(ENDED) Carbon fiber shroud extensions for FX.

Forums AGN Swag (ENDED) Carbon fiber shroud extensions for FX.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    I have some short pieces of carbon fiber left over, not large enough to make any decent LDC’s out of so rather than waste them I am going to put together a few shroud extensions for the FX Wildcats, these will be about 4 to 5 inches long so they will work better than the FX screw on sections. If you would like one post on here, I will take the names in the order posted and they will be the people who get the extensions according to how many I can make over the weekend, all the best, Neil.

    PS. Make sure you post the caliber of your gun and if you have the 20mm threads or 27mm threads. 

    To be eligible you must own an FX gun and be in good standing with the forum and with me. 

    • This topic was modified 11 months ago by NeilClague.
    Link
    Profile photo of linsfreak
    linsfreak
    Participant

    I would love to take one!!!!!!!
    .22 please………thanks much. Fx Wildcat……..

    Thank you
    Fitz

    • This reply was modified 11 months ago by linsfreak.
    Link
    Profile photo of Boombots74
    Boombots74
    Participant

    Neil,

    One for me if it’s still available. .25 wildcat, as for the threads, I’m not sure, currently at work, so I don’t have my baby with me. But it’s the one with 2 sections vs just the end cap. I’ll measure it when I get home.

    Thanks.

    Link
    Profile photo of RKB218
    rkb218
    Participant

    Hey Neil I would love one i have a 25 cal. Not sure of the thread size but it is one from the first batch they sent over.
    Thank you in advance.
    Robert

    Link
    Profile photo of FastEddie
    FastEddie
    Participant

    Never mind. I forgot that I used red locktite on the end pieces. Thanks for your contribution Neil.

    • This reply was modified 11 months ago by FastEddie.
    Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    Guys you must post your thread size because they did use 2 different sizes on them, if you are 100% certain that you have one from the first batch they are 27mm threads, if you know for sure you got a later gun then you have 20mm threads. If I am making these with different threads for you guys then you must post the thread size, so please edit your post and make sure it has the thread size you need, all the best, Neil.

    PS, for those who have posted already please send me your name and mailing address in a PM or mail me  neilclague@comcast.net

    • This reply was modified 11 months ago by NeilClague.
    Link
    Profile photo of Irish
    Irish
    Participant

    I would be interested in one if they are still available..  I have a brand new FX Wildcat .25 so it’s the 20mm.

    Thanks
    Irish

    Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    Irish you need to PM me with your full name and mailing address, Neil.

    Link
    Profile photo of NeilClague
    NeilClague
    Spectator

    Those who have posted up to and including Irish, please send me your full name and mailing address along with what threads you have and what caliber your gun is. I will try and get these all out before Monday, Neil.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.