(Ended) LDC, please only ask for it if you have a gun it will fit on.

Forums AGN Swag (Ended) LDC, please only ask for it if you have a gun it will fit on.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    I have an LDC I made for a customer with 1/2 inch x 20 internal threads and a 1.025 inch opening at the rear, so this will fit air rifles with a 1 inch shroud. I think it was made for an Evanix that I had shortened the shroud on and added a 1/2 inch adapter to. It also looks like it was made for a 30 caliber gun. This will slide back over the shroud by 3.4 inches from the back of the threads on your shroud. It will NOT fit an Evanix now as they have 22mm threads on them, this was a prototype and will only fit guns with 1/2 inch  male threads. If you have a gun this will work on then post I would like to take it on the forum, the first person to post this and follow through with a PM with their name and mailing address will get the LDC, all the best, Neil.

    This will require your gun has a 1 inch shroud and about 4 inches of free shroud to attach this to. 

    MOD EDIT: Moved to SWAG section

    • This topic was modified 1 year ago by Tominco.
    Link
    Profile photo of JoeWayneRhea
    JoeWayneRhea
    Participant

    I’ll take it ..PM sent .

    Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    The LDC is still available it will not work on Joe’s gun, your gun must have a shroud that is 1 inches in OD or very close to it, the end cap will not seal on smaller shrouds. if you have a slightly larger shroud I can bore out the end cap to accommodate it, it will work best on a 25 to 30 caliber gun, Neil.

    Link
    Profile photo of Keith2324
    Keith2324
    Participant

    PM sent.

    Keith.

    Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    Shroud has gone to Keith, thanks, Neil.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.