Ok here we go guys.
This is how I do it (I will not add links, just go and search since the post is automatic deleted if I add links)
I bought from AlieExpress: Manbily DT-01C (but you can use any similar tripod on ebay or amazon) US$85
Description:
Manbily DT-01C Mini Table Carbon Fibre Tripod Perfectly for Mirroless Cellphone, Gorpo Compact Camera shooting Easy to Carrying
- Model: DT-01C
- Number of Leg Sections:3
- Diameter of Legs tube:25mm/19mm
- Maximum Height:45cm
- Minimum Height:1.9cm
- Weight:0.93kg
- Load Capacity:25kg
- With B-10 panning head
Then I bought from Ebay: Set of 2 Quick Release Detach $10 bucks +-
You actually need 1, but those are handy!
Finally if you do not have it, get a tap and die set for 14 bucks or so: Standard METRIC Tap and Die Set (or borrow one)
The only mod that you need to do is make a hole in the QR 3 slot picatinny and make the threads, do not remember what thread is, but with the set is easy to figure it out (m7x1 probably), and that is all! top notch table tripod! took me less than 5 minutes to make it.
Full view
up
down
tilt
So there you go, share the love!