Drager SCBA bottles

awesome just offered $85 plus $15 shipping

I got mine also. its 97 CU FT of air. That is alottttttttttttttttttttttttttttt of air for $350 total withJ3 Slo-Flo Valve for 4500 PSI

Drager 97 CU FT and RAW valve and hose. 

$210.00 total. Vs $700 new. 

Amazing deal

Man so glad I read your thread. I was about to spend 650

650 on an OMEGA 88 cubic ft tank 

"BigTinBoat"You should be able to just use a fill assembly like this one...it will get you from DIN to a male foster. If you have some other fill on the gun then you will need a fill probe with an adapter to get you to Male QC foster.

http://www.pyramydair.com/s/a/AirForce_Scuba_Tank_Adapter_DIN_Connector_Steel_Hose/3019

Click to expand...

OK, still learning here. I just ordered a Drager tank as well to have a backup. Currently I have an Omega from AOA with valve, gauge and fill adapter. It seems that pyramid air is out of stock on the fill adapter. Is there anything else out there that includes a gauge and fill adapter with bleed?

Something like this I guess, but it doesn't have male threads?
SCBA Hose Assembly 
Thanks 

Edit: I see tha JB offers the same assembly with threaded din (scuba vs scba I guess?) for about $$165 shipped.
So out the door for this setup for just under $300 with about 13 years life left on tank and current hydro. 

My Drager has female threads. I went with RAW valve made in the U.K.

Something like this Delladog? Most SCBA's have CGA 347 male threads.
Jimmy

I think the Dragers on EBay use threaded SCUBA DIN 300?

http://www.ebay.com/itm/2010-DRAGER-9-Liter-Carbon-Composite-SCBA-Cylinder-300-Bar-60-Minute-Duration/232207295528

I reckon some kind of adapter exists?

no adapter needed


https://www.rapidairweapons.com/xcart/product.php?productid=17765&cat=268&page=1

"BayStYat"no adapter needed


https://www.rapidairweapons.com/xcart/product.php?productid=17765&cat=268&page=1

Click to expand...

Saw that, looks similar to the Joe B kit at AirTanksFoSale.com

Dang it so my stik man adapter I ordered will not work? Says 346 or 347 valves. And mine is due Friday at 100 delivered. Well thanks on the post from RAW. Pretty inexpensive tank set Up! Where are you getting armor? I've thought about a backpack or shoulder bag.

"rancho"Dang it so my stik man adapter I ordered will not work? Says 346 or 347 valves. And mine is due Friday at 100 delivered. Well thanks on the post from RAW. Pretty inexpensive tank set Up! Where are you getting armor? I've thought about a backpack or shoulder bag.

Click to expand...

you may be able to get an adapter. I am not using any Armor. If it was a new tank then i world. But having $220 total in it, i am not worried. i will throw it in a backpack.

How long is the hose on the DIN 300 charging assembly from Rapid Air ? Is it a micro bore hose ? Do you need a male to male adapter to fill at a paintball park ?

Listed at 500 mm or almost 20", just click the link... https://www.rapidairweapons.com/xcart/product.php?productid=17765&cat=268&page=1