I have only one long range scope for now, the Falcon X50T. It is installed on my 100 BR Impact with eaglevision two piece adjustable mounts.
Working on a f-class 308 project these days, expecting to be range ready let say within a month time. The most time consuming currently is a diy refinishing the stock.
Planning to re-use the same scope for both guns there and back, training with air and matches with 308. So the scope will be sitting on airgun probably 90% of time. (I cannot justify a dedicated Tier scope to sit in the locker on the gun that will be used only few times a year)....
Not sure yet, I want to try if feasible.
But in my calculations a single piece mount would be a better=stronger solution.
Anybody with experience?
Working on a f-class 308 project these days, expecting to be range ready let say within a month time. The most time consuming currently is a diy refinishing the stock.
Planning to re-use the same scope for both guns there and back, training with air and matches with 308. So the scope will be sitting on airgun probably 90% of time. (I cannot justify a dedicated Tier scope to sit in the locker on the gun that will be used only few times a year)....
Not sure yet, I want to try if feasible.
But in my calculations a single piece mount would be a better=stronger solution.
Anybody with experience?