Valves for field filling 480cc to 480cc bottles

[MEC17670]

Hey Folks,
While I'm out in the field , I normally carry a spare 480cc bottle for my Crown. Get close to dropping of the reg, zip, zap, unscrew , install a fresh bottle.
Now that I have installed a barrel band, which makes the installation abit more difficult.
I'm wondering if anyone knows of a filling valve system to fill a 480cc to another 480cc?
Thanks,
Mike

 

[madeintheuk]

Check out edgun peazy fill system. It won’t completely fill a 480 from a 480. It will equalize the pressure though and give you some more shots. Best bet is get a 580 or 700 bottle and use the peazy.

 

[rcs9250]

I looked up the Peazy. Pretty neat set up. As long as the set up can purge the fill line so you can disconnect the Foster coupler it could work. Madeintheuk has a good point about using a 580 or 700cc bottle. Maybe a guppy would be a good compromise. The Peazy is about $175. A Air Venturi 100 cu in is $370. Nice small package but a bit pricey.

 

[Sergey1972]

Get the airventuri or similar 100cui and use the Ezfill leaves the line pressurized but bleeds the probe. Less wasted air and a pleasure to use.