Water bottles filled with air

[richedmonds]

I was with a friend in Montana and he gave me these plugs that you put in the cap of water bottles.
Wow lots of fun but now can't get any one to sell them. Any idea why and or were I can get them.
Also AOA had some air gun's targets that you shoot and pull a string and they reset. Any one can tell me where to buy beside AOA or look on the WEB sights for used ones or maybe drawing on how I can make my own,
Rich 

 

[Saltlake58]

did the plugs allow you to pump up the bottle, and make it explode when you shoot it?

 

[T3PRanch]

Are these the ones?

TC510 – THUNDER CAP SUPER SONIC TARGET VALVE[/QUOTE]http://www.doalloutdoors.com/product/tc510-thunder-cap-super-sonic-target-valve/embed/

Thurmond

 

[crittahitta]

richedmonds are you talking about a field target? It is an animal with a center hole you shoot and it falls over? If so all the big airgun stores have them. About 20 to 25 bucks a piece. There are videos on how to make them but unless you can weld and have the right metal it would probably be cheaper to buy one.

 

[Guest]

This and a drill bit will save you ten bucks.
https://www.amazon.com/ABN-Rubber-Tubeless-Standard-Vehicle/dp/B01MTGDI4Y/ref=sr_1_6?ie=UTF8&qid=1498102164&sr=8-6&keywords=tubeless+tire+valve+stem

 

[T3PRanch]

Those work oldspook, however, I had a failure on a 3 liter bottle outfitted in this way. It went off while filling at what should have been a safe pressure. The lid was found in 3 pieces so very careful drilling is required so as not to produce any hairline cracks. My hand was numb for quite a while and my ears were not happy for a period of time either. Caution should be used when filling any bottle to say the least.

Thurmond

 

[outdoorman]

I just make my own. Drill a small hole in the cap, put some silicone rubber in and let it set. Use a sports ball needle valve to add pressure. When you pull the needle valve out, the rubber seals just fine.

 

[John "spysir" Blount]

And keep the psi down, when these first came back to the airgun world some folks were really pressurizing them.
Soda, aka Pop plastic " bottles " normally are a touch thicker , may, take more psi ( still 100 should be PLENTY, too much if you child caught a cap in the eye even with safety glasses) .
That said they can be both fun and useful if well sealed and you grow Cherry's or such.

John



edit: forgot the low cost do it yourself Field Target link:

http://www.airguns.net/ft_woodfieldtarget.php

 

[richedmonds]

Thanks guy I am going to try them all even try to make my own
also I only seen the targets that AOA have that you can reset there $ was high, i will look around not a computer bug searching is not so easy for me

 

[John "spysir" Blount]

Keep us posted.

For those target with strings ( you did look at Brad's make a target from scrap link right ?) just google - oh fun fun, "surfing as it should not be- Field Targets ( add the s ) .

Some sponsors here sell some and I only clicked these 2
https://www.umarexusa.com/collections/airgun-targets

http://www.pyramydair.com/search-results-ext?Ntt=field+target&sid=1375A617A415&N=0&Ntk=primary&q=field+target&cx=002970863286801882398:jlcminxfwdw&cof=FORID:11;NB:1&saSearch#q=field%20target&category_1=Accessories

"Knockdown" from the UK makes ( did make ?) really good FT targets at a great price if you purchased 5 or more I believe, postage is better that way.