delrin Puck 5A1611599Rubberbaal 6,35 NBR90A1819722O-ring 9x1,5 NBR 70A2519761O-ring 2,2x1 NBR 70A2719762X-ring 3,63x2,62 NBR 70A3019720O-ring 10x1 NBR 90A315107O-ring 2,9x1,78 PUR 90B75110Rubberball 4,75 NBR 70B2219674O-ring Stop ValvetubeB2319768O-ring 2,84x2,62 PUR 90B2419722O-ring 9x1,5 NBR 70B2919677O-ring 10,5x2 NBR 70C35107O-ring 2,9x1,78 PUR 90
Upvote 0
Tip: To search by SKU you just put a star at the end of the search, like so:
4.315MMB70*
I emailed oringsandmore about this and they replied in 4 minutes. Quite impressed!
For your convenience, here's all of the o rings clickable:
Edit: Sorry, couldn't post the clickable list, the forum software messed it up every time.
4.315MMB70*
I emailed oringsandmore about this and they replied in 4 minutes. Quite impressed!
For your convenience, here's all of the o rings clickable:
Edit: Sorry, couldn't post the clickable list, the forum software messed it up every time.
Upvote 0