.177 Wadcutter Pellets falling through Inspector

No thanks, I found a work around. I used the back half of a clear plastic CD case to put the Inspector in, then shake the pellets, so they will fall into the holes but hit the clear plastic CD case and not fall out. Using the paddle, I can turn them over, to check out the heads and then remove the paddle then check out the skirts. I'm going to make a stand off, using a piece of clear plastic, so it is far enough away from the Inspector but to where the pellets will not fall out. I found this out when checking .177 RWS R10, 7 grain pellets, where everyone of the pellets fell through the Inspector and I needed a way to check them out.