Price Drop
For sale, my custom marauder. the only stock parts are the cylinder, trigger group and the breech. I'm asking $1000 plus shipping for everything listed. **Scope and rings are not included, but I'll throw in the Donny FL Sumo for $100 more if requested. Paypal to US only.
I really love this gun, I built it last year and I'm happy with the results, but need some cash and it's just been sitting since i finished it. (I'll link to the thread here where I posted some questions and results on the project) - not an all-day shooter because of the limited cylinder size but it gets about 90 ft lbs for about 12 shots on the regulator.
https://www.airgunnation.com/topic/another-custom-marauder-build-advice-needed/
starting pressure: 3200 psi
regulator: 160 bar
Pellet: Nielson
Weight: 38.5 grn
Shot count: 12
Low: 956
Hi: 981
Avg: 975
STD Dev: 7.3
Spread: 25.0
For sale, my custom marauder. the only stock parts are the cylinder, trigger group and the breech. I'm asking $1000 plus shipping for everything listed. **Scope and rings are not included, but I'll throw in the Donny FL Sumo for $100 more if requested. Paypal to US only.
- Boyds stock
- custom aluminum trigger guard
- 28" TJ slug barrel
- longer shroud from Hill airgun (with vinyl carbon fiber wrap)
- 1/2 x 20 threaded end cap
- Huma Air large plenum regulator
- Huma Air pressure tube gauge
- bottom gauge shows regulator pressure
- tube gauge shows cylinder pressure
- Cothran Powerhouse valve
- Sample of various pellets
- approx 300 Nielsen 52grn boat tail slugs
- approx 300 Nielsen 38.5 grn slugs
- sample of various other griffen and Nielsen slugs
- Rifle bag
- 2 marauder magazines
- singleshot tray
I really love this gun, I built it last year and I'm happy with the results, but need some cash and it's just been sitting since i finished it. (I'll link to the thread here where I posted some questions and results on the project) - not an all-day shooter because of the limited cylinder size but it gets about 90 ft lbs for about 12 shots on the regulator.
https://www.airgunnation.com/topic/another-custom-marauder-build-advice-needed/
starting pressure: 3200 psi
regulator: 160 bar
Pellet: Nielson
Weight: 38.5 grn
Shot count: 12
Low: 956
Hi: 981
Avg: 975
STD Dev: 7.3
Spread: 25.0
- 981
- 981
- 979
- 974
- 977
- 979
- 979
- 977
- 977
- 974
- 963
- 956
[/LIST=1]
full disclosure: when I took it out of storage today to shoot some groups the pressure gauges were down to about 100psi. i think there is a leak at the regulator. it held ok to shoot for a couple hours but it probably needs a few new o-rings.
PM me with questions or requests for more photos. thanks.
5 shot groups at 50 yards.