Donny FL Ronin .357 with M18x1 threads. This is the version with the smooth muzzle end--not the latest version. Got it for a Bulldog and it really dropped the db. However it was clipping pellets which would throw a flier from time to time. Donny made good and replaced it but I no longer have a need for this one. It should work fine for .30 caliber or perhaps somebody with the ability to machine the internals a bit to make sure it clears .357. If I remember right it mainly clipped using Air Venturi 127 flat points.
It does have a tiny blemish (my doing) on the side but otherwise in great shape. You may be able to see the blemish about halfway down on the rib. The felt needs to be replaced as I cut into three strips to leave gaps in an attempt to further dissipate the shot impulse. Not sure if that worked. =)
Paypal $110 and includes priority USPS shipping to lower 48.
Jim
It does have a tiny blemish (my doing) on the side but otherwise in great shape. You may be able to see the blemish about halfway down on the rib. The felt needs to be replaced as I cut into three strips to leave gaps in an attempt to further dissipate the shot impulse. Not sure if that worked. =)
Paypal $110 and includes priority USPS shipping to lower 48.
Jim