FX CROWN
- Thread starter 2D1C
- Start date
Thats what AOA told me last week , I hope so so I can get my replacement walnut . The stock was broken on my first one . Was told all the laminates were for filling preorders .
Upvote 0
Congrats Tibor, you got a really nice chunk of walnut on that one. I passed on getting a walnut with fear of getting a plain light colored stock. Looks like yours has some nice grain that would really pop out with a different finish if you ever desired to change it. Hope your scope shows up soon and you get to start playin.
Jimmy
Jimmy
Upvote 0
Very nice indeed!!
I was going to go laminated but have sense changed my mind. Hope they call and have a .25 in walnut.
I was going to go laminated but have sense changed my mind. Hope they call and have a .25 in walnut.
Upvote 0
Congratulations on the New Crown, I have over 4000 rounds through my .25 in black laminate and no trouble so far, I got a laminate stock because they are stronger than the walnut
especally the thin ribs around the thumb hole.
especally the thin ribs around the thumb hole.
Upvote 0
Yes I did..read every thing I got... I will clean the barrel before I do any shooting..and shooting will be without a scope..I want to give my bizzness to air gun shops and avoid ebay/amazon..just because..I will add 2 more rifles soon as well.
One thing and I researched alot over the winter is ...the 25 cal pellet is huge compared to the 177 and 20cal I have shot my whole life and might be over kill for what I want to use the rifle for...but hey I can get another barrel right..thanks for the kind words every one.
Upvote 0
Hi
Lucky guys with your Crown.
Is the supplied case large enough to hold a scoped Crown?
safe shooting
Lucky guys with your Crown.
Is the supplied case large enough to hold a scoped Crown?
safe shooting
Upvote 0
Congrats! Nice looking gun! For longer distances, the .25 is better (more wind resistance, higher BC), albeit JSB has a new .22 pellet which I think weighs the same 25gr as the .25 JSB , but don't know what the BC is.
Upvote 0
for myself and at least a few others if not all of the people that received the first shipment of Crowns, we were mailed at a later date an Impact manual. would be nice to get an actual Crown manual.
Upvote 0
I am sure the manual is not top priority with all other innovations going on, but the Crown manual should be a "low-hanging fruit" for FX which could go a long way in pleasing customers (and even creating more interest for potential customers).
Meanwhile here is the link to the Impact manual: http://www.fxairguns.com/wp-content/uploads/2015/12/Fx_impact_manual_ok.pdf
Upvote 0
I'd be happy to take pictures of the manual..so you could read..send to your email..simple!
Upvote 0
fe7565-you’re right but you’d think they’d have those manuals out just to cover their butts in terms of helping to prevent owner errors and subsequent damage claims.
tibor-pm sent.
tibor-pm sent.
Upvote 0
So I got the call and what I wanted they didn't get. He referred me to another dealer. Mine will be here Thursday!
Upvote 0