CO2 Advise please !

Forums General Airgunning CO2 Advise please !

Viewing 5 posts - 1 through 5 (of 5 total)
  • Views : 7
  • Link
    Profile photo of El_Teacher
    El_Teacher
    Participant
    Member

    My three CO2 pistols, a Gamo pt80 , a makarov and a walther ppk, have leaks when I put a CO2 powerlet, is it possible to fix this? I use them all to plink, but not to use them fills me with sadness.

    • This topic was modified 3 months ago by El_Teacher.
    Link
    Profile photo of T3PRanch
    T3PRanch
    Participant
    Member

    Have you tried lubing the neck end of the cartridge before installing it?

    Thurmond

    Link
    Profile photo of Kev
    Kev
    Participant
    Member

    Try some pellgun oil. You only use a small drop on tip of powerlet. If this doesn’t work you may need to replace seals,especially, the seal where powerlet tip meets seal.

    Link
    Profile photo of Smaug
    Smaug
    Participant
    Member

    “Kev”Try some pellgun oil. You only use a small drop on tip of powerlet. If this doesn’t work you may need to replace seals,especially, the seal where powerlet tip meets seal.

    
+1

    Link
    Profile photo of El_Teacher
    El_Teacher
    Participant
    Member

    Thank you gentlemen for your answers !

    Regards

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.