Today I was shooting and as you guys know my impact is a freak in the accuracy department to begin with. But at 60 yards I could get half inch groups in 5 shots pretty easily but not the hole 16 shots. Anyway I was practicing different holds while I shot and so rested my hand lightly in the beginning part of my telescopic shroud. I begin to fire off rounds and 10 shots later I'm left with a hole just bigger than the pellet. I remove my hand take another grouping groups are not nearly as good as with my hand rested on the shroud. This was a really uncomfortable way to shoot also. So I took electrical tape and rapped it around the shroud and the carbon fiber tank. I didn't put too much tension just enough to hold berral from so much vibration. Boys this works well at least for me I'd recommend trying this. My groups at 100 are crazy good I'll record some groups for ya
Fx impact!! ACCURACY TIP
- Thread starter Frank2533
- Start date
Electrical tape isn't holding up after 200 shots it's not sticking to the gun but it's effective maybe some sorta berral clamp would work.
Upvote 0
Great that it worked for you, but it seem's abit lo that you need electrical tape on such expensive gun...
Upvote 0
maybe changing the Barrel Guiding o-ring on location A6 from 14x1.5mm NBR70 to 14x1.5mm NBR90? And also replacing the Barrel o-ring from 10x2mm NBR70 to 10x2mm NBR90?
Upvote 0
