Can't wait to shoot it. I hope it shoots as good as it looks. I think it looks badass. Haha...pardon my french.
.30 Crown
- Thread starter brucel
- Start date
Can't wait to shoot it. I hope it shoots as good as it looks. I think it looks badass. Haha...pardon my french.
LSS152, you can buy now from Donnie. The one I have is the 2 x 6.5 inch Ronin. You will need the adapter too.
https://donnyfl.com/
BTW, you won't get a better product or deal with a nicer guy than Donnie. I sent him a text first (which is what he prefers) and he called me right back.
He has them in stock and will ship them right to you.
https://donnyfl.com/
BTW, you won't get a better product or deal with a nicer guy than Donnie. I sent him a text first (which is what he prefers) and he called me right back.
He has them in stock and will ship them right to you.
Upvote 0
Personal experience, Donny is a great guy to work with. He will get you what you need. I have a couple of Sumo moderators and one of the smaller Tatsu for my 177.
Crusher
Crusher
Upvote 0
brucel, does it just fit over the shroud? Do you still extend the shroud to shoot it? Does it affect the accuracy? I love my Crown .30 but it is a little loud for the back yard.
Upvote 0
You remove the end cap on the shroud and screw in DonnyFL adapter. The can attaches to the adapter. You can shoot it either way, but shroud extended is still best for sound. Not seeing a difference in accuracy.
Upvote 0
The cost of the Ronin is $185. The FX Crown adapter is $50. Not inexpensive but "Silence is Golden". Haha
The crown has a factory cap on the end of the barrel. See the picture below.
Replace the factory cap with the adapter from Donny. See the picture below.
Then the LDC screws on this. If you want to take the Ronin off then there is a cap from Donny that screws on the adapter so that you don't need to take the adapter off.
See below
I like the looks of Donnys cap even better than the factory cap if the LDC is not on the gun.
Hope this information helps.
The crown has a factory cap on the end of the barrel. See the picture below.
Replace the factory cap with the adapter from Donny. See the picture below.
Then the LDC screws on this. If you want to take the Ronin off then there is a cap from Donny that screws on the adapter so that you don't need to take the adapter off.
See below
I like the looks of Donnys cap even better than the factory cap if the LDC is not on the gun.
Hope this information helps.
Upvote 0
It is my experience that the same LDC on my .25 Crown does affect the POI, even with the shroud retracted.
Its also possible that accuracy is affected, but I'm not ready to swear to that as I was experimenting with a different shooting technique.
The bottom line iis that if you use one it would be best not to extend your shroud, and to always leave the ldc on when shooting.
The sound suppression with the shroud retracted and the ldc attached is pretty close to having the shroud extended without the ldc, maybe a tad more quiet.
Donny offers a smaller ldc that might not affect the POI nearly as much, and I may be testing that out. The suppression won't be as good of course, but might be worth a try.
Its also possible that accuracy is affected, but I'm not ready to swear to that as I was experimenting with a different shooting technique.
The bottom line iis that if you use one it would be best not to extend your shroud, and to always leave the ldc on when shooting.
The sound suppression with the shroud retracted and the ldc attached is pretty close to having the shroud extended without the ldc, maybe a tad more quiet.
Donny offers a smaller ldc that might not affect the POI nearly as much, and I may be testing that out. The suppression won't be as good of course, but might be worth a try.
Upvote 0
I'm thinking that maybe it's because yours is a .30 cal and maybe has a thicker barrel that isn't affected like mine.
All part of the fun
Upvote 0