Tuning Fx impact leak
- Thread starter Eddy1840
- Start date
I already remplaced the Orings but still leaking air, I tight the screw and gauge, but air come out on the screw when I shoot
Upvote 0
Let me get this straight ---->. You feel and hear a leak after you take a shot only ??? Or a constant leak???
what is this big hole you taking about??? The barrel where the pellet is loaded???
what is this big hole you taking about??? The barrel where the pellet is loaded???
Upvote 0
you put loctite on the threads, if so let it cure overnight, or teflon tape on the set screw, you can remove it --- it doesn't hold pressure, only when fired.
the set screw is there to prevent the valve housing from moving to insure the transfer port holes on the housing and the action are properly lined up.
the set screw is there to prevent the valve housing from moving to insure the transfer port holes on the housing and the action are properly lined up.
Upvote 0
I'll try tomorrow. After seeing what you have done to other impacts, I would like you to tune mine..
Upvote 0