Is a torque wrench required for scope installation, or can one do it by hand?
Your help is appreciated.
Your help is appreciated.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Torque Wrench for scope installation
- Thread starter BBRemedy
- Start date
It can be done by hand, dont over tighten the screws and be careful with the base, airgun bases are usually a lot softer material than powder burners so if you overtighten the base screws you might end up damaging the rail
Upvote 0
If you[ are a bull in a china shop like me. The Wheeler screw driver set. I received mine and it takes all the guess work out of tightening down those mounts and rings. I will look for the link and add it in
It is worth the price, I bought the big tool kit also, no more stripped screws
https://www.amazon.com/Wheeler-Firearms-Accurizing-Torque-Wrench/dp/B0012AXR4S/ref=sr_1_1?ie=UTF8&qid=1469915725&sr=8-1&keywords=wheeler+gunsmith+tools
It is worth the price, I bought the big tool kit also, no more stripped screws
https://www.amazon.com/Wheeler-Firearms-Accurizing-Torque-Wrench/dp/B0012AXR4S/ref=sr_1_1?ie=UTF8&qid=1469915725&sr=8-1&keywords=wheeler+gunsmith+tools
Upvote 0
I second airborne's post. Airguns (depending on caliber) do not have as much recoil as firearms. I've set my rings to about 15lbs on a UTG scope ring (4 bolts per ring) and about 22lbs per rail bolt. So far no loose bolts after a year.
Upvote 0
I have used the Wheeler torque wrench professionally for almost a decade. Good tool. Left that job about four years ago but still use it often.
Upvote 0